Sectional directional control valve
SDS180
DLS180
D1WWEB01E
2
SDS180/DLS180
8
th
edition June 2015
Simple, compact and heavy duty designed sectional valve from 1 to 12 sections for open and closed centre hydraulic systems.
Fitted with a main pressure relief valve and a load check valve on every working section
Available with parallel, tandem or series circuit.
Optional carry-over port.
A wide range of antishock+anticavitation port valves.
Intermediate sections for several types of circuit.
Available manual, pneumatic, electrohydraulic, proportional hydraulic, spool control kits.
Diameter 20 mm (0.79 in) interchangeable spools.
Additional information
This catalogue shows the product in the most standard congurations.
Please contact our Sales Dpt. for more detailed information or special requests.
WARNING!
All specications of this catalogue refer to the standard product at this date.
Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN
INCORRECT USE OF THE PRODUCT.
Features
_____________________________________________________________________________________________________
D1WWEB01E
3
SDS180/DLS180
SDS180
- Valve general informations
Working conditions . . . . . . . . . . . . . . . . . . . . page 4
Standard threads . . . . . . . . . . . . . . . . . . . . . page 4
Dimensional data . . . . . . . . . . . . . . . . . . . . . page 5
Performance data . . . . . . . . . . . . . . . . . . . . . page 5
Hydraulic circuit . . . . . . . . . . . . . . . . . . . . . . page 6
Complete sections ordering codes . . . . . . . . . page 8
Conguration with SDS180 and SDS150
valves coupling together ordering codes . . . . page 10
- Inlet section
Parts ordering codes . . . . . . . . . . . . . . . . . . page 11
Dimensional data and hydraulic circuit . . . . . page 12
Inlet relief options. . . . . . . . . . . . . . . . . . . . page 13
- Inlet section for special application
Conguration with rotary commutator . . . . . . page 16
Conguration with electric commutator . . . . . page 18
Conguration with ow cut-out . . . . . . . . . . . page 20
Conguration with priority valve . . . . . . . . . . page 22
Conf. with unloader operation spool type . . . . page 24
- Working section
Parts ordering codes (mechanical control) . . . page 26
Parts ordering codes (prop. hydraulic control) page 30
Dimensional data and hydraulic circuit . . . . . page 32
Spools . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 34
“A” side spool positioners . . . . . . . . . . . . . . . page 36
“B” side options . . . . . . . . . . . . . . . . . . . . . page 44
Complete controls . . . . . . . . . . . . . . . . . . . . page 47
Port valves . . . . . . . . . . . . . . . . . . . . . . . . . page 51
- Intermediate section
CS1 mid return manifold section . . . . . . . . . . page 58
CS3 mid return manifold section . . . . . . . . . . page 59
EI service relief valve section . . . . . . . . . . . . page 60
- Outlet section
Parts ordering codes . . . . . . . . . . . . . . . . . . page 61
Dimensional data and hydraulic circuit . . . . . page 61
_________________________________________________________________________________________________________
Index
DLS180
- Valve general informations
Working conditions . . . . . . . . . . . . . . . . . . . page 62
Standard threads . . . . . . . . . . . . . . . . . . . . page 62
Dimensional data . . . . . . . . . . . . . . . . . . . . page 63
Performance data . . . . . . . . . . . . . . . . . . . . page 63
Hydraulic circuit . . . . . . . . . . . . . . . . . . . . . page 64
Complete sections ordering codes . . . . . . . . page 65
- Inlet section
Parts ordering codes . . . . . . . . . . . . . . . . . . page 66
Dimensional data and hydraulic circuit . . . . . page 67
- Working section
Parts ordering codes (mechanical control) . . . page 68
Parts ordering codes (prop. hydraulic control) page 69
Dimensional data and hydraulic circuit . . . . . page 70
Spools . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 70
“A” side spool positioners . . . . . . . . . . . . . . . page 71
“B” side options . . . . . . . . . . . . . . . . . . . . . page 72
Complete controls . . . . . . . . . . . . . . . . . . . . page 73
- Outlet section
Dimensional data and hydraulic circuit . . . . . page 74
- Installation and maintenance . . . . . . . . . . . . . . page 75
- Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . page 76
D1WWEB01E
4
SDS180
Valve general informations
This catalogue shows technical specications and diagrams measured with mineral oil of 46mm
2
/s (46 cSt) viscosity at 40°C
(104°F) temperature.
Standard threads
_________________________________________________________________________________________
REFERENCE STANDARD
BSP UN-UNF NPTF
THREAD ACCORDING TO
ISO 228/1 ISO 263 ANSI B1.20.3
BS 2779 ANSI B1.1 unied
CAVITY DIMENSION
ACCORDING TO
ISO 1179-1 11926-1
SAE J1926-1 J476a
DIN 3852-2 shape X or Y
PORTS THREADING
MAIN PORTS BSP UN-UNF
Inlet P G 3/4 1 5/16-12 (SAE 16)
Ports A and B G 3/4 1 1/16-12 (SAE 12)
Outlet T and carry-over C G 1 1 5/16-12 (SAE 16)
PILOT PORTS
Hydraulic G 1/4 9/16-18 (SAE 6)
Pneumatic NPTF 1/8-27 NPTF 1/8-27
Working conditions
______________________________________________________________________________________
Nominal ow rating
160 l/min
42 US gpm
for series circuit 140 l/min
37 US gpm
Max pressure (
1
)
315 bar
4600 psi
for series circuit 250 bar
3600 psi
Back pressure (max.) outlet port T 25 bar
360 psi
Internal leakage (standard)
A(B)⇒T
∆p = 100 bar
(1450 psi)
5 cm
3
/min
0.30 in
3
/min
Fluid Mineral based oil
Fluid temperature
with NBR (BUNA-N) seals from -20°C to 80°C
from -4°F to 176°F
with FPM (VITON) seals from -20°C to 100°C
from -4°F to 212°F
Viscosity
operating range from 15 to 75 mm
2
/s
from 15 to 75 cSt
min. 12 mm
2
/s
12 cSt
max. 400 mm
2
/s
400 cSt
Max. contamination level -/19/16 - ISO 4406
NAS 1638 - class 10
Ambient temperature for working
conditions
with mechanical devices from -40°C to 60°C
from -40°F to 140°F
with pneumatic and hydraulic devices from -30°C to 80°C
from -22°F to 140°F
with electric devices from -20°C to 50°C
from -4°F to 122°F
NOTE - (
1
) Intermittent pressure at max. 250,000 cycles with specic internal testing.
D1WWEB01E
5
SDS180
Valve general informations
_________________________________________________________________________________________
Dimensional data
NOTE - Drawings and dimensions are referred to BSP thread conguration.
TYPE
E F Weight
mm in mm in Kg lb
SDS180/1 176
6.93
124
4.88
13.8
30.42
SDS180/2 224
8.82
172
6.77
19.2
42.33
SDS180/3 272
10.71
220
8.66
24.6
54.23
SDS180/4 320
12.60
268
10.55
30
66.14
SDS180/5 368
14.49
316
12.44
35.4
78.04
SDS180/6 416
16.38
364
14.33
40.8
89.95
0 40 80 120 160
0
5
10
15
20
0
50
100
150
200
250
0 10 20 30 40
P ⇒ A(B) pressure drop
Flow
(l/min)
Pressure
(bar)
(psi)
(US gpm)
P ⇒ A12(B12)
P ⇒ A6(B6)
P ⇒ A1(B1)
0 40 80 120 160
0
5
10
15
20
0
50
100
150
200
250
0 10 20 30 40
Flow
(l/min)
Pressure
(bar)
A(B) ⇒ T pressure drop
(psi)
(US gpm)
A1(B1) ⇒ T
A6(B6) ⇒ T
A12(B12) ⇒ T
0 40 80 120 160
0
10
20
30
40
0
100
200
300
400
500
0 10 20 30 40
P ⇒ T pressure drop
Flow
(l/min)
Pressure
(bar)
1 section
6 sections
12 sections
(psi)
(US gpm)
E
F
62
1212
14
48 48 48 14
67.5 37.5
50
175
848
293.5
100
P
P1
A1
B1
A2
B2
T1
T
34.5
116
113.5
0.31
0.55
1.891.89
1.89
2.44
0.47 0.47
3.31
11.56
1.97
3.94
6.89
1.482.66
4.57
1.36
4.47
0.55
M10 assembling holes
P
16°
2
1
3
0
16°
29°
________________________________________________________________________________________
Performance data
TYPE
E F Weight
mm in mm in Kg lb
SDS180/7 464
18.27
412
16.22
46.2
101.85
SDS180/8 512
20.16
460
18.11
51.6
113.76
SDS180/9 560
22.05
508
20.00
57
125.66
SDS180/10 608
23.94
556
21.89
62.4
137.57
SDS180/11 656
25.83
604
23.78
67.8
149.47
SDS180/12 704
27.72
652
25.67
73.2
161.38
38.5
1.52
31.5
1.24
50
1.97
14
0.55
D1WWEB01E
6
SDS180
Valve general informations
Description example:
SDS180/2/AC(YG3–120)/18L/18L/......
P
P1 A1 B1 A2 B2
175
2550
Series-parallel (tandem) circuit
It needs a special working section kit.
Tandem section is fed from the free ow pressure line; it’s excluded when an up strem section is operated.
P
P1
A1 B1 A2 B2
175
2550
Tandem section
Description example:
SDS180/2/AC(YG3–120)/18L/SP-18L/......
Parallel circuit
Standard conguration with open centre and side inlet and outlet.
Hydraulic circuit
__________________________________________________________________________________________
D1WWEB01E
7
SDS180
Valve general informations
Series circuit
A2 B2
A1 B1 A4 B4
A3 B3
P
Parallel working section PES Series working section S
Description example:
SDS180/4/AC(YG3–120)/PES-18L/PES-18L/S-18L/18L/.....
series line
tank line
Right inlet directional valve
P
P1
A2
B2
A1
B1
T1
T
P
T1 P1
T
B2 A2 B1 A1
175
2550
Description example:
SDS180/2/BC(YG3–120)/18L/18L/RC
__________________________________________________________________________________________
Hydraulic circuit
175
2550
D1WWEB01E
8
SDS180
Valve general informations
1 Inlet section * page 11
TYPE AC(YG3-175) CODE 618201005
DESCRIPTION With direct pressure relief valve
TYPE AC(XG-120) CODE 618201004
DESCRIPTION With pilot pressure relief valve
TYPE AC(SV) CODE 618201006
DESCRIPTION Without pressure relief valve
TYPE AC(YG3-120)R2 CODE 618201007
DESCRIPTION With direct pressure relief valve and rotary commutator
TYPE AC(YG3-120)R2E CODE 618201008
DESCRIPTION With direct pressure relief valve and 12VDC electric
commutator
TYPE M(LSW-120)ELNW(NC) CODE 618201009
DESCRIPTION With ow cut-out and LS pressure relief valve
TYPE ACD/VPD(LSZ-230/YG3-120) CODE 618201018
DESCRIPTION With double stage pressure relief valve and priority
valve
TYPE BCHW(LSW-250)ELNW(NO)-12VDC CODE 618201029
DESCRIPTION With unloader operation spool type and LS pressure
relief valve 12VDC
2 Working section * page 26
TYPE CODE DESCRIPTION
18L 618101003 Parallel circuit, prearranged for port
valves, double acting spool with spring
return, lever control
SP-18L 618105005 As previous with series-parallel
(tandem) circuit
1IM8IM 618101004 As parallel circuit with proportional
hydraulic control
S-18L 615111001 Series circuit, lever control
2 Working section (continued)* page 26
TYPE CODE DESCRIPTION
PES-18L 618101031 Parallel circuit, lever control to
combine with series working section
(see page 7)
RPHT-18L 618101069 Parallel circuit, prearranged for valves
with xed setting, double acting
spool with spring return, lever control
RPHSP-18L 618101070 As previous with series-parallel
(tandem) circuit
RQHT-18L 618101071 For parallel circuit without upper
predisposition for port valves
RPHT-1IM8IM 618101072 As parallel circuit, prearranged for
valves with xed setting for proportional
hydraulic control
3 Intermediate sections * page 60
TYPE CODE DESCRIPTION
EI1(YG3) 618401001 With direct pressure relief valve
4 Outlet section * page 61
TYPE CODE DESCRIPTION
RC 618301003 With side outlet
RD 618301002 With upper outlet
RE 618301001 With upper outlet and side carry-over
sleeve
RK 618301004 With upper outlet, closed center
RV 618301009 With backpressure valve
5 Fixing brackets page 79
TYPE CODE DESCRIPTION
STAF 5STA125220 Brackets with assembling screws
NOTE (*) – Codes are referred to BSP thread.
Complete sections ordering codes
___________________________________________________________________
Standard conguration with side inlet and outlet
1 2 3 4 5
SDS180 / 2 / AC(YG3-175) / 18L / EI1(YG3-180) / 18L / RC - STAF
Nr. of working
sections
1
2
3
2
4
5
5
9 10
9
10
D1WWEB01E
9
SDS180
Valve general informations
___________________________________________________________________
Complete sections ordering codes
Conguration with 2 side inlets and mid return manifold
6 Return manifold * page 58
TYPE CODE DESCRIPTION
CS1 615401010 Mid return manifold
7 Right inlet working section *
TYPE CODE DESCRIPTION
P-ED-18L 618101041 Parallel circuit, prearranged for port
valves, double acting spool with spring
return, lever control
SP-ED-18L 618101043 As previous with series-parallel
(tandem) circuit
8 Right inlet section *
TYPE CODE DESCRIPTION
BC(YG3-120) 618201025 Side inlet with direct press. relief valve
BC(XG-120) 618201026 Side inlet with pilot pressure relief valve
BC(SV) 618201027 Side inlet without pressure reliaf valve
BD(YG3-120) 618201028 Upper inlet with direct pressure relief
valve
9 Assemb. kit without intermediate section
CODE DESCRIPTION
5TIR110170 Tie rod kit for 1 working section directional valve
5TIR110218 Tie rod kit for 2 working sections directional valve
5TIR110266 Tie rod kit for 3 working sections directional valve
5TIR110316 Tie rod kit for 4 working sections directional valve
5TIR110368 Tie rod kit for 5 working sections directional valve
5TIR110410 Tie rod kit for 6 working sections directional valve
5TIR110458 Tie rod kit for 7 working sections directional valve
5TIR110506 Tie rod kit for 8 working sections directional valve
5TIR110554 Tie rod kit for 9 working sections directional valve
5TIR110602 Tie rod kit for 10 working sections directional valve
5TIR110650 Tie rod kit for 11 working sections directional valve
5TIR110698 Tie rod kit for 12 working sections directional valve
10 Assemb. kit with intermediate section
CODE DESCRIPTION
5TIR110266 Tie rod kit for 2 working sections directional valve
5TIR110316 Tie rod kit for 3 working sections directional valve
5TIR110368 Tie rod kit for 4 working sections directional valve
5TIR110410 Tie rod kit for 5 working sections directional valve
5TIR110458 Tie rod kit for 6 working sections directional valve
5TIR110506 Tie rod kit for 7 working sections directional valve
5TIR110554 Tie rod kit for 8 working sections directional valve
5TIR110602 Tie rod kit for 9 working sections directional valve
5TIR110650 Tie rod kit for 10 working sections directional valve
5TIR110698 Tie rod kit for 11 working sections directional valve
5TIR110746 Tie rod kit for 12 working sections directional valve
NOTE (*) – Codes are referred to BSP thread.
1 2 6 7 8
SDS180 / 2 / AC(YG3-120) / 18L / CS1 / ED-18L / BC(YG3-120) - STAF
5
Nr. of working
sections
5
1
2
6
7
8
5
9 10
9
9
10
10
D1WWEB01E
10
SDS180
Valve general informations
Conguration with SDS180 and SDS150 valves coupling together ordering codes
___________
1
SDS180
SDS150
SDS180/2/AC(YG3-120)/18L/18L / CS3 / 18L/18L/BC(YG3-120)/SDS150/2
1 Return manifold *
TYPE CODE DESCRIPTION
CS3 615441010 Mid return manifold
2 Assembling kit for SDS180 valve side
CODE DESCRIPTION
5TIR4161 Tie rod kit for 1 working section directional valve
5TIR4162 Tie rod kit for 2 working sections directional valve
5TIR4163 Tie rod kit for 3 working sections directional valve
5TIR4164 Tie rod kit for 4 working sections directional valve
5TIR4165 Tie rod kit for 5 working sections directional valve
5TIR4166 Tie rod kit for 6 working sections directional valve
5TIR4167 Tie rod kit for 7 working sections directional valve
5TIR4168 Tie rod kit for 8 working sections directional valve
5TIR4169 Tie rod kit for 9 working sections directional valve
5TIR416A Tie rod kit for 10 working sections directional valve
3 Assembling kit for SDS150 valve side
CODE DESCRIPTION
5TIR41501 Tie rod kit for 1 working section directional valve
5TIR41502 Tie rod kit for 2 working sections directional valve
5TIR41503 Tie rod kit for 3 working sections directional valve
5TIR41504 Tie rod kit for 4 working sections directional valve
NOTE (*) – Codes are referred to BSP thread.
