c
2024 Sun Hydraulics 1 of 2
MODEL
DACC
2-way, 2-stage, solenoid-operated directional poppet valve
SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A
(M)CONTROL
M Manual Override
C Concealed Manual Override
(C)SPOOL CONFIGURATION
C Normally Closed
H Normally Open
(N)SEAL MATERIAL
N Buna-N
E EPDM
V Viton
COIL *
No coil
212 DIN 43650-Form A, 12 VDC
224 DIN 43650-Form A, 24 VDC
* Additional coil options are available
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reverse
free flow check. It is available in either a normally open or normally closed configuration. Due to its poppet style
construction, it has extremely low leakage.
TECHNICAL DATA
Cavity T-13A
Series 1
Capacity 60 L/min.
Maximum Operating Pressure 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 bar
Check Cracking Pressure 3,5 bar
Response Time - Typical 30 ms
Switching Frequency 15,000 max. cycles/hr
Solenoid Tube Diameter 14,2 mm
Valve Hex Size 22,2 mm
Valve Installation Torque 41 - 47 Nm
Seal kit - Cartridge Buna: 990310007
Seal kit - Cartridge EPDM: 990313014
Seal kit - Cartridge Viton: 990310006
Seal and nut kit - Coil Viton: 990760006
Model Weight 0.19 kg.
sunhydraulics.com/model/
DACC
NOTES
Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.
An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.
Model Code Example: DACCMCNCONFIGURATION OPTIONS
c
2024 Sun Hydraulics 2 of 2
TECHNICAL FEATURES
The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage
the seals.
Valves exhibit extremely low leakage rates; less than 10 drops/min. @ 5000 psi (0,7 cc/min @ 350 bar).
This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a
factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes
that will affect the function of the cartridge.
The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
machining variations.
PERFORMANCE CURVES