Page PT32
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 9 / 2020
PROPORTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
EB-P2A 2 WAY NORMALLY CLOSED, PROPORTIONAL FLOW CONTROL VALVE
DESCRIPTION
8 size, 3/4-16 thread, solenoid operated, 2 way normally closed poppet style, proportional ow control valve.
OPERATION
When de-energized the EB-P2A blocks ow from (1) to (2) and allows reverse ow from (2) to (1). When
energized, the valve allows ow from (1) to (2). Flow is proportional to current applied to the coil. A compensator
must be used to create a pressure compensated ow control function.
FEATURES
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
Flow Range See curves
Max System Pressure 3500 PSI (241 bar)
Leakage 0-10 drops / min @ 245 bar
Hysteresis ±3%
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -30°C / +100°C
Weight .72 lbs (.32 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 19 ft-lbs (25 Nm)
Coil Nut Torque Requirements 2-3 ft-lbs (3-4 Nm)
Cavity POWER 2W
Cavity Tools Kit
(form tool, reamer, tap) 40500005
Seal Kit 21191102
Current Supply Characteristics PWM (Pulse Width Modulation)
Rated Current Range 400-1400 mA
PWM or Super-Imposed
Dither Frequency 100 Hz
Coil Resistance (12 VDC) 7.2 Ohm ±5% at 68°F (20°C)
Pressure Drop
1 to 2 with valve completely open
Flow vs. Current at different Pressure Drop
Coil 12 VDC - hyd. - Oil 26 cSt (121 SSU) @ 40°C (104°F)
VALVE SPECIFICATIONS
COIL SPECIFICATIONS
Curves are attained without pressure
compensator. The valve can work with a
pressure drop up to 200 bar.
HYDRAULIC SYMBOL
PERFORMANCE
Pressure Drop (bar)
Pressure Drop (PSI)
Flow (l/min)
Current (Amps)
Flow (l/min)
Flow (GPM)
Flow (GPM)
Page PT33
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 9 / 2020
PROPORTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
DIMENSIONS
EB-P2A – – – –
NOTES: 1) Flows refer to a 14 bar Delta P
2) For other seals, consult factory
OPTIONS BODIES
Buna Standard C0 Up to 25 l/min Blank Without Body
Buna, Screw Type Override (Knob) CS Up to 25 l/min N 3/8” BSP Ports
Buna, Screw Type Override (Grad. Knob) CK Up to 25 l/min S #8 SAE Ports
VOLTAGE
12 12 VDC
24 24 VDC
“F” COIL TERMINATION
HC DIN 43650 (Hirschmann)
DI Deutsch-Integral DT04-2P
JT AMP Jr. Timer
(for bodies style and sizes see section “Accessories”)
ORDERING INFORMATION
Approximate Coil Weight: .47 lbs (.21 kg)