1
2
3
D1WWEB01E
11
SDS180
Inlet section
_____________________________________________________________________________________
Parts ordering codes
FE SDS180 / AC (YG3 - 120) ELN - MAN 14 - 12VDC
Available congurations
AC: with side inlet, for left inlet (standard) directional valve
AD: with upper inlet, for left inlet (standard) directional valve
BC: with side inlet, for right inlet directional valve
BD: with upper inlet, for right inlet directional valve
Pressure relief valve setting (bar)
1
1 3 2 54
1 Inlet cover body * page 12
CODE: 3FIA118301-H
DESCRIPTION: Standard body
2 Parts *
TYPE CODE DESCRIPTION
- 3XTAP732200 G3/4 plug (omitted in description)
MAN18 5MAN632230 G1/8 Pressure gauge arrangement
MAN14 5MAN632231 G1/4 Pressure gauge arrangement
3 Inlet relief valve options page 13
Standard setting is referred to 10 l/min (2.6 US gpm).
SV 3XTAP535410 Relief valve blanking plug
VMP20/1 pilot operated pressure relief valve type X
(XG-120) X007211120 Range 60-315 bar
(870-4570 psi)
standard setting 120 bar (1750 psi)
(XGN-120) XCAR120313 As previous without lter
VMD20/1 direct pressure relief valve type Y (standard)
(YG2-80) 3XCAR120212 Range 63-125 bar
(900-1800 psi)
standard setting 80 bar (1150 psi)
(YG3-175) 3XCAR120213 Range 100-200 bar (1450-2900 psi)
standard setting 175 bar (2500 psi)
(YG4-250) 3XCAR120214 Range 160-320 bar (2300-4650 psi)
standard setting 250 bar (3600 psi)
Double stage relief valve (pilot port SAE 8)
(XGD-207-235) 1130040408 Setting 207 and 235 bar
(3000 and
3400 psi)
4 Inlet valve options page 15
TYPE CODE DESCRIPTION
- 3XTAP535410 Relief valve blanking plug (omitted in
description)
F 5KIT420200 Inlet anti-cavitation valve
L 3XCAR420300 Hydraulic operated
Solenoid operated unloader valve
ELN YEF08002000 Without emergency
ELP YEF08002002 Push-button emergency
ELV YEF08002003 Screw type emergency
ELT YEF08002004 Push and twist type with detent
emergency
5 Coils page 76
TYPE CODE DESCRIPTION
12VDC 4SLE001200 BER type, 12 VDC, ISO4400
connector
For complete available coils list see page 76
NOTE (*) – Codes are referred to BSP thread.
5
2
3
4
D1WWEB01E
12
SDS180
Inlet section
12
0.47
50
1.97
31.5
1.24
100
3.94
50
1.97
172.5
6.79
36.25
1.43
34.5
1.36
104
4.09
15
0.59
20
0.79
M10
175
2550
Description example:
AC(YG3–175)
Description example:
AD(YG3–175)
Description example:
BC(YG3–175)
Description example:
BD(YG3–175)
For left inlet directional
valve, side port
For left inlet directional
valve, upper port
For right inlet directional
valve, upper port
For right inlet directional
valve, side port
Dimensional data and hydraulic circuit
____________________________________________________________
24
0.94
6
0.24
P
175
P1
P
175
P1
P
175
P
255025502550
X
X = wrench 12 - 42 Nm
(31 lbft)
D1WWEB01E
13
SDS180
Inlet section
Description example: Y G 3 - 120
Valve setting (bar)Conguration
Spring type
max. 70
max. 2.76
Conguration type H: valve set and locked
Conguration type G: adjustable with screw
Direct overpressure relief valve
_______________________________________________________________________________________
Inlet valve options
0 40 80 120 160
0
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
YG2 valve setting range
Flow
(l/min)
Pressure
(bar)
(psi)
(US gpm)
min. setting
max. setting
0 40 80 120 160
0
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
YG3 valve setting range
Flow
(l/min)
Presure
(bar)
(psi)
(US gpm)
min. setting
max. setting
0 40 80 120 160
0
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
YG4 valve setting range
Flow
(l/min)
(bar)
(psi)
(US gpm)
min. setting
max. setting
Pressure
From 63 to 125 bar (from 900 to 1800 psi) From 100 to 200 bar (from 1450 to 2900 psi)
From 160 to 320 bar (from 2300 to 4650 psi)
standard setting
standard setting
standard setting
W
X
Y
X = wrench 17 - 24 Nm
(17.7 lbft)
Y = allen wrench 5
W = wrench 36 - 42 Nm
(31 lbft)
D1WWEB01E
14
SDS180
Inlet section
Description example: X G N - 120
Valve setting (bar)
Conguration
max. 73.5
max. 2.89
76.5
3.01
Conguration type Z: valve set and locked with tamper proof cap
Conguration type G: adjustable with screw
Pilot operated overpressure relief valve
Without lter
Inlet valve options
_______________________________________________________________________________________
Valve setting (bar)
0 40 80 120 160
0
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
XGD setting
207 bar (3000 psi)
235 bar (3400 psi)
Flow
(l/min)
(psi)
(US gpm)
Pressure
(bar)
86
3.38
Double stage relief valve
cap, code: 3COP118190
SAE 8
X
P
T
X
NOTE - valve available with SAE pilot; for executions
with different thread contact the Sales Dpt.
0 40 80 120 160
0
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
XG valve setting range
Flow (l/min)
Pressure
(bar)
(psi)
(US gpm)
min. setting
max. setting
standard setting
From 60 to 315 bar (from 870 to 4570 psi)
Description example: X G D - 207- 235
W
X
Y
X = wrench 13 - 24 Nm
(17.7 lbft)
Y = allen wrench 5
W = wrench 36 - 42 Nm
(31 lbft)
Z = wrench 36 - 42 Nm (31 lbft)
Y = allen wrench 36
Y
Z
D1WWEB01E
15
SDS180
Inlet section
max. 114.2
max. 4.50
Description example: AC (YG3 - 120) ELT - 12VDC
Feeding voltage:
for solenoid operated
Hydraulic operated valve: L
Solenoid operated valve: ELN
ELP
ELV
ELT
Emergency with push button and spring return; for detent posi-
tion turn the button after press it.
WARNING: the manual override option is intended for emer-
gency use, not for continuous duty operation.
39
1.54
X
Solenoid operated
Hydraulic operated
P1
P
X
P1
P
_______________________________________________________________________________________
Inlet valve options
Anti-cavitation valve
20,5
0.81
P1
P
Unloader valves
ELN: without
emergency
ELV: screw
type
ELP: push
button type
2
1
2
1
2
1
2
1
2
1
ELT: “push &
twist” type
Description example
: AC (YG3 - 120) F
Valve EL type features
Nominal ow . . . . . . . . . . . . .: 40 l/min (10.6 US gpm)
Max. pressure . . . . . . . . . . . . .: 350 bar (5100 psi)
Internal leakage . . . . . . . . . . .: 50 cm
3
/min @ 210 bar
(3.05 in
3
/min @ 3050 psi)
For coil BER see page 77
Valve L type features
Nominal ow . . . . . . . . . . . . .: 120 l/min (31.7 US gpm)
Internal leakage . . . . . . . . . . .: 10 cm
3
/min @ 100 bar
(0.61 in
3
/min @ 1450 psi)
G1/4
Portata
(l/min)
0 40 80 120 160
Pressione
(bar)
0
10
15
20
5
Pressure drop valve EL type
on SDS180/2
Pressure drop valve L type
on SDS180/2
Portata
(l/min)
Pressione
(bar)
0
2
3
4
5
0 40 80 120 160
1
70
60
50
40
30
20
10
0
(psi)
40
302010
(US gpm)
0
0
50
100
150
200
250
0
10 20 30 40
(US gpm)
(psi)
0 40 80 120 160
0
2
4
6
8
0
20
40
60
80
100
0 10 20 30 40
Pressure drop
Flow (l/min)
Pressure
(bar)
(psi)
(US gpm)
Y = wrench 36 - 42 Nm (31 lbft)
Y
X = wrench 32 - 9.8 Nm (7.23 lbft)
X
Y
manual
tightening
Y = wrench 36 - 42 Nm
(31 lbft)
D1WWEB01E
16
SDS180
Inlet section for special applications
FE SDS180 / AC ELN - 12VDC - R2
Available congurations
AC: with side inlet, for left inlet (standard) directional valve
AD: with upper inlet, for left inlet (standard) directional valve
BC: with side inlet, for right inlet directional valve
BD: with upper inlet, for right inlet directional valve
1 2 4
5
4
1
1 Inlet cover body * page 17
CODE: 3FIA118311-H
DESCRIPTION: Predisposition for rotary commutator
2 Inlet valve options page 13
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
INLET RELIEF OPTIONS
TYPE CODE DESCRIPTION
SV 3XTAP535410 Relief valve blanking plug
VMP20/1 pilot operated pressure relief valve type X
(XG-120) X007211120 Range 60-250 bar
(900-3600 psi)
standard setting 120 bar (1750 psi)
(XGN-120) XCAR120313 As previous without lter
VMD20/1 direct pressure relief valve type Y (standard)
(YG2-80) 3XCAR120212 Range 63-125 bar
(900-1800 psi)
standard setting 80 bar (1150 psi)
(YG3-175) 3XCAR120213 Range 100-200 bar (1450-2900 psi)
standard setting 175 bar (2500 psi)
(YG4-250) 3XCAR120214 Range 160-320 bar (2300-4650 psi)
standard setting 250 bar (3600 psi)
Double stage relief valve (pilot port SAE 8)
(XGD-207-235) 1130040408 Setting 207 and 235 bar
(3000 and 3400 psi)
INLET VALVE OPTIONS
F 5KIT420200 Inlet anti-cavitation valve
L 3XCAR420300 Hydraulic operated unloader valve
Solenoid operated unloader valve
ELN YEF08002000 Without emergency
ELP YEF08002002 Push-button emergency
ELV YEF08002003 Screw type emergency
ELT YEF08002004 Push and twist type with detent
emergency
3
Conguration with rotary commutator
_____________________________________________________________
3 Coils page 76
TYPE CODE DESCRIPTION
12VDC 4SLE001200 BER type, 12 VDC, ISO4400 connector
For complete available coils list see page 76
4 Commutator *
TYPE CODE DESCRIPTION
R2 5COM416203 Rotary commutator
5 Parts *
CODE DESCRIPTION
3XTAP732200 G3/4 Plug
NOTE (*) – Codes are referred to BSP thread.
2
3
D1WWEB01E
17
SDS180
Inlet section for special applications
Dimensional data and hydraulic circuit
Drawing and circuit are referred to left inlet directional valve.
175
2550
X
P
_____________________________________________________________
Conguration with rotary commutator
Rotary commutator features
Max. pressure . . . . . . . . . . . . .: 210 bar (3050 psi)
Internal leakage . . . . . . . . . . .: 3 cm
3
/min @ 100 bar
(0.18 in
3
/min @ 1450 psi)
2
1
33
1.30
34.5
1.36
169.25
6.66
50.8
2.00
76.5
3.01
62.5
2.46
31.5
1.24
115.3
4.54
11.5
0.45
55
2.16
25°
24
0.94
105
4.13
P
X
M10
15
0.59
12
0.47
Pos. 1
Pos. 2
Pos. 1
Pos. 2
100
3.94
50
1.97
W
Z
Y
Z = wrench 17 - 24 Nm
(17.7 lbft)
Y = allen wrench 5
W = wrench 36 - 42 Nm
(31 lbft)
D1WWEB01E
18
SDS180
Inlet section for special applications
FE SDS180 / AC (YG3 - 120) R2E - 12VDC
Available congurations
AC: with side inlet, for left inlet (standard) directional valve
AD: with upper inlet, for left inlet (standard) directional valve
BC: with side inlet, for right inlet directional valve
BD: with upper inlet, for right inlet directional valve
3
5
2
1 2
1
3
1 Inlet cover body * page 19
CODE: 5FIA118361
DESCRIPTION: Predisposition for electric commutator
2 Inlet valve options page 13
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
SV 3XTAP535410 Relief valve blanking plug
F 5KIT420200 Inlet anti-cavitation valve
L 3XCAR420300 Hydraulic operated unloader valve
VMP20/1 pilot operated pressure relief valve type X
(XG-120) X007211120 Range 60-250 bar
(900-3600 psi)
standard setting 120 bar (1750 psi)
(XGN-120) XCAR120313 As previous without lter
VMD20/1 direct pressure relief valve type Y (standard)
(YG2-80) 3XCAR120212 Range 63-125 bar
(900-1800 psi)
standard setting 80 bar (1150 psi)
(YG3-175) 3XCAR120213 Range 100-200 bar (1450-2900 psi)
standard setting 175 bar (2500 psi)
(YG4-250) 3XCAR120214 Range 160-320 bar (2300-4650 psi)
standard setting 250 bar (3600 psi)
Double stage relief valve (pilot port SAE 8)
(XGD-207-235) 1130040408 Setting 207 and 235 bar
(3000 and
3400 psi)
2 Inlet valve options (continued) page 15
Solenoid operated unloader valve
TYPE CODE DESCRIPTION
ELN YEF08002000 Without emergency
ELP YEF08002002 Push-button emergency
ELV YEF08002003 Screw type emergency
ELT YEF08002004 Push and twist type with detent emerg.
3 Electric commutator *
TYPE CODE DESCRIPTION
R2E 0EJ08002048 Electric commutator, ISO4400 connector
For complete available coils list see page 77
4 Coils Page 76
TYPE CODE DESCRIPTION
12VDC 4SLE001200 BER type, 12VDC, ISO4400 connector
For complete available coils list see page 76
5 Parts *
CODE DESCRIPTION
3XTAP732200 G3/4 Plug
NOTE (*) – Codes are referred to BSP thread.
4
Conguration with electric commutator
___________________________________________________________
4
Pressure relief valve setting (bar)
D1WWEB01E
19
SDS180
Inlet section for special applications
___________________________________________________________
Conguration with electric commutator
Dimensional data and hydraulic circuit
X
P
Electric commutator features
Max. pressure . . . . . . . . . . . . .: 250 bar (3600 psi)
Nominal ow . . . . . . . . . . . . .: 25 l/min (6.6 US gpm)
Internal leakage . . . . . . . . . . .: 40 cm
3
/min @ 210 bar
(2.44 in
3
/min @ 3050 psi)
For coil BER see page 77
175
2550
31.5
1.24
23.5
0.93
50
1.97
34.5
1.36
110.5
4.35
38.5
1.52
181.8
7.16
36
1.42
100
3.94
50
1.97
172
6.77
PX
26
1.02
M10
17
0.67
12
0.47
50
1.97
V
V
manual tightening
Z
Y
Z = wrench 17 - 24 Nm
(17.7 lbft)
Y = allen wrench 5
W = wrench 36 - 42 Nm
(31 lbft)
V = wrench 24 - 30 Nm (22.1 lbft)
D1WWEB01E
20
SDS180
Inlet section for special applications
SDS180 / M (LSW - 120) ELNW(NC) - MAN 14 - 12VDC
1 2 3
41
1 Inlet cover body * page 21
CODE: 5FIA118372
DESCRIPTION: With ow cut-out
2 Inlet valve options page 21
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
SV XTAP525320 Relief valve blanking plug
Main relief valve
LSW(G2) 5KIT118110 Range 5-50 bar
(72-720 psi)
standard setting 30 bar (400 psi)
LSW(G3) 5KIT118111 Range 50-200 bar (720-2900 psi)
standard setting 150 bar (2150 psi)
LSW(G4) 5KIT118112 Range 180-315 bar (2600-4550 psi)
standard setting 250 bar (3600 psi)
3 Unloader valve options page 21
TYPE CODE DESCRIPTION
ELNW(NO) 0EF08002000 Without manual emergency,
NO circuit
ELNW(NC) 0EF08002001 Without manual emergency,
NC circuit
ELTW(NO) 0EF08002004 “Push&twist” manual emergency,
NO circuit
ELPW(NO) 0EF08002002 Push-button manual emergency,
NO circuit
ELVW(NO) 0EF08002003 Screw type manual emergency,
NO circuit
4 Coils page 76
TYPE CODE DESCRIPTION
12VDC 4SLE001200 BER type, 12VDC, ISO4400 connector
For complete available coils list see page 76
5 Intermediate section * page 60
TYPE CODE DESCRIPTION
EIM(XG-220) 618421001 intermediate section with pressure
relief valve
NOTE: inlet cover with ow cut-out must be always combined with
EIM intermediate section. (See page 60).
