Page 1 |
AVENTICS
Silencers, series SI1
- M5 G 1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1
- Stainless steel
Working pressure min./max. 0 ... 12 bar
Ambient temperature min./max. -20 ... 150 °C
Medium Compressed air
Sound pressure level See table below
Weight See table below
Comment Flow characteristic curves can be found
under “Diagrams”.
Technical data
Part No. Compressed air
connection
Sound pressure level
Flow
Delivery unit Weight
Qn
R412010090 M5 85 dB 73 l/min 1 piece 0.003 kg
R412010081 G 1/8 90 dB 1312 l/min 1 piece 0.011 kg
R412010082 G 1/4 93 dB 1852 l/min 1 piece 0.021 kg
R412010083 G 3/8 101 dB 2678 l/min 1 piece 0.028 kg
R412010084 G 1/2 95 dB 5649 l/min 1 piece 0.048 kg
R412010085 G 3/4 110 dB 5945 l/min 1 piece 0.076 kg
R412010086 G 1 100 dB 7206 l/min 1 piece 0.099 kg
Weight per piece
Nominal flowQn at p1 = 6 bar (absolute) freely discharged. Sound pressure level measured at 6 bar against atmosphereat 1 m
distance.
Technical information
Material
Silencer Stainless steel
Thread Stainless steel
Page 2 |
AVENTICS
Dimensions
Dimensions
Dimensions
Part No. Port G SW Ø D L1 L2
R412010090 M5 8 3.1 10.5 3.5
R412010081 G 1/8 13 6.6 20 6
R412010082 G 1/4 16 8.6 29.5 7.5
R412010083 G 3/8 19 12.1 33.5 7.5
R412010084 G 1/2 24 15.3 39.5 9.5
R412010085 G 3/4 30 19.3 45 10
R412010086 G 1 36 25.5 49.5 11.5
PDF creation date: 21.12.2020
Page 3 |
AVENTICS
Diagrams
Flow diagram, R412010090
PDF creation date: 21.12.2020
Page 4 |
AVENTICS
Diagrams
Flow diagram, R412010081
PDF creation date: 21.12.2020
Page 5 |
AVENTICS
Diagrams
Flow diagram, R412010082
PDF creation date: 21.12.2020
Page 6 |
AVENTICS
Diagrams
Flow diagram, R412010083
PDF creation date: 21.12.2020
Page 7 |
AVENTICS
Diagrams
Flow diagram, R412010084
PDF creation date: 21.12.2020
Page 8 |
AVENTICS
Diagrams
Flow diagram, R412010085
PDF creation date: 21.12.2020
Page 9 |
AVENTICS
Diagrams
Flow diagram, R412010086
PDF creation date: 21.12.2020
Efficient pneumatic solutions, our program:
cylinders and drives, valves and valve systems,
air supply management
Visit us: Emerson.com/Aventics
Your local contact: Emerson.com/contactus
Emerson.com
Facebook.com/EmersonAutomationSolutions
LinkedIn.com/company/Emerson-Automation-Solutions
Twitter.com/EMR_Automation
An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This
Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be
reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product
documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When
integrating the product into applications, note the system manufacturer's specifications for safe use of the product. The data specified only serve to
describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.
The information given does not release the user from the obligation of own judgement and verification. It must be remembered that the products are
subject to a natural process of wear and aging.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one
of the Emerson family of companies. All other marks are the property of their respective owners. © 2020 Emerson Electric Co.
All rights reserved.
2020-12