c
2019 Sun Hydraulics 1 of 2
MODEL
770224
24 VDC coil with ISO/DIN 43650, Form A connector with TVS Diode
TECHNICAL DATA
Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC)
Arc Suppression (TVS) Included
Power Consumption (cold) - at rated voltage 22 watts
Maximum Ambient Temperature 50 °C
Voltage/Frequency 24 VDC
Operating Voltage Range +/- 10% nominal
Duty Cycle Rating 100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Connector Environment Rating IP65/IP67
Solenoid Tube Diameter 19 mm
Coil Nut Torque 0,5 Nm
Model Weight 0.23 kg.
PROPORTIONAL PERFORMANCE DATA
Maximum Current 590 mA
Nominal Coil Resistance at 122ºF (50ºC) Stabilized 37.2 ±5% ohms
Nominal Coil Resistance at 68ºF (20ºC) Cold 26.2 ±5% ohms
DAAL DAALS DBAL DBALS DFCA DFCB DFDA DFDB DFEA DFEB
DFFA DFFB DLDA DLDAS DLDAZ DMDA DMDAS DMDAZ DNCA DNCAZ
DNDA DNDAS DNDC DNDY DNDYS DTCA DTCAZ DTDA DTDAS DWDA
FMDA FMDB FPCC FPCH FPFK FPHK HDDA PRDL PRDM PRDN
PRDP PSDL PSDP RBAN RBAP
snhy.com/
770224
USED WITH
c
2019 Sun Hydraulics 2 of 2
TECHNICAL FEATURES
Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power dissipation @ 75°C is 6.5 W
and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
Power cable with mating connector is required and is not included with product.
This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
IP rating is dependent on the coil connector and the mating connector used.
RoHS compliant. Restricted materials less than 0.1% total by weight.
The external steel shell is plated with clear zinc trivalent.