NOTE (*) – Codes are referred to BSP thread.
Conguration with ow cut-out
______________________________________________________________________
Pressure relief valve setting (bar)
2
4
1
3
5
D1WWEB01E
21
SDS180
Inlet section for special applications
P
P
0 40 80 120 160
0
50
100
150
200
0
500
1000
1500
2000
2500
0 10 20 30 40
(psi)
(US gpm)
0
1000
2000
3000
4000
5000
0 10 20 30 40
0 40 80 120 160
0
(psi)
(US gpm)
100
200
300
400
0
1000
2000
3000
4000
5000
0 10 20 30 40
0 40 80 120 160
0
(psi)
(US gpm
)
100
200
300
400
______________________________________________________________________
Conguration with ow cut-out
Dimensional data and hydraulic circuit
LSW(G4) main relief valve
setting range
LSW(G2) main relief valve
setting range
LSW(G3) main relief valve
setting range
min. setting
standard setting
max. setting
max. setting
standard setting
min. setting
min. setting
standard setting
max. setting
Flow
(l/min)
Pressure
(bar)
Flow
(l/min)
Pressure
(bar)
Flow
(l/min)
Pressure
(bar)
From 5 to 50 bar
(from 72 to 720 psi)
From 50 to 200 bar (from 720 to 2900 psi)
From 180 to 315 bar (from 2600 to 4550 psi)
Valve diagrams
Flow
(l/min)
Pressure
(bar)
Pressure drop P ⇒ T
on ow cut-out
0
1
2
3
4
0
40
80
120
160
0
10
20
30
40
50
0
10 20 30 40
(US gpm)
(psi)
35.5
1.40
100
3.94
37.5
1.48
6
0.24
24
0.94
3.5
0.14
60
2.36
38.5
1.51
Main relief
valve
128.5
5.06
17
0.67
22
0.87
50
1.97
102
4.01
14
0.55
50
1.97
75
2.95
34.5
1.36
M10
ELTW(NO)
EIM intermediate
section see page 60
P1
ELTW
2
1
M
T
ELNW(NO):
without emergency
ELTW(NO):
“push & twist”type
ELPW(NO):
push button type
2
1
2
1
ELNW(NC):
without emergency
2
1
2
1
2
1
ELVW(NO):
screw type
U
U
manual
tightening
R
V
W
X
Y
Z
S
X = wrench 12 - 42 Nm (31 lbft)
Y = allen wrench 4
W = wrench 6 - 24 Nm
(17.7 lbft)
Z = wrench 10 - 24 Nm (17.7 lbft)
V = wrench 27 - 24 Nm (17.7 lbft)
U = wrench 24 - 30 Nm (22.1 lbft)
R = wrench 32 - 42 Nm (31 lbft)
S = allen wrench 13
D1WWEB01E
22
SDS180
Inlet section for special applications
1 Inlet cover body * page 23
CODE: 5FIA118320
DESCRIPTION: With priority valve
2 L.S. relief valve options page 23
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
LSD XCAR126215 Range 40-180 bar
(580-2600 psi)
standard setting 90 bar (1300 psi)
XCAR126213 Range 180-350 bar (2600-5000 psi)
standard setting 180 bar (2600 psi)
LSH XCAR126216 Range 40-180 bar (580-2600 psi)
standard setting 90 bar (1300 psi)
XCAR126217 Range 180-350 bar (2600-5000 psi)
standard setting 180 bar (2600 psi)
LSZ 5CAR126221 Range 40-180 bar (580-2600 psi)
standard setting 90 bar (1300 psi)
5CAR126219 Range 130-350 bar (1900-5000 psi)
standard setting 180 bar (2600 psi)
ST 5KIT126210 Relief valve blanking plug
3 Inlet valve options page 13
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
SV 3XTAP535410 Relief valve blanking plug
VMP20/1 pilot operated pressure relief valve type X
(XG-120) X007211120 Range 60-250 bar
(900-3600 psi)
standard setting 120 bar (1750 psi)
(XGN-120) XCAR120313 As previous without lter
VMD20/1 direct pressure relief valve type Y (standard)
(YG2-80) 3XCAR120212 Range 63-125 bar
(900-1800 psi)
standard setting 80 bar (1150 psi)
(YG3-175) 3XCAR120213 Range 100-200 bar (1450-2900 psi)
standard setting 175 bar (2500 psi)
(YG4-250) 3XCAR120214 Range 160-320 bar (2300-4650 psi)
standard setting 250 bar (3600 psi)
Double stage relief valve (pilot port SAE 8)
(XGD-207-235) 1130040408 Setting 207 and 235 bar
(3000 and
3400 psi)
4 Assembling kit
CODE DESCRIPTION
5TIR4161 Tie rod kit for 1 working sectional valve
5TIR4162 Tie rod kit for 2 working sectional valve
5TIR4163 Tie rod kit for 3 working sectional valve
5TIR4164 Tie rod kit for 4 working sectional valve
5TIR4165 Tie rod kit for 5 working sectional valve
5TIR4166 Tie rod kit for 6 working sectional valve
5TIR4167 Tie rod kit for 7 working sectional valve
5TIR4168 Tie rod kit for 8 working sectional valve
5TIR4169 Tie rod kit for 9 working sectional valve
5TIR416A Tie rod kit for 10 working sectional valve
NOTE (*) – Codes are referred to BSP thread.
Conguration with priority valve
____________________________________________________________________
Available congurations
AC: with side inlet, for left inlet (standard) directional valve
AD: with upper inlet, for left inlet (standard) directional valve
BC: with side inlet, for right inlet directional valve
BD: with upper inlet, for right inlet directional valve
L.S. valve setting
3
2
1
valve setting
4
FE SDS180 / ACD / VPD (LSZ - 230 \ YG3 - 120) - SAE
1 2
3
D1WWEB01E
23
SDS180
Inlet section for special applications
_____________________________________________________________________
Conguration with priority valve
Dimensional data and hydraulic circuit
P
M CF
Ls
230
250
Grain
security for ow
limits available on
request, code:
3VIT210100
Load Sensing pressure
relief valves
Regulated ow
(l/min)
Stand-by pressure
(bar)
0
(psi)
(US gpm)10
120
6420
30
0
2
10
0 10 20 30 40
Stand-by pressure vs. regulated ow
for various values of inlet ow
8
6
4
60
90
8
175.5
6.91
118
4.64
77.5
3.05
79.5
3.13
M10
15
0.59
56
2.20
21
0.83
71.5
2.81
56
2.20
11.5
0.45
50.7
2
89.7
3.53
100
3.94
34.5
1.36
C = Qin= 150 l/min
(39.62 US gpm)
A = Qin= 50 l/min
(13.21 US gpm)
B = Qin= 100 l/min
(26.42 US gpm)
LSD: with blind nut
LSH: arranged for
lead sealing
LSZ: with tamper proof
cap
ST: valve blanking plug
21
0.83
17
0.70
34
1.34
3.5
0.14
code:
4COP116420
(l/min)
0 120
100
0
200
300
400
(bar)
40 80 160
(l/min)
0 120
100
0
200
300
400
(bar)
40 80 160
LSH, LSD valve and LSZ setting range
From 40 to 180 bar (from 580 to 2600 psi)
Valve diagrams
LSH and LSD valve setting range
From 180 to 350 bar (from 2600 to 5100 psi)
LSZ valve setting range
From 180 to 350 bar (from 2600 to 5100 psi)
(l/min)
0 120
100
0
200
300
400
(bar)
40 80 160
min. setting
max. setting
standard setting
min. setting
taratura massima
standard setting
U
V
W
X
Y
X = wrench 12 - 42 Nm
(31 lbft)
Y = allen wrench 5
W = wrench 6 - 24 Nm
(17.7 lbft)
V = wrench 13 - 24 Nm (17.7 lbft)
U = wrench 36 - 42 Nm (31 lbft)
max. setting
standard setting
min. setting
Flow
Pressure
Flow
Pressure
Flow
Pressure
0
1000
2000
3000
4000
5000
(psi)
(US gpm)
0 10 20 30 40
0
1000
2000
3000
4000
5000
(psi)
(US gpm)
0 10 20 30 40
0
1000
2000
3000
4000
5000
(psi)
(US gpm)
0 10 20 30 40
A
C
B
A
B
B
A
A = chiave 10 - 9,8 Nm
B = chiave 13 - 42 Nm
C = chiave 3
D1WWEB01E
24
SDS180
Inlet section for special applications
SDS180 / BCHW (LSW - 250) ELNW(NO) - 12VDC
Pressure relief valve setting (bar)
1 2 3
1 Inlet cover body * page 25
CODE: 5FIA118373
DESCRIPTION: with unloader operation spool type
2 Inlet relief valve options page 25
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
SV XTAP525320 Relief valve blanking plug
Main relief valve
LSW(G2)FC07 5KIT118120 Range 5-50 bar
(72-720 psi)
standard setting 30 bar (400 psi)
LSW(G3)FC07 5KIT118121 Range 50-200 bar (720-3200 psi)
standard setting 150 bar (2150 psi)
LSW(G4)FC07 5KIT118122 Range 180-315 bar (2600-4550 psi)
standard setting 250 bar (3600 psi)
3 Pilot solenoid valve options page 25
TYPE CODE DESCRIPTION
ELNW(NO) 0EF08002000 Without manual emergency,
NO circuit
ELNW(NC) 0EF08002001 Without manual emergency,
NC circuit
ELTW(NO) 0EF08002004 “Push&twist” manual emergency,
NO circuit
ELPW(NO) 0EF08002002 Push-button manual emergency,
NO circuit
ELVW(NO) 0EF08002003 Screw type manual emergency,
NO circuit
4 Coils page 76
TYPE CODE DESCRIPTION
12VDC 4SLE001200 BER type, 12VDC, ISO4400 connector
For complete available coils list see page 76
NOTE (*) – Codes are referred to BSP thread.
4
Conguration with unloader operation spool type
______________________________________________
3
4
2
1
D1WWEB01E
25
SDS180
Inlet section for special applications
______________________________________________
Conguration with unloader operation spool type
Dimensional data and hydraulic circuit
Pressure drop P ⇒ T
with unloader operation spool type
on SDS 180/4
Flow (l/min)
Pressure
(bar)
0
2,5
5
7,5
10
0
40
80
120
160
0
250
500
750
1000
1250
0
10 20 30 40
(US gpm)
(psi)
60
2.36
125
4.92
173
6.81
37.5
1.48
2
0.08
100
3.94
M10
17
0.67
Main relief valve
ELTW (NO)
22
0.87
50
1.97
34.5
1.36
38.5
1.52
113,5
4.47
max. 95
3.74
P
P
2
1
3600
ELTW(NO)
250
P
T
ELNW(NO):
without emergency
ELTW(NO):
“push & twist”type
ELPW(NO):
push button type
2
1
2
1
ELNW(NC):
without emergency
2
1
2
1
2
1
ELVW(NO):
screw type
Valve diagrams
NOTE – For other valve diagrams see page 21.
manual
tightening
R
V
Y
W
X = wrench 8 - 24 Nm
(17.7 lbft)
Y = wrench 10 - 24 Nm (17.7 lbft)
W = allen wrench 4
V = wrench 13
U = wrench 24 - 30 Nm
(22.1 lbft)
R = wrench 32 - 42 Nm (31 lbft)
X
U
U
D1WWEB01E
26
SDS180
Working section
Parts ordering codes (mechanical control)
_______________________________________________________
EL SDS180 / (P) - 1 8 L . P1 (G3 - 100)
4 5a1 2a 3
Pressure relief valve setting (bar)
EL SDS180 / RPHT - 1 8 L . U (100)
4 5b1 2a 3
Pressure relief valve xed setting (bar)
1
2a
3
4
5a
5a
6
7
3
4
7
1
2a
5b
5b
RPHT
6
7
1
2b
3
4
5b
5b
RPH5LL
6
EL SDS180 / RPH5LL - 5HFLL 8 L . U (100)
4 5b1 2b 3
Pressure relief valve xed setting (bar)
P type omitted in description
5c
D1WWEB01E
27
SDS180
Working section
_______________________________________________________
Parts ordering codes (mechanical control)
1 Working section kit * page 30
TYPE CODE DESCRIPTION
P 5EL1183000 For parallel circuit (omitted in
description)
5EL1183000C As previous , for spool positioners
8MG3, 8MG19/29(NO), 8PDG,
8PG, 8EPDG3, 8EPG3, 11A,
8PGCR and 8EPG3
SP 5EL3183001 For tandem circuit
S 5EL2163000 For series circuit
P5 5EL1183201 For parallel circuit and oating circuit
PES 5EL1163000 For parallel circuit, for valve with
series circuit (page 7)
PHT 5EL1183080 For parallel circuit, for spools 1TX
and 1TYD
PHD 5EL1183020 For parallel circuit, for spools 1CSG
and 1CSGH
RPHT 5EL1183057-H For parallel circuit with upper
arrangement for xed setting port
valves
RPH5 5EL1183250-H For parallel circuit with oating
circuit with upper arrangement for
xed setting port valves
RPHSP 5EL1183059-H For tandem circuit with upper
arrangement for xed setting port
valves
RSP5 5EL3183250-H For tandem circuit with oating
circuit with upper arrangement for
xed setting port valves
RQHT 5EL1183056-H For parallel circuit without upper
arrangement for port valves
RPH5LL 5EL1183065-H For parallel circuit with oating
circuit with with arrangement _
for low leak valve for spool 5HFLL
2a Spools** page 34
TYPE CODE DESCRIPTION
1 3CU2510100 Double acting, 3 positions, with A
and B closed in neutral position
1(11A) 3CU2510321 As previous, need spool positioner
11A and dedicated working
section kit
1CS 3CU2510200 As type 1, sensitive type
1CSG 3CU2510250 Double acting with A and B closed in
neutral position, B partially connect
to tank in position1, A partially
connect to tank in position 2; for
section kit PHD
1CSGH 3CU2510251 As previous, sensitive type; for
section kit PHD
1A 3CU2521100 Double acting, 3 positions, with A
open to tank in neutral position
1B 3CU2522100 Double acting, 3 positions, with B
open to tank in neutral position
1D 3CU2510210 As type 1, sensitive type for ow up
to 100 l/min
(26.42 USgpm)
1TX 3CU2510601 Double acting with A and B closed in
neutral position, B partially connect
to tank in position 1, A partially
connect to tank in position 2; needs
section kit PHT
2a Spools (continued)** page 34
TYPE CODE DESCRIPTION
1TYD 3CU2510603 As previous, B with restricted
connection to tank; needs section
kit PHT
2 3CU2525100 Double acting, 3 positions, with A
and B open to tank in neutral position
2H 3CU2525225 Double acting 3 positions, with A
and B partially open to tank
in neutral position
3 3CU2531100 Single acting on A, 3 positions, B
plugged; requires G3/4 plug
4 3CU2535100 Single acting on B, 3 positions, A
plugged; requires G3/4 plug
5 3CU2541200 Double acting spool with A and
B closed in neutral position,
4 positions, with spool in, oating
4
th
position: need dedicated
positioner kit type 13MD
5B 3CU2541203-H Double acting spool with A and B
closed in neutral position,
4 positions, with spool out, oating
4
th
position: need dedicated
positioner kit type 13C
8PF 3CU2561210 Double acting 3 positions,
regenerative circuit in 3
rd
position
with spool in: need dedicated
positioner kit
8PFG 3CU2561215 Double acting 3 positions,
regenerative circuit in 2
nd
position
with spool out: need dedicated
positioner kit
2b Spools** page 34
TYPE CODE DESCRIPTION
5HFLL 3CU2541209-H Double acting spool with A and B
closed in neutral position,
4 positions, with spool in, oating
4
th
position: for RPH5LL working
section kit
3 “A” side spool positioners page 36
TYPE CODE DESCRIPTION
8 5V08110000 With spring return in neutral position
8TL 5V08110310 As type 8, for exible cable control
8F2 5V08110101 As type 8 with adjustable stroke
limiter
11 5V11110000 Detent in positions neutral, 1 and 2
12 5V12110000 Detent in positions 1 and 2
15 5V15110000 2 positions, detent in positions 1
and neutral
16 5V16110000 2 positions, detent in positions 2
and neutral
9BZ 5V09110030 With detent in position 1 and spring
return in neutral position
10BZ 5V10110030 With detent in position 2 and spring
return in neutral position
11BZ 5V11110030 Detent in positions 1 and 2 and
spring return in neutral position
continued
NOTE (*) – Codes are referred to BSP thread.
