c
2025 Sun Hydraulics 1 of 2
MODEL
RVCARVCA
Ventable, pilot-operated, balanced piston relief valve
SERIESSERIES 1 / 1 / CAPACITY:CAPACITY: 60 L/min. / 60 L/min. / CAVITY:CAVITY: T-11A T-11A
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
Ventable, pilot-operated, balanced piston relief cartridges are normally closed pressure
regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve
starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent
port (port 3) that connects between the main piston and pilot stage to provide for remote
control by other pilot or 2-way valves. These valves are accurate, have low pressure rise vs.
flow, they are smooth and quiet, and are moderately fast.
TECHNICAL DATATECHNICAL DATA
Cavity T-11A
Series 1
Capacity 60 L/min.
Maximum Operating Pressure 350 bar
Factory Pressure Settings Established at 15 L/min.
Control Pilot Flow 0,11 - 0,16 L/min.
Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 bar
Response Time - Typical 10 ms
Adjustment - No. of CW Turns from Min. to Max. setting 5
Valve Hex Size 22,2 mm
Valve Installation Torque 41 - 47 Nm
Adjustment Screw Internal Hex Size 4 mm
Locknut Hex Size 15 mm
Locknut Torque 9 - 10 Nm
Seal kit - Cartridge Buna: 990011007
Seal kit - Cartridge EPDM: 990011014
Seal kit - Cartridge Polyurethane: 990011002
Seal kit - Cartridge Viton: 990011006
Model Weight 0.16 kg.
sunhydraulics.com/model/
RVCA
For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in
the panel.
NOTESNOTES
c
2025 Sun Hydraulics 2 of 2
(L)(L)CONTROLCONTROL
LL Standard Screw Adjustment
CC Tamper Resistant - Factory Set
KK Handknob
OO Handknob with Panel Mount
(A)(A)ADJUSTMENT RANGEADJUSTMENT RANGE
AA 100 - 3000 psi (7 - 210 bar),
1000 psi (70 bar) Standard
Setting
WW 150 - 4500 psi (10,5 - 315 bar),
1000 psi (70 bar) Standard
Setting
BB 50 - 1500 psi (3,5 - 105 bar),
1000 psi (70 bar) Standard
Setting
CC 150 - 6000 psi (10,5 - 420 bar),
1000 psi (70 bar) Standard
Setting
DD 25 - 800 psi (1,7 - 55 bar), 400
psi (28 bar) Standard Setting
EE 25 - 400 psi (1,7 - 28 bar), 200
psi (14 bar) Standard Setting
(N)(N)SEAL MATERIALSEAL MATERIAL
NN Buna-N
EE EPDM
VV Viton
MATERIAL/COATINGMATERIAL/COATING
Standard Material/Coating
/AP/AP Stainless Steel, Passivated
/LH/LH Mild Steel, Zinc-Nickel
TECHNICAL FEATURESTECHNICAL FEATURES
A remote pilot relief on port 3 (vent) will control the valve below its own setting.
Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider
spool leakage.
Main stage orifice is protected by a 150-micron stainless steel screen.
Not suitable for use in load holding applications due to spool leakage.
Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids,
greases and lubricants will damage the seals.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation
torque and/or cavity/cartridge machining variations.
PERFORMANCE CURVESPERFORMANCE CURVES
Model Code Example: RVCALANModel Code Example: RVCALANCONFIGURATION OPTIONSCONFIGURATION OPTIONS