(**) For special features of the various spools please contact our
Sales Dpt
D1WWEB01E
28
SDS180
Working section
3 “A” side spool positioners (cont.) page 36
TYPE CODE DESCRIPTION
8MG3 5V08110050 As type 8, operation with
microswitch (NO) in positions 1 and
2
(1)
8MG19/29(NO) 5V08110080 As type 8, operation with 2
microswitch (NC) in positions 1 and
2
(1)
8RMN2 5V08416030 12 VDC with electromagnetic detent
5V08416040 24 VDC with electromagnetic detent
8K 5V08710112 As type 8 and 12 VDC solenoid lock
device
5V08710124 As previous, 24 VDC
8PDG 5V08110710 ON/OFF pneumatic waterproof kit
(1)
8PG 5V08110708 ON/OFF pneumatic kit
(1)
8EPDG3 5V08110740 12 VDC ON/OFF pneumatic
waterproof kit
(1)
5V08110738 24 VDC ON/OFF pneumatic
waterproof kit
(1)
8EPG3 5V08110725 12 VDC ON/OFF electro-pneumatic
kit
(1)
5V08110726 24 VDC ON/OFF electro-pneumatic
kit
(1)
8EI3 5V08110320 12 VDC ON/OFF electro-hydraulic kit
5V08110321 24 VDC ON/OFF electro-hydraulic kit
11A 5V11510110 With detent in positions 1 and 2,
automatic release in neutral
position
(2)
13MD 5V13416010 4 positions, detent in 4
th
position
with spring return in neutral
position with detent pull type.
Needs spool type 5
13C 5V13116005 4 positions, detent in 4
th
pos. with
spring return in neutral pos. with
detent push type. Needs spool
type 5B
Positioner kit for 8PF and 8PFG regenerative spools:
Overall dimensions are the same ones as those of standard controls
listed above.
8CR 5V08110020 With spring return in neutral position
9BCR 5V09110020 With detent in position 1 and spring
- return in neutral position
8PGCR 5V08110706 ON/OFF pneumatic kit
(1)
8EPG3CR 5V08110727 12 VDC electro-pneumatic kit ON/
OFF
(1)
5V08110728 24 VDC electro-pneumatic kit ON/
OFF
(1)
8EI3CR 5V08110357 12 VDC electro-hydraulic kit ON/
OFF
5V08110353 24 VDC electro-hydraulic kit ON/
OFF
4 “B” side options page 44
TYPE CODE DESCRIPTION
L 5LEV110000 Standard lever box
LF1 5LEV110101 Lever box with spool stroke limiter
in position 1
LB 5LEV310000 Steel lever kit
LCB 5CLO216100 Joystick lever for 2 sections
operation
LCE 5CLO216050 As previous with bronze support
SL -- Without lever box
SLP 5COP110000 Without lever box, with dust-proof
plate
TQ 5TEL110110 Flexible cable connection; for CD
cables
5a Port valves page 51
Valves standard setting is referred to 10 l/min (2.64 USgpm) ow.
TYPE CODE DESCRIPTION
- XTAP530361 Valve blanking plug (omitted in
description)
C 3XCAR416100 Anti-cavitation valve
Anti-shock valve
P(G2) XCAR216115 Range 50-120 bar
(725-1750 psi)
standard setting 63 bar (900 psi)
P(G3) XCAR216116 Range 100-250 bar
(1450-3600 psi)
standard setting 100 bar
(1450 psi)
P(G4) XCAR216117 Range 160-315 bar
(2300-4600 psi)
standard setting 200 bar (2900 psi)
Pilot hydraulic unloader valve
PX XCAR416301 Pilot hydraulic unloader valve
Anti-shock and anti-cavitation valve
U(G2) X011411099 Range 35-90 bar
(510 -1300 psi)
standard setting 60 bar (870 psi)
U(G3) X011411100 Range 90-250 bar
(1300-3600 psi)
standard setting 100 bar (1800 psi)
U(G4) X011411101 Range 180-350 bar
(2600-5100 psi)
standard setting 200 bar (2900 psi)
Pilot operated anti-shock and anti-cavitation valve
UXW(G) X01141B160 Range 63-315 bar
(900-4600 psi)
standard setting 160 bar (2300 psi)
NOTE (1) - Needs dedicated working section kit.
(2) - Needs dedicated working section kit and type spool 1(11A).
Parts ordering codes (mechanical control)
_______________________________________________________
D1WWEB01E
29
SDS180
Working section
5b Port valves page 56
For RPH and RPH5LL working section kit
TYPE CODE DESCRIPTION
UT XTAP522441 Valve blanking plug
C 5KIT410000 Anticavitation valve
Fixed setting antishock and anticavitation valves:
setting is referred to 10 l/min
(2.6 US gpm)
U025 5KIT330025 Setting 25 bar (363 psi)
U030 5KIT330030 Setting 30 bar (435 psi)
U040 5KIT330040 Setting 40 bar (580 psi)
U050 5KIT330050 Setting 50 bar (725 psi)
U063 5KIT330063 Setting 63 bar (914 psi)
U080 5KIT330080 Setting 80 bar (1150 psi)
U100 5KIT330100 Setting 100 bar (1450 psi)
U110 5KIT330110 Setting 110 bar (1590 psi)
U125 5KIT330125 Setting 125 bar (1800 psi)
U140 5KIT330140 Setting 140 bar (2050 psi)
U150 5KIT330150 Setting 150 bar (2150 psi)
U160 5KIT330160 Setting 160 bar (2300 psi)
U175 5KIT330175 Setting 175 bar (2550 psi)
U190 5KIT330190 Setting 190 bar (2750 psi)
U200 5KIT330200 Setting 200 bar (2900 psi)
U210 5KIT330210 Setting 210 bar (3050 psi)
U220 5KIT330220 Setting 220 bar (3190 psi)
U230 5KIT330230 Setting 230 bar (3350 psi)
U240 5KIT330240 Setting 240 bar (3500 psi)
U250 5KIT330250 Setting 250 bar (3600 psi)
U260 5KIT330260 Setting 260 bar (3750 psi)
U270 5KIT330270 Setting 270 bar (3900 psi)
U280 5KIT330280 Setting 280 bar (4050 psi)
U290 5KIT330290 Setting 290 bar (4200 psi)
U300 5KIT330300 Setting 300 bar (4350 psi)
U310 5KIT330310 Setting 310 bar (4500 psi)
5c Low leak valves page 56
TYPE CODE DESCRIPTION
LL 5KIT918002 Low leak valve
6 Port plugs *
CODE DESCRIPTION
3XTAP732200 G3/4 Plug
7 Optional handlevers
TYPE CODE DESCRIPTION
AL01/M10x200 170012020 For L lever box, L= 200 mm
(7.87 in)
AL08/M12x250 170013125 For LCB joystick, L= 250 mm (9.84 in)
NOTE (*) – Codes are referred to BSP thread.
7
6
_______________________________________________________
Parts ordering codes (mechanical control)
D1WWEB01E
30
SDS180
Working section
Parts ordering codes (proportional hydraulic control)
________________________________________
EL SDS180 / (P) - 1IM 8IM . U1 (G3 - 100)
4a
1 2a
Pressure relief valve setting (bar)
3
EL SDS180 / RPHT - 1IM 8IM L . U (100)
4 5b1 2a 3
Pressure relief valve xed setting (bar)
EL SDS180 / RPH5LL - 5HFLL 8IM L . U (100)
4 5b1 2b 3
Pressure relief valve xed setting (bar)
1
2a
3
3
4a
4a
5
P type omitted in description
1
3
3
2b
4b
4b
RPH5LL/IM
5
RPHT/IM
2a
3
3
1
4b
4b
5
4c
D1WWEB01E
31
SDS180
Working section
1 Working section kit * page 32
TYPE CODE DESCRIPTION
P/IM 5EL1183000A For parallel circuit with proportional
hydraulic control (omitted in
description)
P5/IMP 5EL1183205A As previuos for oating circuit: need
spool type 5IMP and complete
controls 13IMP
SP/IM 5EL3183001B With tandem circuit
SP5/IM 5EL3183202 As previuos for oating circuit
PHD/IM 5EL1183020A For parallel circuit, need spool
1IMDA
RPHT/IM 5EL1183057A-H For parallel circuit with upper
arrangement for xed setting port
valves
RPH5/IM 5EL1183250A-H For parallel circuit with oating
circuit with upper arrangement for
xed setting port valves
RPHSP/IM 5EL1183059A-H For tandem circuit with upper
arrangement for xed setting port
valves
RSP5/IM 5EL3183250-H For tandem circuit with oating
circuit with upper arrangement for
xed setting port valves
RQHT/IM 5EL1183061-H For parallel circuit without upper
arrangement for port valves
RPH5LL/IM 5EL1183065A-H For parallel circuit with arrangement
for load leak valve need spool type
5HFLLIM and control type
13IMOPHCR
2a Spools page 34
TYPE CODE DESCRIPTION
1IM 3CU2510420 Double acting with A and B closed in
neutral position
1IMDA 3CU2510490 As type 1IM with descent control and
load check valve without power supply
on port A: need working section
PHD/IM and control type 8IMD
1AIM 3CU2522420 Double acting with A open to tank in
neutral position
1BIM 3CU2522420 Double acting with B open to tank in
neutral position
2H 3CU2525425 Double acting with A and B partially
connect to tank in neutral position
2IM 3CU2525420 Double acting with A and B connect to
tank in neutral position
3IM 3CU2535420 Single acting on A, B plugged
4IM 3CU2535420 Single acting on B; A plugged
5IMP 3CU2542430 Double acting spool with A and B
closed in neutral position, spool out
oating 4
th
position: need working
section P5/IMP and control type
13 IMP
1IM(8IMSP) 3CU2510491 As type 1IM: need control type
8IMSPSL4P
2b Spools page 34
TYPE CODE DESCRIPTION
5HFLLIM 3CU2541210-H As 5IMP need working section
RPH5LL and control type
13IMOPHCR
3 Complete controls * page 47
Proportional Hydraulic control
TYPE CODE DESCRIPTION
8IM 5IDR216300 Zama control kit. Range 5.8-19 bar
(84-270 psi)
8IMD 5IDR218300 Zama control kit. Range 5.8-19 bar
(84-270 psi): working section for
PHD/IM and spool type 1IMDA
8IMF3 5IDR216303 Zama control kit with screws spool
stroke adjusting. Range 5.8-19 bar
(84-270 psi)
8IMSPSL 5IDR218012 Zama control kit with spool position
sensor esecution. Range 0.8-4.2 bar
(11-60 psi): need spool type
1IM(8IMSP)
8IMOH 5IDR216000-H Steel control kit. Range 5.8-19 bar
(84-270 psi)
13IMP 5IDR216014 Control kit for oating circuit.
Range 5.8-14 bar
(84-270 psi): need
working section P5/IMP and spool
type 5IMP
13IMOPHCR 5IDR216015-H Control kit for oating circuit.
Range 3.5-18 bar
(51-261 psi): need
working section RPH5LL/IM and
spool type 5HFLLIM
4a Port valves page 51
See page 28.
4b Port valves page 56
See page 29.
4c Low leak valve page 56
TYPE CODE DESCRIPTION
LL 5KIT918002 Low leak valve
5 Port plugs *
CODE DESCRIPTION
3XTAP732200 G3/4 Plug
NOTE (*) – Codes are referred to BSP thread.
________________________________________
Parts ordering codes (proportional hydraulic control)
5
D1WWEB01E
32
SDS180
Working section
P type
A B
SP type
A B
A B
PES type
series line
tank line
Dimensional data and hydraulic circuit
____________________________________________________________
P type
(Dimensions are the same for P5/SP/PES/PHT/PHD type)
175
6.89
111.5
4.39
36.5
1.44
2
0.08
48
1.89
84
3.31
45.5
1.79
A B
Valve xing
plan
A B
48
1.89
A B
80
3.15
47.5
1.87
RPHT type
(Dimensions are the same for RPH5/RPHSP/RSP5/RQHT type)
175
6.89
111.5
4.39
36.5
1.44
A B
Valve xing
plan
2
0.08
48
1.89
80
3.15
47.5
1.87
A B
RQHT type
RPH type
A B
RQHT type
A B
A B
RPHSP type
D1WWEB01E
33
SDS180
Working section
_____________________________________________________________
Dimensional data and hydraulic circuit
RPH5LL type
A B
RPH5LL type
125
4.92
2
0.08
194
7.64
46.5
1.83
A
B
36.5
1.44
76
2.99
48
1.89
84
3.31
45.5
1.79
84
3.31
48
1.89
38.5
1.52
13.5
0.53
127
5.00
S type
A B
A B
Valve
xing plan
S type
A B
series line
tank line
111.5
4.39
Valve xing
plan
A B
D1WWEB01E
34
SDS180
Working section
Spools
________________________________________________________________________________________________________
Type 1 spool metering
Q
in
= 160 l/min / (42 US gpm)
P
(on ports)
= 100 bar / (1450 psi)
Type 1 (1D/1CS/1[11A]/1IM) spool
Double acting, 3 positions, with A and B
closed in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
0
50
100
150
200
Flow
(l/min)
0
10
20
30
40
50
(US gpm)
0
0.05 0.10 0.15 0.20
(in)
0.25
0 1 2 3 4 5 6 7
Stroke (mm)
P=>A=>B=>T
201
A B
P T
2
0
1
A B
P T
A B
P T
2
0
1
A B
P T
201
201
B
P T
Type 1A (1AIM) spool
Double acting, 3 positions, with A open
to tank in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Type 1B (1BIM) spool
Double acting, 3 positions, with B open
to tank in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Type 2 (2IM) spool
Double acting, 3 positions, with A and B
open to tank in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Type 2H spool
Double acting, 3 positions, with A and B
partially open to tank in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Type 3 (3IM) spool
Single acting on A, 3 positions, B
plugged; requires G3/4 plug
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Type 4 (4IM) spool
Single acting on B, 3 positions,
plugged; requires G3/4 plug
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
201
A
P T
201
A B
P T
3
Type 5B spool
Double acting spool with A and B closed
in neutral position, 4 positions, with spo-
ol out, oating 4
th
position (pos.3)
Spool stroke
position 1: + 6 mm (+ 0.24 in)
position 2: - 6 mm (- 0.24 in)
position 3: + 12 mm (+ 0.47 in)
2
0
1
A B
P T
201
A B
P T
1
1D
1CS
1IM
1(11A)
D1WWEB01E
35
SDS180
Working section
2
0
1
A B
P T
201
A B
P T
Type 8PF spool
Double acting, 3 positions,
regenerative circuit in 3
rd
position
(pos. 2) with spool in
Spool stroke
position 1: + 5.7 mm (+ 0.22 in)
position 2: - 5.7 mm (- 0.22 in)
Type 8PFG spool
Double acting, 3 positions, regenerative
circuit in 2
nd
position (pos.1)
with spool out
Spool stroke
position 1: + 5.7 mm (+ 0.22 in)
position 2: - 5.7 mm (- 0.22 in)
Type 1CSG (1CSGH) spool
Double acting with A and B closed in neutral
position, B partially connect to tank in pos. 1,
A partially connect to tank in pos. 2
Type 1TX (1TYD) spool
Double acting with A and B closed in neutral
position with restricted connection to tank
0
40
80
120
160
Flow
(l/min)
0
10
20
30
40
(US gpm)
0
0.05 0.10 0.15 0.20
(in)
0 1 2 3 4 5 6
Stroke (mm)
Spool metering
Q
in
= 160 l/min / (42 US gpm)
P
(on ports)
= 100 bar / (1450 psi)
P=>A=>B=>T
________________________________________________________________________________________________________
Spools
Type 5 (5IMP) and 5HFLL spool
Double acting spool with A and B closed
in neutral position, 4 positions, with spo-
ol in, oating 4
th
position (pos.3)
Type 5 (5IMP) Spool stroke
position 1: + 6 mm (+ 0.24 in)
position 2: - 6 mm (- 0.24 in)
position 3: - 12 mm (- 0.47 in)
2
0
1
A B
P T
3
0
50
100
150
200
Flow
(l/min)
0
10
20
30
40
50
(US gpm)
0
0.05 0.10 0.15 0.20
(in)
0.25
0 1 2 3 4 5 6 7
Stroke (mm)
Type 5 spool pressure drop in
position 3
0
Pressure
(bar)
0
10
20
30
5
(psi)
0
2 4 6
(US gpm)
0 10 20 30 40 50
Flow (l/min)
1
2
3
4
8
10 12
Type 5 spool metering
Q
in
= 160 l/min / (42 US gpm)
P
(on ports)
= 100 bar / (1450 psi)
P=>A=>B=>T
40
50
60
70
B=>T
A=>T
Type 1IMDA spool
Double acting with A and B
closed in neutral position,
descent control and load
check valve without
power supply on port A
201
A B
P T
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
Pressure drop
0
10
20
40
50
Pressure
(bar)
0
100
200
300
400
500
(psi)
0
10 20 30
(US gpm)
40
0 40 80
120
Flow (l/min)
B=>A
160
P=>A
600
700
30
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
2
0
1
A B
P T
2
0
1
A B
P T
1CSG
1CSGH
1TX
1TYD
Type 5HFLL Spool stroke
position 1: + 6.5 mm (+ 0.25 in)
position 2: - 6.5 mm (- 0.25 in)
position 3: - 12.5 mm (- 0.49 in)
D1WWEB01E
36
SDS180
Working section
“A” side spool positioners
_____________________________________________________________________________
With spring return
8 type
It’s supplied with standard spring D type (see force-stroke diagram) and available with lighter spring C type (8MC code:
5V08210000).
8TL type
As 8 type, for exible cable control.
8F2 type
With spool stroke adjustment in position 2 (P ⇒ B).
51
2.05
56
2.20
62
2.44
18
0.71
Ø10
Ø0.39
43
1.69
10
0.39
51
2.05
63
2.48
72.5
2.85
32
1.25
32
1.25
M6
Stroke (mm)
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
(lbf)
0
-30
-60
30
60
(in)
0 0.1 0.2-0.1-0.2
Force
(N)
300
200
-100
-300
0
100
-200
Features
Detent and release force .......: 280 N (63 lbf) ±10%
51
2.05
11 type
12 type
15 type
16 type
With detent
M8
D
D
C
C
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y
V
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 13 - 24 Nm (17.7 lbft)
Z = allen wrench 4
X
X = wrench 5 - 9.8 Nm
(7.23 lbft)
D1WWEB01E
37
SDS180
Working section
______________________________________________________________________________
“A” side spool positioners
With detent and spring return to neutral position from either directions
Detent area
Detent area
Position 1 - Detent force: 130 N (29.2 lbf) ± 10% / Release force: 215 N (48.3 lbf) ± 10%
Position 2 - Detent force: 145 N (32.6 lbf) ± 10% / Release force: 300 N (67.4 lbf) ± 10%
Detent force-stroke
Stroke (mm)
Force
(N)
(in)
(lbf)
400
2
0 1
Port B Port A
200
-200
-400
0
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
0 0.1 0.2-0.1-0.2
0
-40
-80
40
80
82.5
3.24
(-0.18)
-4.5
(0.18)
9BZ type
detent in position 1 (curve A)
10BZ type
detent in position 2 (curve B)
11BZ type
detent in position 1 and 2 (curves A and B)
Solenoid lock device 8K type
With spring return and spool electromechanical lock in neutral position; when coil is feeded the spool can be moved. it’s possible to
obtain further congurations with several “A” side spool positioners: contact Sales Dept.
111.3
4.38
45
1.77
84.3
3.32
B
A
4.5
Features
For coil BE and mating
connectors see page 76
9BZ kit
11BZ kit
10BZ kit
X
manual
tightening
X
X = wrench 4 - 6.6 Nm (4.87 lbft)
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 24 - 24 Nm (17.7 lbft)
Y
D1WWEB01E
38
SDS180
Working section
“A” side spool positioners
_____________________________________________________________________________
With microswitch
8MG3 type
With spring return in neutral position and microswitch operated in both directions. Also available 8MG1 (microswitch operated
in position 1) and 8MG2 (microswitch operated in position 2) congurations; dimension are the same of 8MG3 conguration.
Needs dedicated working section kit 5EL1183000C, 5EL216300E or 5EL3183001A (without spool seals).
Electromagnetic detent 8RMN2 type
137
5.39
150
3.93
Features
Nominal voltage ................... : 12-24 VDC (± 10%)
Power rating ........................ : 5 W
Resitance ............................ : 26-29.8 Ω - 12VDC
102-118 Ω - 24VDC
Duty cycle ........................... : 100%
Connector ........................... : AMP JPT 2P
Unlocking force (12 VDC) ...... : 380N (85.4 lbf)
Mating connector cod. W0251001 not included
Features
MICROSWITCH
Mechanical life ..................... : 5x10
5
operations
Electrical life (resistive load) .. : 10
5
oper. – 7A / 13.5VDC
.......................................... : 5x10
4
oper. – 10A / 12VDC
.......................................... : 5x10
4
oper. – 3A / 28VDC
Connector ........................... : Packard Weather-pack
Mating connector cod. 5CON001 not included
111
4.37
45.5
1.79
148.5
5.84
Complete controls
Circuit
Microswitch operation
position 1
8MG1
position 2
8MG2
positions 1, 2
8MG3
(NO) 5V08110060 5V08110070 5V08110050
(NC) / / 5V08110053
8MG3(NO)
8MG19/MG29(NC/NC)
Features
MICROSWITCH
Mechanical life ..................... : 5X10
5
operations
Electrical life (resistive load) .. : 10
5
oper. – 7A / 13.5VDC
.......................................... : 5x10
4
oper. – 10A / 12VDC
.......................................... : 5x10
4
oper. – 3A / 28VDC
Connector ........................... : Packard Weather-pack
Mating connector cod. 5CON140047 not included
141
5.55
47.5
1.87
75.5
2.97
A B
8MG19/MG29 type
With double microswitch in position 1 and 2. Needs dedicated working section kit 5EL1183000C, 5EL216300E or 5EL3183001A
(without spool seals).
Positions A B
1 •
• • •
0 •
• • •
2 •
• • •
X
Y
Y
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 22 - 24 Nm (17.7 lbft)
X
X
X
X = wrench 5 - 9.8 Nm
(7.23 lbft)
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 22 - 24 Nm (17.7 lbft)
D1WWEB01E
39
SDS180
Working section
______________________________________________________________________________
“A” side spool positioners
ON/OFF pneumatic kit 8PG type
With spring return to neutral position. Needs dedicated working section kit 5EL1183000C, 5EL216300E or 5EL3183001A
(without spool seals).
53
2.09
58.5
2.30
123
4.84
Features
Pilot pressure ....................... : min. 6 bar (87 psi)
.......................................... : max. 12 bar (174 psi)
VB
VA
NPT 1/8” n.2 threads
VA
VB
ON/OFF electro-pneumatic kit 8EPG3 type
Needs dedicated working section kit 5EL1183000C, 5EL216300E or 5EL3183001A (without spool seals).
58
2.28
104.5
4.11
33.5
1.34
53
2.09
Ø 6
Ø 0.24
Features
Pilot pressure ....................... : min. 6 bar (85 psi)
.......................................... : max. 15 bar (215 psi)
For coil BPV see page 78
VA VB
123
4.84
138
5.43
VB
VA
Pg09
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
Y
X = wrench 5 - 9.8 Nm
(7.23 lbft)
Y = wrench 13 - 1.5 Nm (1.11 lbft)
W = wrench 15 - 6.6 Nm (4.87 lbft)
W
D1WWEB01E
40
SDS180
Working section
“A” side spool positioners
_____________________________________________________________________________
ON/OFF pneumatic waterproof kit 8PDG type
Needs dedicated working section kit (without spool seals).
113
4.45
53
2.09
60
2.36
VA
VB
ON/OFF electro-pneumatic waterproof kit 8EPDG3 type
Needs dedicated working section kit (without spool seals).
118.6
4.67
46.7
1.84
30.5
1.20
71.5
2.81
123
4.84
127
5
Ø 6
Ø 0.24
VBVA
VB
VA
VBVA
Features
Pilot pressure ....................... : min. 6.5 bar (90 psi)
.......................................... : max. 15 bar (200 psi))
For coil BPV see page 78
Features
Pilot pressure ....................... : min. 6.5 bar (90 psi)
.......................................... : max. 15 bar (200 psi)
NPT 1/8” n.2 threads
Pg09
38
1.50
30.5
1.20
11
0.43
X
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 13 - 1.5 Nm (1.11 lbft)
W = wrench 15 - 6.6 Nm (4.87 lbft)
Y
W
D1WWEB01E
41
SDS180
Working section
______________________________________________________________________________
“A” side spool positioners
ON/OFF electro-hydraulic control 8EI3
Features
Pilot pressure ....................... : min. 10 bar (145 psi)
.......................................... : max. 50 bar (725 psi)
Max backpressure on drain L .. : 25 bar (360 psi)
For coil BT and mating connectors see page 78
L
V
43
1.69
130.9
5.15
127
5.00
84
3.30
Collector kit for external pilot and drain
Description example:
SDS180/3/AC(XG-210)R2E/18EI3LCZ/18EI3LCZ/
18EI3LCZ.UX3(G-230)/RC-KE3S0–12VDC
Collector
V L
P
L (G1/4)
upper port
T
149
5.87
COLLECTOR KIT CODES
Type Code * Description
KE1S0 5KE1S00030 Kit for one section
KE2S0 5KE2S01530 Kit for 2 sections
KE3S0 5KE3S01530 Kit for 3 sections
KE4S0 5KE4S01530 Kit for 4 sections
KE5S0 5KE5S01530 Kit for 5 sections
KE6S0 5KE6S01530 Kit for 6 sections
KE7S0 5KE7S01530 Kit for 7 sections
(*) codes are referred to BSP thread
V (G1/4)
lower port
X = wrench 6 - 24 Nm (17.7 lbft)
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 21 - 6.6 Nm (4.87 lbft)
W = wrench 24 - 9.8 Nm (7.23 lbft)
X
W
Y
X
X
D1WWEB01E
42
SDS180
Working section
“A” side spool positioners
_____________________________________________________________________________
ON/OFF electro-hydraulic kit 8EI3 type
Collector kit for internal pilot and drain
The kit include collecctor, VRP pressure reducing valve and pipes.
Description example:
SDS180/2/AC(YG3–120)/1CS8EI3L/1CS8EI3L/
RV–KE2R3–24VDC
Features
VRP VALVE
Output pressure. . . . . . . . . . . . . . : 20 bar (290 psi)
Max ow . . . . . . . . . . . . . . . . . . . : 8 l/min (2.1 US gpm)
Filtering . . . . . . . . . . . . . . . . . . . : 80 μm
Outlet cover type RV
(see page 54).
With backpressure
valve (not included in
the collector kit) and
carry-over.
Collector
Drain line
Inlet line
P
T
VRE backpressure valve
Valve assembled on ow through passage to provide pilot pressure to the actuator.
It’s available as VRE (code X076700010) for inlet ow lower 80 l/min (21.13 US gpm) or VRE(6) (code X076710006) for inlet
ow upper 80 l/min (21.13 US gpm): see diagram.
Pressure drop P
→ C
0
0
20 40 60 80 100 120 140
5
10
15
20
Flow (l/min)
Pressure
(bar)
0
8 16 24 32
(US gpm)
0
50
100
150
200
250
(psi)
56
2.20
106
4.17
G 3/4
C
C
T
VRE
VRE(6)
150
5.90
283.5
11.16
40
160
COLLECTOR KIT CODES
Type Code * Description
KE1R3 5KE1R31530 Kit for one section
KE2R3 5KE2R31530 Kit for 2 sections
KE3R3 5KE3R31530 Kit for 3 sections
KE4R3 5KE4R31530 Kit for 4 sections
KE5R3 5KE5R31530 Kit for 5 sections
KE6R3 5KE6R31530 Kit for 6 sections
KE7R3 5KE7R31530 Kit for 7 sections
(*) codes are referred to BSP thread
X = wrench 6 - 24 Nm (17.7 lbft)
X
X = wrench 36 - 42 Nm (31 lbft)
X
D1WWEB01E
43
SDS180
Working section
______________________________________________________________________________
“A” side spool positioners
Particular positioner kits for special spools
11A
With detent in position 1 and 2, and automatic release in neutral position.
Features
Release pressure . . . . . . . . . . . . . : from 20 to 180 bar
. . . . . . . . . . . . . . (from 290 to 2600 psi)
. . . . . . . . . . . . .
83
3.27
13MD
Detent in 4
th
position with spring return in neutral position
with detent spool in type.
13C
Detent in 4
th
position with spring return in neutral position
with detent spool out type.
83
3.27
Dedicated parts Type Code
Spool 1(11A) 3CU2510321
Working section kit P 5EL1183000C
Dedicated parts Type Code
Spool 5 3CU2541200
Working section kit left inlet P5 5EL1183201
Working section kit right inlet P5ED 5EL1183260
Dedicated parts Type Code
Spool 5B 3CU2541203-H
Working section kit left inlet P5ED 5EL1183260
Working section kit right inlet P5 5EL1183201
TP
BA
85
3.35
Y
W
V
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 10- 9.8 Nm (7.23 lbft)
V = wrench 24 - 9.8 Nm (7.23 lbft)
W = allen wrench 3
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
D1WWEB01E
44
SDS180
Working section
LF1 type
With spool stroke adjustment in position 12 (P→A).
It can be roated 180° (conguration LF1180).
LB type
Steel construction, with pivot placed down.
Assembling with 5B and 5BY type spool is not possible.
76.5
3.01
67.5
2.66
77.5
3.05
36
1.42
M10
46
1.81
37
1.46
24
0.94
conguration L180
41.50
1.63
26.5
1.04
3
2
1
0
29°
16°
16°
Vertical handlever
assembly
Horizontal handlever
assembly
M8
“B” side options
___________________________________________________________________________________________
Lever control
L type
Alluminium lever pivot box with protective rubber bellow; it can be roated 180° (conguration L180).
65.5
2.58
36
1.42
Valve xing
plan
39.5
1.55
83
3.27
70.5
2.77
2
1
0
2
1
0
LB1 LB3LB1 LB3
17°
17°
17°
17°
Y
W
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
X
X
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 13 - 24 Nm (17.7 lbft)
W = allen wrench 4
X = wrench 5 - 9.8 Nm
(7.23 lbft)
D1WWEB01E
45
SDS180
Working section
___________________________________________________________________________________________
“B” side options
LCB and LCE mechanical joysticks for two sections control
NOTE – The handlever must be ordered separately (see page 28).
Dimensions and movement scheme for left inlet directional valve
40
1.57
37
1.46
Execution LCB1
pivot placed down on the left
spool axis
pivot
pivot
pivot
pivot
Execution LCB2
pivot placed down on the right
Execution LCB3
pivot placed above to the left
Execution LCB4
pivot placed above to the right
B2A2
B1
A1
B1-A2
B1
B2
A2
A1
A2-B1
B1-B2
A1-B2A1-A2
A2-A1
A1-A2
B2-B1 B2-A1
A2
B2
A1
B1
B2A2
A1
B1
A1-B2
A2-A1
B1-B2
B1-A2
A2-B1
B2-B1 B2-A1
97.5
3.83
M12
Max. working angles
Horizontal
axis
Vertical
axis
Single action operation 18°30’ 15°30’
Single action operation
with oating
not
available
not
available
Two section operation 18°30’ 15°30’
Two section operation
with oating
not
available
not
available
85.5
3.37
60.5
2.38
Handlever AL08
B1
A1
A2
B2
X = wrench 6 - 24 Nm (17.7 lbft)
X
D1WWEB01E
46
SDS180
Working section
“B” side options
___________________________________________________________________________________________
NOTE – For more information about remote cable control, require appropriate documentation.
105
4.13
13
0.51
48
1.89
SL type SLP type
Mechanical control with dust-proof plate kit.
21.5
0.85
32
1.26
CD exible
cables
SCF031
remote control
TQ kit
SDS180 directional
control valve
59
2.32
CD exible cable
TQ cable remote control kit
Prearranged for remote control with exible cable.
Ø 10
Ø 0.39
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = allen wrench 24
Y
D1WWEB01E
47
SDS180
Working section
0
0
2 4
6 8
(mm)
(bar)
10
20
30
40
(psi)
0
100
200
300
400
500
(in)
0 0.05 0.200.10 0.15
0.25 0.30
Pusher stroke
Pilot pressure
19 bar (275 psi)
7.6 mm (0.30 in)
0.85 mm
(0.033 in)
7.25 mm
(0.29 in)
5.8 bar
(84 psi)
Stroke
Pressure
(bar)
(in)
(psi)
20
2
0 1
Port B Port A
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
0 0.1 0.2-0.1-0.2
0
50
100
150
200
10
15
0
5
250
(mm)
spool
dead band
________________________________________________________________________________________
Complete controls
Proportional hydraulic controls
Needs dedicated spool and working section kit without spool seals. (See page 31).
8IMF3 type
Zama control kit, conguration with screws for spool stroke
adjustment.
Pressure control curve on
port VA and VB: type 033
8IM type
Zama control kit.
Features
Pilot pressure . . . . . . . . . . . . . : max. 100 bar (1450 psi)
Pressure - stroke diagram
(for controls represented)
69
2.71
G 1/4
313
12.32
69
2.71
53.5
2.11
53.5
2.11
24
0.94
8IMOH type
Steel control kit.
VA
VB
Diagrams and features of proportional hydraulic controls
X
69
2.72
24
53
2.09
313
12.32
G 1/4
VA
VB
53
2.09
X
23.5
0.92
342
13.46
83.5
3.29
53
2.09
53
2.09
Y
W
M8
VA
G 1/4
VB
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = allen wrench 4
W = wrench 13 - 24 Nm
(17.7 lbft)
8IM type features
Adjustment range . . . . . . : from 5.8 to 19 bar
(from 84.1 to 275 psi)
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
8IMF3 type and 8IMOH type features
Adjustment range . . . . . . : Da 5 a 20 bar
(from 72.5 to 290 psi)
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
NOTE – these drawings are not to scale with the others
included in the catalog
D1WWEB01E
48
SDS180
Working section
Control features
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
Connector . . . . . . . . . . . . : Deutsch DT04-4P
Mating connector cod. 5CON140072 not included
Complete controls
________________________________________________________________________________________
Proportional hydraulic control
8IMSPSL proportional hydraulic kit
With spool position sensor.
23.5
0.92
68
2.68
120.5
4.74
52.5
2.07
363.5
14.31
G 1/4
SPSL
cod: YSE227021D02
Connector PIN-OUT
Pin
Functions
for 5V supply for 8-32V supply
1 +5V signal OUT
2 N.C. GND
3 GND Vb+
4 signal Out not connected
Output Voltage-spool stroke diagram
53
2.09
53
2.09
Spool position sensor features
Voltage supply range . . . . : from 9 to 32 VDC or 5 VDC
Current absorption . . . . . . : <10 mA
Mechanical life . . . . . . . . . : 3x10
6
Connector type . . . . . . . . : Deutsch DT04-4P
Weather protection. . . . . . : IP 67 - IP 69K
Working temperature . . . . : -40/+105 °C
Minimum load resistance. . : 10 KΩ
Working pressure max.. . . : 350 bar • 5100 psi
Max. mechanical stroke . . : ±10 mm
Max. electrical stroke.. . . . : ±10mm
Output signal
Range. . . . . . . . . . . . . : from 0.5 to 4.5 V
Linearity . . . . . . . . . . . : ± 5%
Spool in neutral . . . . . . : 2.5 ± 0.2 V
Max current. . . . . . . . . : 1 mA
Mechanical vibrations,
shock, bumps . . . . . . . . . : IEC 68-2-6,27,29
EMC compatibility. . . . . . . : ISO 13766 - ISO 15982
NOTE – these drawings are not to scale with the others included in the catalog
(mm)
-4-5-6-7 -3 3-2 2-1 10 4 5 6 7
(V)
1
0
2
3
4
5
Spool stroke
(in)
-0.05 0.05-0.10 0.10-0.15 0.15-0.20 0.20-0.25 0.250
Output signal
operation tolerance
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 17 - 9.8 Nm (7.23 lbft)
W = wrench 4 - 9.8 Nm (7.23 lbft)
1
23
4
VA
VB
W
Y
X
D1WWEB01E
49
SDS180
Working section
Stroke (mm)
Pressure
(bar)
(in)
(psi)
20
2
0 1
Port B Port A
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
0 0.1 0.2-0.1-0.2
0
50
100
150
200
10
15
0
5
250
Pressure - stroke diagram
(0.10)
2.50
-1.40
(-0.05)
1IMDA spool
dead band
________________________________________________________________________________________
Complete controls
Proportional hydraulic control
8IMD proportional hydraulic kit
For descent control valve on A.
23.5
0.92
53
2.09
75
2.95
319
12.56
G 1/4
69
2.72
59
2.32
VA
VB
0
0
2 4
6 8
(mm)
(bar)
10
20
30
40
(psi)
0
100
200
300
400
500
(in)
0 0.05 0.200.10 0.15
0.25 0.30
Pusher stroke
Pilot pressure
19 bar (275 psi)
7.6 mm (0.30 in)
0.85 mm
(0.033 in)
7.25 mm
(0.29 in)
5.8 bar
(84 psi)
Pressure control curve on
port VA and VB: type 033
Features
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
Dedicated parts Type Code
Spool 1MDA 3CU2510490
Working section kit PHD/IM 5EL1183020A
NOTE – these drawings are not to scale with the others included in the catalog
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
D1WWEB01E
50
SDS180
Working section
Complete controls
________________________________________________________________________________________
Proportional hydraulic control
13IMP and 13IMOPHCR proportional hydraulic kit
For oating circuit.
Stroke (mm)
Pressure
(bar)
(in)
(psi)
20
-2 0 2 4 6-4-6-8-10-12
0 0.1 0.2-0.1
-0.2
0
100
200
300
400
10
15
0
5
25
30
35
3
2
0
1
-0.3-0.4
Port A
Port B
Float
Pressure - stroke diagram
Metering zone with spool type 5IMP
Spool dead band
(0.16)
-4.15
-6.50
(0.26)
Pressure control curve on
port VA and VB: type 075
0
0
2 4 6 8 (mm)
(bar)
10
20
30
40
Pusher stroke
Pilot pressure
16.2 bar (235 psi)
7.6 mm (0.30 in)
1 mm
(0.033 in)
7.25 mm
(0.29 in)
5 bar
(73 psi)
(psi)
0
100
200
300
400
500
(in)
0 0.05 0.200.10 0.15
0.25 0.30
23.5
0.92
53
2.09
75
2.95
319
12.56
G 1/4
69
2.72
59
2.32
VA
VB
NOTE – these drawings are not to scale with the others included in the catalog
0.26
-12.50 6.50
(0.26)(0.49)
VA
VB
23.5
0.92
53.5
2.11
75
2.95
319
12.56
G 1/4
69
2.72
59.5
2.34
13IMP
13IMOPHCR
Features
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
Dedicated parts
13 IMP
Type Code
Spool 5IMP 3CU2542430
Working section kit P5/IMP 5EL1183205A
Dedicated parts
13IMOPHCR
Type Code
Spool 5HFLLIM 3CU2541210-H
Working section kit RPH5LL/IM 5EL1183065A-H
X = wrench 5 - 9.8 Nm
(7.23 lbft)
X
X
D1WWEB01E
51
SDS180
Working section
__________________________________________________________________________________________________
Port valves
Antishock valves
P 1 (G 3 - 100)
Spring type
Valve setting (bar)
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
Conguration
T
P
A B
A B
A B
T
P
Conguration type G:
with screw
Conguration type H:
valve set and locked
18.5
0.73
Notch 1.5 mm (0.06 lbft)
G3 setting range
G2 setting range
G4 setting range
From 160 to 315 bar (from 2300 to 4600 psi)
From 50 to 120 bar (from 725 to 1750 psi)
From 100 to 250 bar (from 1450 to 3600 psi)
0
100
200
300
400
0
40
80
120
160
0
1000
2000
3000
4000
5000
0
10 20 30 40
Flow (l/min)
Pressure
(US gpm)
(psi)
(bar)
max. setting
min. setting
standard setting
min. setting
max. setting
standard setting
400
0
10 20 30 40
(US gpm)
(bar)
0
100
200
300
Pressure
0
1000
2000
3000
4000
5000
(psi)
0
40
80
120
160
Flow (l/min)
min. setting
max. setting
standard setting
400
0
10 20 30 40
(US gpm)
(bar)
0
100
200
300
Pressure
0
1000
2000
3000
4000
5000
(psi)
0
40
80
120
160
Flow (l/min)
X
Y
X = wrench 30 - 42 Nm
(31 lbft)
Y = wrench 27 - 24 Nm (17.7 lbft)
D1WWEB01E
52
SDS180
Working section
Port valves
_________________________________________________________________________________________________
Antishock and anticavitation valves
U 1 (G 3 - 100)
Spring type
Valve setting (bar)
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
Conguration
T
P
A B
A B
A B
T
P
U U U
Conguration type G:
with screw
Conguration type H:
valve set and locked
Conguration type Z:
with tamper proof
cap
20.5
0.81
cap, code:
3COP129200
G2 setting range
G3 setting range
G4 setting range
0
100
200
300
400
0
40
80
120
160
0
1000
2000
3000
4000
5000
0
10 20 30 40
Flow (l/min)
Pressure
(US gpm)
(psi)
(bar)
0
100
200
300
400
0
40
80
120
160
0
1000
2000
3000
4000
5000
0
10 20 30 40
Flow (l/min)
Pressure
(US gpm)
(psi)
(bar)
0
100
200
300
400
0
40
80
120
160
0
1000
2000
3000
4000
5000
0
10 20 30 40
Flow (l/min)
Pressure
(US gpm)
(psi)
(bar)
max. setting
max. setting
min. setting
min. setting
min. setting
max. setting
Pressure drop P ⇒ T
standard setting
standard setting
standard setting
From 180 to 350 bar (from 2600 to 5100 psi)
From 35 to 90 bar (from 510 to 1300 psi) From 100 to 250 bar (from 1450 to 3600 psi)
0
50
0
40
80
120
160
0
2000
0
10 30 40
Flow (l/min)
Pressure
(US gpm)
(psi)
(bar)
100
150
200
20
1500
1000
500
2500
Notch 1.5 mm
(0.06 lbft)
X
Y
X = wrench 30 - 42 Nm
(31 lbft)
Y = wrench 27 - 24 Nm (17.7 lbft)
D1WWEB01E
53
SDS180
Working section
UXW 1 (G - 160)
Pressure
setting (bar)
Conguration
31
1.22
Flow (l/min)
Pressure
(bar)
40 120
1000
0
80 160
0
100
200
300
400
0
2000
3000
4000
5000
0
10 20 30 40
(US gpm)
(psi)
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
T
P
A B
A B
A B
T
P
) (
) (
) (
) (
Conguration type G:
with screw
Conguration type H:
valve set and locked
W
Range setting
Pressure
(bar)
100
0
10
20
30
40
(psi)
200
300
500
0
400
Flow (l/min)
120800 40
160
Pressure drop
(US gpm)
302010
0
40
UXW 1 UXW 2 UXW 3
min. setting
max. setting
__________________________________________________________________________________________________
Port valves
Pilot operated anti-shock and anticavitation valves
standard setting
From 63 to 315 bar (from 900 to 4600 psi)
X
Y
X = wrench 27 - 42 Nm
(31 lbft)
Y = wrench 17 - 24 Nm (17.7 lbft)
W = allen wrench 5
D1WWEB01E
54
SDS180
Working section
PX1
PX2 PX3
T
P
A B
A B
X
) (
X
) (
T
P
A B
X
) (
X
) (
PX 1
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
Port valves
_________________________________________________________________________________________________
Pilot hydraulic unloader valve
0
4
8
16
20
0
20 40
60 80
100
120
0
50
100
150
200
250
0
10 20 30
Flow
Pressure
(US gpm)
(psi)
(bar)
12
Pressure drop P ⇒ T
(l/min)
G 1/4
NOTE – For safety reasons the valve is supplied with blanking plug
28.7
1.13
X
Y
X = wrench 30 - 42 Nm
(31 lbft)
Y = wrench 6 - 24 Nm (17.7 lbft)
D1WWEB01E
55
SDS180
Working section
Valve blanking plug
C 1
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
T
P
A B
A B
A B
T
P
C C C
0
0
10
20
40
30
50
30 60 90 120 150 180 210
20
100
30 40 50
0
100
200
300
400
500
600
700
Flow (l/min)
Pressure
(bar)
Pressure drop
(psi)
(US gpm)
T
P
A B
A B
A B
T
P
10
0.39
__________________________________________________________________________________________________
Port valves
Anticavitation valve
Mounted
on port A
Mounted
on port B
Mounted
on ports A and B
X
X = wrench 30 - 42 Nm
(31 lbft)
X
X = wrench 12 - 42 Nm
(31 lbft)
D1WWEB01E
56
SDS180
Working section
Port valves
_________________________________________________________________________________________________
Low leak valve
For RPH5LL working port.
Fixed setting antishock and anticavitation valves
For RPH5LL, RPHT, RPH5, RPHSP, RSP5 working port.
5
0
10
15
20
(bar)
(psi)
50
0
100
150
200
250
(US gpm)
(l/min)
0 10 20
30
40 50 60
30 6
9
12
15
Flow
Pressure
Pressure drop
(in anticavitation)
Type U
Flow
Pressure
Setting example
(10 l/min - 2.6 Us gpm)
0 10 20
30
40 50 60
(l/min)
(psi)
(US gpm)
30 6
9
12
15
100
0
200
300
400
500
(bar)
1500
0
3000
4500
6000
25 bar (360 psi)
80 bar (1150 psi)
140 bar (2050 psi)
210 bar (3050 psi)
260 bar (3750 psi)
300 bar (4350 psi)
U 1 (100)
Valve setting (bar)
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
U U U
T
P
T
P
A B
A B
A B
T
P
A B
LL
Features
Oil leakage . . . . . . . . . . . : 3-4 cm
3
/min (0.18-0.24 in
3
/min)
With mineral oil of 46mm2/s (46 cSt) viscosity at 40°C
(104°F) temperature
130
5.12
X
Valve xing
plan
2
0.08
X = wrench 8 - 24 Nm (17.7 lbft)
114.3
4.5
X
Valve xing
plan
2
0.08
X = wrench 13 - 24 Nm (17.7 lbft)
D1WWEB01E
57
SDS180
Working section
__________________________________________________________________________________________________
Port valves
Anticavitation valve
For RPH5LL, RPHT, RPH5, RPHSP, RSP5 working port.
C 1
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
T
P
A B
A B
A B
T
P
C C C
5
0
10
15
20
(bar)
(psi)
50
0
100
150
200
250
(US gpm)
(l/min)
0 10 20
30
40 50 60
30 6
9
12
15
Flow
Pressure
Pressure drop
(in anticavitation)
Type C
Valve blanking plug
UT 3
T
P
A B
A B
A B
T
P
1 mounted on port A
2 mounted on port B
3 mounted on ports A and B
UT1 UT2 UT3
114.3
4.5
Valve xing
plan
2
0.08
X
X = wrench 13 - 24 Nm
(17.7 lbft)
111.3
4.38
Valve xing
plan
2
0.08
X
X = wrench 13 - 24 Nm
(17.7 lbft)
D1WWEB01E
58
SDS180
Intermediate section
CS1 mid return manifold
_______________________________________________________________________________
Mid return manifolds for directional valve with left and right inlet both; they allow 2 independent circuits with common outlet.
G1
B1 B2
A1 A2
P1
P2
T
Hydraulic circuit
A1 B1 B2 A2
P2P1
T
102
4.01
Description example:
SDS180/2/AC(YG3-175)/18L/CS1/ 18L/BC(YG3-175)
2540
175
2540
175
48
0.94
24
0.94
50
1.97
D1WWEB01E
59
SDS180
Intermediate section
________________________________________________________________________________
CS3 mid return manifold
Mid return manifolds for directional valves SDS180 with left inlet section and SDS150 with right inlet section; they allow 2
indipendent circuits with common outlet.
G1
58
2.28
B1 B2
A1
SDS180
A2
P1
P2
Hydraulic circuit
A1 B1 B2 A2
P2P1
T
108
4.25
Description example:
SDS180/1/AC(YG3-175)/18L/CS3/18L/BC(YG3-175)/SDS150/1
T
SDS150
29
1.14
50
1.97
2540
175
2540
175
D1WWEB01E
60
SDS180
Intermediate section
P
A2
B2
Service relief valve section
____________________________________________________________________________
EI conguration
The operation of up stream section exclude the EI downstream section.
The pressure of the downstream sections should be adjusted at least 20 bar below the relief valve setting.
Execution EI2, without plug, is prearranged for a second inlet.
Previous section
Following section
Inlet cover with
ow cut-out
Following section
NOTE – EIM intermediate section must be always assembled with inlet cover with ow cut-out. (See page 20).
48
1.89
92
3.62
EIM conguration
1750
120
36
1.42
EI1
Previous section
Following section
1750
120
EI2
P1
P1
G 3/4
P1
Inlet cover with ow cut-out
Following section
1750
120
48
1.89
24
0.94
Following section
A1
B1
A2
B2
96
3.78
36
1.42
conguration EI1
P1
G 3/4
P1
24
0.94
7.9
0.31
7.9
0.31
D1WWEB01E
61
SDS180
Outlet section
FS SDS180 / RC
_____________________________________________________________________________________
Parts ordering codes
_____________________________________________________________
Dimensional data and hydraulic circuit
T
RC
T
C
T
Section C-C
DIN906-M18x1.5
tapered plug
T
C
RE
RD
T
Section C-C
DIN906-M18x1.5
tapered plug
T
C
T
RK
RV
169
6.65
100
3.94
34.5
1.36
105
4.13
C
C
M10
17
0.67
31.5
1.24
12
0.47
14
0.55
50
1.97
5.5
0.22
1
1
2
2
1 Complete outlet cover
TYPE CODE DESCRIPTION
RC 618301003 With side outlet
RD 618301002 With upper outlet
RE 618301001 With upper outlet and side carry-over
sleeve
RK 618301004 With upper outlet and closed center
RV 618301009 With backpressure valve
2 Circuit options
TYPE CODE QTY DESCRIPTION
- 4TAP318010 1 M18x1.5 tapered plug for
carry-over (RE), carry-over with
backpressure valve (RV) and closed
centre (RK) options
VRE(6) X076710006 1 Backpressure valve 6 bar
(87 psi)
for RV conguration
VRE X076700010 1 Backpressure valve 10 bar
(145 psi)
for RV conguration
- 3XTAP740210 1 G1 plug
X = wrench 12 - 42 Nm
(31 lbft)
Y = wrench 8 - 42 Nm (31 lbft)
X
Y Y
D1WWEB01E
62
DLS180
Working conditions
______________________________________________________________________________________
This catalogue shows technical specications and diagrams measured with mineral oil of 46mm
2
/s - 46 cSt viscosity at 40°C
- 104°F temperature.
Nominal ow rating
on inlet P 180 l/min
47 US gpm
on ports A and B 160 l/min
42 US gpm
Max pressure (
1
) 315 bar
4600 psi
Stadard stand by 14 bar
203 psi
Internal leakage (standard)
A(B)⇒T
∆p = 100 bar
(1450 psi)
5 cm
3
/min
0.30 in
3
/min
Fluid Mineral based oil
Fluid temperature
with NBR (BUNA-N) seals from -20°C to 80°C
from -4°F to 176°F
with FPM (VITON) seals from -20°C to 100°C
from -4°F to 212°F
Viscosity
operating range from 15 to 75 mm
2
/s
from 15 to 75 cSt
min. 12 mm
2
s
12 cSt
max. 400 mm
2
s
400 cSt
Max. contamination level -/19/16 - ISO 4406
NAS 1638 - class 10
Ambient temperature for wor-
king conditions
from -40°C to 60°C
from -40°F to 140°F
NOTE - (
1
) Intermittent pressure at max. 250,000 cycles with specic internal testing.
Standard threads
_________________________________________________________________________________________
REFERENCE STANDARD
BSP UN-UNF NPTF
THREAD ACCORDING TO
ISO 228/1 ISO 263 NSI B1.20.3
BS 2779 ANSI B1.1 unied
CAVITY DIMENSION
ACCORDING TO
ISO 1179-1 11926-1
SAE J1926-1 J476a
DIN 3852-2 shape X or Y
PORTS THREADING
MAIN BSP UN-UNF
Inlet P - Outlet T G 1 1 5/16-12 (SAE 16)
Ports A and B G 3/4 1 1/16-12 (SAE 12)
Load sensing LS G 1/4 9/16-18 (SAE 6)
PILOT
Hydraulic G 1/4 9/16-18 (SAE 6)
Valve general informations
D1WWEB01E
63
DLS180
Valve general informations
_________________________________________________________________________________________
Dimensional data
NOTE – Drawings and dimensions are referred to BSP thread conguration.
TYPE
E F Weight
mm
in
mm
in
Kg
lb
DLS180/1 177.8
7.00
124
4.88
13.8
30.42
DLS180/2 225.8
8.89
172
6.77
19.2
42.33
DLS180/3 273.8
10.78
220
8.66
24.6
54.23
DLS180/4 321.8
12.67
268
10.55
30
66.14
DLS180/5 369.8
14.56
316
12.44
35.4
78.04
DLS180/6 417.8
16.45
364
14.33
40.8
89.95
TYPE
E F Weight
mm
in
mm
in
Kg
lb
DLS180/7 465.8
18.34
412
16.22
46.2
101.85
DLS180/8 513.8
20.23
460
18.11
51.6
113.76
DLS180/9 561.8
22.12
508
20.00
57
125.66
DLS180/10 609.8
24.01
556
21.89
62.4
137.57
DLS180/11 657.8
25.90
604
23.78
67.8
149.47
DLS180/12 705.8
27.76
652
25.67
73.2
161.38
P ⇒ T pressure drop
inlet compensator
(margin pressure)
Flow
(l/min)
Pressure
(bar)
(psi)
(US gpm)
0 40 80 120 160
0
10
20
30
40
0
100
200
300
400
500
0 10 20 30 40
0 80 120 160
0
5
10
15
20
25
0
60
120
180
240
300
360
0 10 20 30 40
Flow
(l/min)
Pressure
(bar)
(psi)
(US gpm)
P ⇒ A10(B10)
P ⇒ A6(B6)
P ⇒ A1(B1)
0 40 80 120 160
0
5
10
15
20
0
50
100
150
200
250
0 10 20 30 40
Flow
(l/min)
Pressure
(bar)
A(B) ⇒ T pressure drop
(psi)
(US gpm)
A1(B1) ⇒ T
A6(B6) ⇒ T
A10(B10) ⇒ T
________________________________________________________________________________________
Performance data
P ⇒ A(B) pressure drop
(standard spool @ max. stroke)
LS
M10 assembling holes
E
113.5
4.47
F
116.8
319
4.60
12.56
175
6.89
3.94
3.62
0.31
100
92
8
1.48
37.5
50
1.97
94
3.70
48
1.89
62
2.44
62
2.44
14
0.55
12
0.47
15°
2
1
0
15°
T
A1 A2
B1 B2
P
50
1.97
50
1.97
2
0.08
D1WWEB01E
64
DLS180
Valve general informations
Hydraulic circuit
__________________________________________________________________________________________
Description example:
DLS180/2/AMD(G4–210)/6ZM8IMF3.U3(G3-170)/6ZM8IMF3/RF
For open center circuit (xed displacement pump)
For closed center circuit (variable displacement pump with Load-Sensing compensator)
Description example:
DLS180/2/AND(G3–120)/6ZLF3/6ZLF3/RF
LS
P
B1
B2
V2
V4
V1 V3
A1
A2
T
LS
P
B1
B2
T
A1
A2
D1WWEB01E
65
Valve general informations
DLS180
___________________________________________________________________
Complete sections ordering codes
1 2 3 4
DLS180 / 2 / AMD(G3-120) / 6ZLF3 / 6ZLF3 / RF - STAF
1
2
3
2
4
4
1 Inlet section * page 66
TYPE CODE DESCRIPTION
AMD(G3-120) 61F331000 For open centre circuit, with L.S.
pressure relief valve
AMDT(G3-120) 61F311002 As previous with upper outlet closed
AND(G3-120) 61F332000 For closed centre circuit, with L.S.
pressure relief valve
ANDT(G3-120) 61F312002 As previous with upper outlet closed
APD(SV) 61F333000 Without compensator and L.S.
pressure relief valve
APDT(SV) 61F313002 As previous with upper outlet closed
2 Working section * page 68
TYPE CODE DESCRIPTION
6Z8LF3 61F131601 Parallel circuit, lever control
6ZM8IMHF3 61F131602 Parallel circuit, proportional hydraulic
control with spool stroke limiter
3 Outlet section * page 74
TYPE CODE DESCRIPTION
RF 618301008 With ports plugged
RD 618301014 With upper outlet
RC 618301013 With side outlet
4 Fixing brackets page 79
TYPE CODE DESCRIPTION
STAF 5STA125220 Brackets with assembling screws
5 Assembling kit
CODE DESCRIPTION
5TIR110170 Tie rod kit for 1 working section directional valve
5TIR110218 Tie rod kit for 2 working sections directional valve
5TIR110266 Tie rod kit for 3 working sections directional valve
5TIR110316 Tie rod kit for 4 working sections directional valve
5TIR110368 Tie rod kit for 5 working sections directional valve
5TIR110410 Tie rod kit for 6 working sections directional valve
5TIR110458 Tie rod kit for 7 working sections directional valve
5TIR110506 Tie rod kit for 8 working sections directional valve
5TIR110554 Tie rod kit for 9 working sections directional valve
5TIR110602 Tie rod kit for 10 working sections directional valve
5TIR110650 Tie rod kit for 11 working sections directional valve
5TIR110698 Tie rod kit for 12 working sections directional valve
NOTE (*) – Codes are referred to BSP thread.
Nr. of working
sections
5
5
5
D1WWEB01E
66
Inlet section
DLS180
FE DLS180 / AM D T (G3 - 120)
Pressure relief valve setting (bar)
2
1 2
1 Inlet cover body * page 67
TYPE CODE DESCRIPTION
AM 5FIA318300 For xed displacement pump, L.S.
compensator (open centre) with main
relief valve arrangement
AN 5FIA318301 For variable displacement pump,
(closed centre) with main relief valve
arrangement
AP 5FIA318302 For variable displacement pump,
(closed centre) without main relief
valve predisposition
2 Inlet relief options page 21
Standard setting is referred to 10 l/min (2.6 US gpm) ow.
TYPE CODE DESCRIPTION
SV XTAP525320 Relief valve blanking plug
Load Sensing main relief valve
LSW(G2) 5KIT118110 Range 5-50 bar
(72-720 psi)
standard setting 30 bar (400 psi)
LSW(G3) 5KIT118111 Range 50-200 bar (720-3200 psi)
standard setting 150 bar (2150 psi)
LSW(G4) 5KIT118112 Range 180-315 bar (2600-4550 psi)
standard setting 250 bar (3600 psi)
3 Compensator kit
CODE DESCRIPTION
5KIT018300 Compensator kit, for AM section
5KIT018310 Compensator blanking kit, for AN and AP section
NOTE (*) – Codes are referred to BSP thread.
1
1
Parts ordering codes
____________________________________________________________________________________
3
3
3
Available congurations
D: With side inlet port closed
C: With upper inlet port closed
D1WWEB01E
67
Inlet section
DLS180
_____________________________________________________________
Dimensional data and hydraulic circuit
Description example:
AMD(G3–120)
Description example:
AND(G3–120)
Description example:
APD(SV)
For xed displacement
pump, L.S. compensator
(open centre)
with main relief valve
For variable displacement
pump, (closed centre)
with main relief valve
For variable displacement
pump, (closed centre)
without main relief valve
120
1750
LS
120
1750
LS LS
60
2.36
179
7.05
2
0.08
41
1.61
113.5
4.47
39.1
1.54
124
4.88
M10
38.5
1.52
P
P
100
3.94
50
1.97
50
1.97
24
0.94
5.5
0.22
34.5
1.36
T
T
P1 P1 P1
LSLSLS
T T T
Y
X
V
W
U
R
X = wrench 10 - 24 Nm (17.7 lbft)
Y = wrench 24 - 30 Nm (22.13 lbft)
W = wrench 6 - 24 Nm (17.7 lbft)
V = wrench 12 - 42 Nm (31 lbft)
U= allen wrench 4
R = allen wrench 13
S = wrench 12 - 42 Nm
(31 lbft)
S
D1WWEB01E
68
DLS180DLS180
Parts ordering codes (mechanical control)
_______________________________________________________
1 Working section kit * page 70
TYPE CODE DESCRIPTION
P 5EL5183000 Parallel circuit for hydraulic controls
2 Spools page 70
TYPE CODE DESCRIPTION
Double acting, 3 positions, with A and B closed in neutral
position.
6Q 3CU3610040 Up to 40 l/min
(10.57 US gpm) ow
6O 3CU3610080 Up to 80 l/min (21.13 US gpm) ow
6V 3CU3610120 Up to 120 l/min (31.70 US gpm) ow
6Z 3CU3610140 Up to 140 l/min (36.98 US gpm) ow
Double acting, 3 positions, with A and B to tank in neutral
position.
7V 3CU3625120 Up to 120 l/min
(31.70 US gpm) ow
7Z 3CU3625140 Up to 140 l/min (36.98 US gpm) ow
3 “A” side spool positioners page 71
TYPE CODE DESCRIPTION
7FT 5V07210100 With friction and notch for neutral
position sensor
8MC 5V08210000 With spring return in neutral
position
9BZ 5V09110030 With detent in position 1 and spring
return in neutral position
10BZ 5V10110030 With detent in position 2 and spring
return in neutral position
11BZ 5V11110030 Detent in positions 1 and 2 and
spring return in neutral position
8IZ 5V08110800 Proportional hydraulic control
4 “B” side options page 72
TYPE CODE DESCRIPTION
L 5LEV110110-H Standard lever box
LF3 5LEV110115-H Lever box with spool stroke limiter
LA 5LEV110125-H Steel lever kit
LAF3 5LEV110120-H Steel lever kit with spool stroke
limiter
SLP 5COP110000 Without lever box, with dust-proof plate
TQ 5TEL118100-H Flexible cable connection; for CD cables
5 Port valves page 51
Valves standard setting is referred to 10 l/min (2.64 USgpm) ow.
TYPE CODE DESCRIPTION
- XTAP530361 A and B ports valve blanking plugs,
(omitted in description)
C 3XCAR416100 Anti-cavitation valve
Anti-shock valve
P(G2) XCAR216115 Range 50-120 bar
(725-1750 psi)
standard setting 63 bar (900 psi)
P(G3) XCAR216116 Range 100-250 bar (1450-3600 psi)
standard setting 100 bar (1450 psi)
P(G4) XCAR216117 Range 160-315 bar (2300-4600 psi)
standard setting 200 bar (2900 psi)
Pilot hydraulic unloader valve
PX XCAR416301 Pilot hydraulic unloader valve
Anti-shock and anti-cavitation valve
U(G2) X011411099 Range 35-90 bar
(510 -1300 psi)
standard setting 60 bar (870 psi)
U(G3) X011411100 Range 100-250 bar (1450-3600 psi)
standard setting 100 bar (1800 psi)
U(G4) X011411101 Range 180-350 bar (2600-5100 psi)
standard setting 200 bar (2900 psi)
Pilot operated anti-shock and anti-cavitation valve
UXW(G) X01141B160 Range 63-315 bar
(900-4600 psi)
standard setting 160 bar (2300 psi)
NOTE (*) – Codes are referred to BSP thread.
EL DLS180 / 6Z 8 LF3 P1 (G3 - 100)
2 3 4
1
Working section
5
2
3
4
5
5
1
D1WWEB01E
69
DLS180
Working section
EL DLS180 / 6ZM 8IMF3 P1 (G3 - 100)
2 3
________________________________________
Parts ordering codes (proportional hydraulic control)
1 Working section kit * page 70
TYPE CODE DESCRIPTION
P/IM 5EL5183000A Parallel circuit for hydraulic controls
2 Spools page 70
TYPE CODE DESCRIPTION
Double acting, 3 positions, with A and B closed in neutral
position.
6QM 3CU3550040 Up to 40 l/min
(10.57 US gpm) ow
6OM 3CU3550080 Up to l/min (21.13 US gpm) ow
6VM 3CU3550120 Up to 120 l/min (31.70 US gpm) ow
6ZM 3CU3550140 Up to 140 l/min (36.98 US gpm) ow
Double acting, 3 positions, with A and B to tank in neutral
position.
7VM 3CU3555120 Up to 120 l/min
(31.70 US gpm) ow
7ZM 3CU3555140 Up to 140 l/min (36.98 UU gpm) ow
3 Complete controls page 73
Proportional Hydraulic control
TYPE CODE DESCRIPTION
8IM 5IDR216300 Zama control kit.
Range 5.8-19 bar
(84-270 psi)
8IMF3 5IDR216303 Zama control kit with stroke
limiters. Range 5.8-19 bar
(84-270 psi)
8IMO 5IDR216000 Steel control kit. Range 5.8-19 bar
(84-270 psi)
8IMOHF3 5IDR216303-H Steel control kit with stroke
limiters. Range 5.8-19 bar
(84-270 psi)
4 Port valves page 51
Valves standard setting is referred to 10 l/min (2.64 USgpm) ow.
TYPE CODE DESCRIPTION
- XTAP530361 A and B ports valve blanking plugs,
(omitted in description)
C 3XCAR416100 Anti-cavitation valve
Anti-shock valve
P(G2) XCAR216115 Range 50-120 bar
(725-1750 psi)
standard setting 63 bar (900 psi)
P(G3) XCAR216116 Range 100-250 bar (1450-3600 psi)
standard setting 100 bar (1450 psi)
P(G4) XCAR216117 Range 160-315 bar (2300-4600 psi)
standard setting 200 bar (2900 psi)
Pilot hydraulic unloader valve
PX XCAR416301 Pilot hydraulic unloader valve
Anti-shock and anti-cavitation valve
U(G2) X011411099 Range 35-90 bar
(510 -1300 psi)
standard setting 60 bar (870 psi)
U(G3) X011411100 Range 100-250 bar (1450-3600 psi)
standard setting 100 bar (1800 psi)
U(G4) X011411101 Range 180-350 bar (2600-5100 psi)
standard setting 200 bar (2900 psi)
Pilot operated anti-shock and anti-cavitation valve
UXW(G) X01141B160 Range 63-315 bar
(900-4600 psi)
standard setting 160 bar (2300 psi)
NOTE (*) – Codes are referred to BSP thread.
1
4
2
3
4
3
4
1
D1WWEB01E
70
DLS180
Working section
Description example:
6Z8LF3
175
6.89
111.50
4.39
A
Dimensional data and hydraulic circuit
____________________________________________________________
B
Spools
________________________________________________________________________________________________________
2
0.08
Valve xing
plan
Type 6Q/6O/6V/6Z spool
Double acting, 3 positions, with A and B
closed in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
36.5
1.44
48
1.89
84
3.31
45.5
1.79
A B
A B
Type 7V/7Z spool
Double acting, 3 positions, with A and B
to tank in neutral position
Spool stroke
position 1: + 7 mm (+ 0.28 in)
position 2: - 7 mm (- 0.28 in)
A B
P T
201
A B
P T
2
0
1
D1WWEB01E
71
DLS180
Working section
8IZ proportional hydraulic control
VA
VB
Stroke
Pressure
(bar)
(in)
(psi)
20
2
0 1
Port B Port A
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
0 0.1 0.2-0.1-0.2
0
50
100
150
200
10
15
0
5
250
Features
Pilot pressure . . . . . . . . . : max. 100 bar (1450 psi)
Pressure - stroke diagram
(mm)
111.5
4.39
104
4.09
43.5
1.71
G 1/4
M8
38
1.50
spool
dead band
______________________________________________________________________________
“A” side spool positioners
For “A” side spool positioners 9BZ, 10BZ and 11BZ see page 37
51
2.01
88
3.46
With friction 7FT type With 8MC type spring return
W
Z
X
Y
Z = wrench 24 - manual tightening
X = wrench 5 - 9.8 Nm
(7.23 lbft)
Y = wrench 15 - 42 Nm (31 lbft)
W = allen wrench 4
X = wrench 5 - 6.6 Nm
(4.87 lbft)
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
37
1.46
G 1/4
X
D1WWEB01E
72
Working section
DLS180
Ø 10
Ø 0.39
87
3.42
82
3.23
L type
Aluminium pivot box with protective rubber bellow.
LF3 type
With spool stroke adjustments in pos.1 and 2, (P→A), (P→B).
94
3.70
82
3.23
94
3.70
88.5
3.48
“B” side options
___________________________________________________________________________________________
Lever control
15°
2
1
0
15°
M10
94
3.70
98.5
3.88
94
3.70
82
3.23
LA type
Steel execution.
LAF3 type
Steel execution with spool stroke adjustmentsin pos.1 and 2,
(P→A), (P→B).
M10
15°
2
1
0
15°
SLP type
Mechanical control with dust-proof plate kit.
56
2.20
56
2.20
56
2.20
56
2.20
82
3.23
94
3.70
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
X
Z
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y = wrench 8 - 6.6 Nm (4.87 lbft)
Z = allen wrench 2.5
Y
Z
X
X
X = wrench 5 - 9.8 Nm (7.23 lbft)
Y
X = wrench 5 - 9.8 Nm
(7.23 lbft)
Y = wrench 8 - 6.6 Nm (4.87 lbft)
Z = allen wrench 2.5
Upper view
Ø 18
Ø 0.71
32
1.26
X = wrench 5 - 9.8 Nm (7.23 lbft)
67
2.64
56
2.20
X
13
0.51
D1WWEB01E
73
Working section
DLS180
Stroke (mm)
Pressure
(bar)
(in)
(psi)
20
2
0 1
Port B Port A
0
1 2 3 4 5 6 7-1-2-3-4-5-6-7
0 0.1 0.2-0.1-0.2
0
50
100
150
200
10
15
0
5
250
Pressure - stroke diagram
spool
dead band
Features
Pilot pressure . . . . . . . . . . . . . : max. 100 bar (1450 psi)
________________________________________________________________________________________
Complete controls
8IMOHF3 proportional hydraulic kit
0
0
2 4
6 8
(mm)
(bar)
10
20
30
40
(psi)
0
100
200
300
400
500
(in)
0 0.05 0.200.10 0.15
0.25 0.30
Pusher stroke
Pilot pressure
19 bar (275 psi)
7.6 mm (0.30 in)
0.85 mm
(0.033 in)
7.25 mm
(0.29 in)
5.8 bar
(84 psi)
Pressure control curve on
port VA and VB: type 033
____________________________________________________________________________________________
“B” side option
TQ cable remote contol kit
For remote control with exible cable.
NOTE – For more information about remote cable control, require appropriate documentation.
CD exible
cables
SCF031
remote control
TQ kit
DLS180
directional control
valve
X = wrench 5 - 9.8 Nm (7.23 lbft)
*
depends on stroke setting
G 1/4
Y
Z
83.5
3.29
312
12.28
53.5
2.11
53.5
2.11
83.5
3.29
24
0.94
12.5*
0.49
12.5*
0.49
X = wrench 5 - 9.8 Nm
(7.23 lbft)
Y = wrench 13 - 24 Nm (17.7 lbft)
Z = allen wrench 4
X
NOTE – For 8IM, 8IMF3 and 8IMO complete controls see page 47
115
4.53
CD exible cable
X
D1WWEB01E
74
Outlet section
DLS180
T
RF
Dimensional data and hydraulic circuit
____________________________________________________________
T
RD
RC
T1
With RD type
upper outlet
with RC type
side outlet
T
T1
12
0.47
169
6.65
100
3.94
34.5
1.36
105
4.13
M10
17
0.67
31.5
1.24
5.5
0.22
14
0.55
50
1.97
5.5
0.22
RF type
with ports plugged
T
T1
X
X
X = wrench 12 - 42 Nm (31 lbft)
D1WWEB01E
75
SDS180/DLS180
_________________________________________________________________________
Installation and maintenance
The SDS180 and DLS180 valves are assembled and tested as per the technical specication of this catalogue.
Before the nal installation on your equipment, follow the below re commendations:
- the valve can be assembled in any position; order to prevent working section deformation and spool sticking mount the
product on a at surface;
- In order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down
directly on the valve;
- prior to painting, ensure plastic port plugs are tightly in place.
NOTE – These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface nish.
The manufacturer shall be consulted.
Fitting tightening torque - Nm (lbft)
THREAD TYPE port P ports A, B port T Hydraulic
pilot
BSP G 3/4 G 3/4 G 1 G 1/4
With O-Ring seal 90 (66.4) 90 (66.4) 100 (73.7) 25 (18.4)
With copper washer 90 (66.4) 90 (66.4) 90 (66.4) 30 (22.1)
With steel and rubber washer 70 (51.6) 70 (51.6) 100 (73.7) 16 (11.8)
UN-UNF
1 5/16-12
(SAE 16)
1 1/16-12
(SAE 12)
1 5/16-12
(SAE 16)
9/16-18
(SAE 6)
With O-Ring seal 150 (110.6) 95 (70.1) 150 (110.6) 30 (22.1)
P
A1
A2
B2
B1
T
P
T
A1
A2
B2
B1
D1WWEB01E
76
SDS180/DLS180
Coils
_________________________________________________________________________________________________________
Types and ordering codes
Accessories
Coil type Voltage
Connectors
ISO4400 Deutsch DT AMP JPT
Packard
Weatherpack
Packard
Metri-pack
Flying leads
(without conn.)
BER
10 VDC 4SLE001000 - - - - -
12 VDC
4SLE001200
4SLE001217
(3)
4SLE001201
(5)
4SLE001209
(3-5)
4SLE001202
(6)
4SLE001216
(3-6)
4SLE001206
(2)
4SLE001203
(5)
4SLE001211
(3-5)
4SLE001210
(2)
4SLE001214
(2)
4SLE001207
24 VDC
4SLE002400
4SLE002408
(3)
4SLE302400
(1)
4SLE002401
(5)
4SLE002407
(3-5)
4SLE002402
(6)
4SLE002403
(5)
- - 4SLE002404
48 VDC
4SLE004800
4SLE304800
(1)
- - - - -
110VDC
4SLE011000
4SLE311000
(1)
- - - - -
220 VDC
4SLE022000
4SLE322000
(1)
- - - - -
BE
12 VDC 4SL1000120
4SL1000123
(6)
4SL1000140
(3-6)
4SL1000124
(2)
- - - 4SL1000122
24 VDC
4SL1000240
4SL1030240
(1)
4SL1002401
(6)
- - - -
110 VDC
4SL1011100
4SL1031100
(1)
- - - - -
220 VDC
4SL1022200
4SL1032200
(1)
- - - - -
BT
10 VDC 4SL3000100
12 VDC
4SL3000120
4SL3000126
(4)
4SL3000130
(6)
4SL3000134
(3-6)
4SL3000128
(2)
4SL3000122
(5)
4SL3001200
(3-5)
4SL3000124
(2)
4SL3000127
(2)
4SL300012C
24 VDC
4SL3000240
4SL3030240
(1)
4SL3000249
(6)
4SL300024C
(3-6)
4SL3000248
(5)
- - 4SL3000246
26 VDC 4SL3000260 - - - - -
48 VDC
4SL3000480
4SL3030480
(1)
- - - - -
110 VDC
4SL3001100
4SL3031100
(1)
- - - - -
220 VDC
4SL3002200
4SL3032200
(1)
- - - -
BPV
12 VDC 4SLA001200 - - - - -
24 VDC 4SLA002400 - - - - -
Mating connectors
(For connector with rectier
sse following table)
4CN1009995 5CON140031 5CON003 5CON001 5CON017 -
NOTES – (
1
) supply with AC and use only with rectier connector - (
2
) with ying leads - (
3
) with bidirectional diode - (
5
) with unidirectional diode
(
5
) integrated perpendicular type - (
6
) integrated parallel type
Voltage
ISO 4400 mating connector with rectier
BER type coil BT type coil BPV type coil BE type coil
24 VDC 4CN1010240 4CN3010240 - 4CN1010240
48 VDC 4CN1010480 4CN3010480 - 4CN1010480
110 VDC 4CN1011100 4CN3011100 - 4CN1011100
220 VDC 4CN1012200 4CN3012200 - 4CN1012200
D1WWEB01E
77
Accessories
SDS180/DLS180
__________________________________________________________________________________________________________
Coils
Dimensions and features
BER type
ISO4400 connector
47.5
1.87
38.5
1.52
59.5
2.34
36
1.42
23.5
0.93
DEUTSCH DT04 connector
(perpendicular type)
36
1.42
23.5
0.93
47.5
1.87
68
2.68
38.5
1.52
AMP JPT connector
36
1.42
23.5
0.93
38.5
1.52
47.5
1.87
60.5
2.38
DEUTSCH DT04 connector
(parallel type)
38.5
1.52
23.5
0.93
36
1.42
68.3
2.69
47.5
1.87
200
7.87
Flying leads with
DEUTSCH DT04 connector
150
5.91
Flying leads with PACKARD
METRI-PACK connector
150
5.91
Flying leads with PACKARD
WEATHER-PACK connector
38.5
1.52
23.5
0.93
36
1.42
47.5
1.87
300
11.81
Flying leads
300
11.81
600
23.62
37.5
1.48
38.6
1.52
30
1.18
20.5
0.81
Flying leads
Flying leads with
DEUTSCH DT04 connector
BE type
ISO4400 connector
37.5
1.48
38.6
1.52
54
2.12
30
1.18
20.5
0.81
DEUTSCH DT04 connector
66.9
2.63
38.6
1.52
30
1.18
37.5
1.48
20.5
0.81
Features
Nominal voltage tolerance : ±10%
Power rating . . . . . . . . . . : 19.2 W - 10/12/24/48/
110/220 VDC
: 19 W - 24/110/220 RAC
: 19.2 W - 48 RAC
Max. operating current . . : 1.9 A - 10 VDC
: 1.61 A - 12 VDC
: 0.80 A - 24 VDC
: 0.40 A - 48 VDC
: 0.17 A - 110 VDC
: 0.09 A - 220 VDC
: 0.89 A - 24 RAC
: 0.45 A - 48 RAC
: 0.19 A - 110 RAC
: 0.09 A - 220 RAC
Coil insulance . . . . . . . . .: Class H (180°C-
356°F)
Weather protection . . . . .: IP65 - ISO4400
: IP69K - Deutsch DT
: IP65 - AMP JPT
: IP67 - Weatherpack
: IP67 - Metri-pack
Insertion . . . . . . . . . . . . : 100%
Features
Nominal voltage tolerance : ±10%
Power rating . . . . . . . . . . : 18.7 W - 12 VDC
: 18.6 W - 24 VDC
: 17.3 W - 110 VDC
: 15.7 W - 220 VDC
: 18.3 W - 24 RAC
: 16 W - 110 RAC
: 16 W- 220 RAC
Max. operating current . . : 1.56 A - 12 VDC
: 0.77 A - 24 VDC
: 0.157 A - 110 VDC
: 0.08 A - 220 VDC
: 0.85 A - 24 RAC
: 0.16 A - 110 RAC
: 0.08 A - 220 RAC
Coil insulance . . . . . . . . .: Class F (155°C-
311°F)
Weather protection . . . . . : IP65 - ISO4400
: IP69K - Deutsch DT
Insertion . . . . . . . . . . . . : 100%
D1WWEB01E
78
Accessories
SDS180/DLS180
Coils
_________________________________________________________________________________________________________
Dimensions and features
BPV type
Features
Nominal voltage tolerance : ±10%
Power rating . . . . . . . . . . : 8 W - 12/24 VDC
Max. operating current . . : 0.67 A - 12 VDC
: 0.33 A - 24VDC
Coil Insulance . . . . . . . . . : Class H (180°C-
356°F)
Weather protection . . . . . : IP65 - ISO4400
Insertion . . . . . . . . . . . . : 100%
ISO4400 connector
29.5
1.16
200
13.79
22
0.87
39.5
1.56
28.5
1.12
11
0.43
Flying leads
29.5
1.16
22
0.87
32.5
1.28
28.5
1.12
11
0.43
BT type
ISO4400 connector
52.5
2.07
50
1.97
40.5
1.59
Ø 36.5
1.44
18.25
0.72
AMP JPT connector
Ø 36.5
1.44
50
1.97
53.25
2.10
18.25
0.72
40.5
1.59
40.5
1.59
L
50
1.97
Ø 36.5
1.44
18.25
0.72
Flying leads
170
6.69
215
8.46
145
5.71
Coil type
Dimension L
(mm)
(in)
12VDC 247
9.72
24VDC 307
12.09
DEUTSCH DT04 connector
Ø 37.5
Ø
1.48
50
1.97
62.5
2.46
19.5
0.77
42.5
1.67
Flying leads with
DEUTSCH DT04
connector
Flying leads with
PACKARD METRI-PACK
connector
Flying leads with
PACKARD WEATHER-PACK
connector
Features
Nominal voltage tolerance : ±10%
Power rating . . . . . . . . . . : 19 W - 10 VDC
: 21 W - 12/24/26 VDC
: 20.3 W - 48 VDC
: 17.3 W - 110 VDC
: 17.7 W - 220 VDC
: 19.9 W - 24 RAC
: 20.7 W - 48 RAC
: 20 W - 110 / 220 RAC
Max. operating current . . : 1.9 A - 10 VDC
: 1.77 A - 12 VDC
: 0.89 A - 24VDC
: 0.84 A - 26 VDC
: 0.43 A - 48 VDC
: 0.16 A - 110 VDC
: 0.08 A - 220 VDC
: 0.93 A - 24 RAC
: 0.47 A - 48 RAC
: 0.18 A - 110 RAC
: 0.09 A - 220 RAC
Coil insulance . . . . . . . . .: Class F (155°C-
311°F)
Weather protection . . . . . : IP65 - ISO4400
: IP69K - Deutsch DT
: IP65 - AMP JPT
: IP67 - Weatherpack
: IP67 - Metri-pack
Insertion . . . . . . . . . . . . : 100%
D1WWEB01E
79
SDS180/DLS180
Accessories
____________________________________________________________________________________________
Fixing brackets
They are available for SDS180/DLS180 directional valves and they are zinc plated steel, complete with mounting screws.
Ø 10.5
Ø 0.41
Nr. 2 holes
190
7.48
215
8.46
100
3.94
11
0.43
15
0.59
24
0.94
16
0.63
5
0.20
_____________________________________________________________________________________________________
Painting
SDS180 valve can be supplied with one coat of black paint (CVN conguration).
Description example: SDS180/2/AC(YG3-120)/18L/18L/RC-<CVN>
NOTES – For different colour consult Sales Department.
M10 x 4
Wrench 16
24 Nm -
17.7 lbft
WWW.WALVOIL.COM
8
th
edition June 2015
D1WWEB01E
