Design Series 47
Variable Displacement
AXIAL PISTON PUMPS
SERIES PVPLUS
2
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Offer of Sale
Please contact your Parker representation for a detailed ”Oer of Sale”.
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized
distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the
system and components and assuring that all performance, endurance, maintenance, safety and warning
requirements of the application are met. The user must analyze all aspects of the application, follow applicable
industry standards, and follow the information concerning the product in the current product catalog and in
any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options
based upon data or specifications provided by the user, the user is responsible for determining that such
data and specifications are suitable and sucient for all applications and reasonably foreseeable uses of the
components or systems.
WARNING – USER RESPONSIBILITY
Table of Contents
If you have questions about the
products contained in this catalog,
or their applications, please contact:
Parker Hannifin EMEA Sàrl European
Headquarters
parker.com/msge
3
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Introduction and general Information ................................................. 4
Technical Data ................................................................................. 5
Ordering Code ................................................................................. 6
Pressure Controls ............................................................................18
Remote Pressure Controls ...............................................................20
Load Sensing Controls ....................................................................22
Horse Power/Torque Controls ..........................................................26
Performance Curves .......................................................................30
Electronic P/Q Controls ...................................................................32
Eciency and Case Drain Flows .......................................................34
Accessories Control ........................................................................40
Proportional pressure relief valve PVACRE* .......................................42
Proportional pressure relief valve with OBE PVACRE*T ........................44
Electronic Module PQDXXA ..............................................................46
Electronic Module PQDXXA-PROFINET-Z10 ......................................47
PVplus Condition Monitoring ............................................................48
Pump Dimensions ...........................................................................50
Control Dimensions .........................................................................63
Through Drive – Mounting Kits .........................................................67
Through Drive – Flange Load Limitation .............................................68
Through Drive – Shaft Load Limitations .............................................69
4
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
INTRODUCTION
Technical Features
• Low noise level
• Fast response
• Service-friendly
• High self-priming speed
• Compact design
• Through drive for 100 % nominal torque
With through drive for single and
multiple pumps
Swash plate type for open circuit
General Information
Fluid recommendations
Premium quality hydraulic mineral fluid is recom-
mended, like HLP oils to DIN 51524 (part 2 & 3) or
ISO6743/4 (HM & HV). Brugger-value recommended to be
30 N/mm
2
minimum for general application and 50 N/
mm
2
for heavily loaded hydraulic equipment and fast
cycling machines and/or high dynamic loads, measured
in accordance with DIN 51 347-2. See also Document
MSG30-3248/UK Parker Hydraulic Fluids.
Viscosity
The normal operating viscosity should range between
16 and 100 mm
2
/s (cSt). Max. start-up viscosity is
1000 mm
2
/s (cSt).
Filtration
For maximum pump and system component functionality
and life, the system should be protected from contami-
nation by eective filtration.
Fluid cleanliness should be in accordance with ISO clas-
sification ISO 4406:1999. The quality of filter elements
should be in accordance with ISO standards.
General hydraulic systems for satisfactory operation:
Class 20/18/15, according to ISO 4406:1999
Recommended cleanliness for maximum component
life and functionality: Class 18/16/13, according to
ISO 4406:1999
Seals
Check hydraulic fluid specification for chemical resistance
of seal material.
Check temperature range of seal material and compare
with max. system and ambient temperature.
N – Nitrile (FKM shaft seal) -25…+ 90 °C
V – FKM (FKM shaft seal) -25…+115 °C
W – Nitrile (PTFE shaft seal) -30…+ 90 °C
Note: The highest fluid temperature will be at the drain
port of the pump, up to 25 °C higher than in the
reservoir.
5
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
TECHNICAL DATA
1)
Check adjustment range each compensator.
P V 016 PV020 PV023 PV028 PV032 PV040 PV046
Frame size 1 1 1 1 2 2 2
Max. displacement [cm
3
/rev.] 16 20 23 28 32 40 46
Output flow at 1500 rpm [l/min]
24 30 34,5 42 48 60 69
Nominal pressure pN [bar] 350 350 350 350 350 350 350
Min. outlet pressure [bar] 15 15 15 15 15 15 15
Max. pressure pmax at
20 % working cycle
1)
[bar] 420 420 420 420 420 420 420
Case drain pressure, continuous [bar] 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Case drain pressure, max. peak [bar] 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Min. inlet pressure, abs. [bar] 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Max. inlet pressure [bar] 16 16 16 16 16 16 16
Input power at 1500 rpm and 350 bar [kW]
15.9 19.7 22.4 26.9 31.1 38.5 43.8
Max. input torque at 350 bar [Nm] 94.5 118.1 135.9 165.4 184.3 230.4 265.0
Max speed at 1 bar, abs, inlet pressure [rpm] 3000 3000 3000 3000 2800 2800 2800
Min. speed [rpm]
50 50 50 50 50 50 50
Moment of inertia [kgm
2
] 0.0016 0.0016 0.0016 0.0016 0.0047 0.0047 0.0047
Weight
[kg] 19
19 19 19 30 30 30
PV063 PV080 PV092 PV140 PV180 PV270 PV360
Frame size 3 3 3 4 4 5 6
Max. displacement [cm
3
/rev.] 63 80 92 140 180 270 360
Output flow at 1500 rpm [l/min] 94.5 120 138 210 270 405 540
Nominal pressure pN [bar] 350 350 350 350 350 350 350
Min. outlet pressure [bar] 15 15 15 15 15 15 15
Max. pressure pmax at
20 % working cycle
1)
[bar] 420 420 420 420 420 420 420
Case drain pressure, continuous [bar] 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Case drain pressure, max. peak [bar] 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Min. inlet pressure, abs. [bar] 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Max. inlet pressure [bar] 16 16 16 16 16 16 16
Input power at 1500 rpm and 350 bar [kW] 61.3 76.9 87.5 136.1 173.1 259.6 338.7
Max. input torque at 350 bar [Nm] 365.2 463.7 533.3 812.4 1044.5 1550.5 2067.4
Max speed at 1 bar, abs, inlet pressure [rpm] 2800 2500 2300 2400 2200 1800 1750
Min. speed [rpm] 50 50 50 50 50 50 50
Moment of inertia [kgm
2
] 0.018 0.018 0.018 0.030 0.030 0.098 0.103
Weight [kg] 59 59 59 90 90 172 180
6
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
ORDERING CODE FRAME SIZE 1
4)
Drain and flushing ports
5)
All mounting and connecting threads
6)
Mounting interface, code K and L only
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
size and
displacement
rotation
seals
Code Displacement Size
016 16 cm³/rev 1
020 20 cm³/rev 1
023 23 cm³/rev 1
028 28 cm³/rev 1
Code Coupling for through drive as single part
7)
1 Single pump, no coupling
H with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG1K01
Y with coupling SAE A 9T-16/32 DP MK-PVBG1K11
A with coupling SAE 11T-16/32 DP MK-PVBG1K12
B with coupling SAE B 13T-16/32 DP MK-PVBG1K13
C with coupling SAE B-B 15T-16/32 DP MK-PVBG1K14
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
7)
A SAE A-2, Ø 82.55 mm MK-PVBG1Axx
B SAE B-4, Ø 101.6 mm MK-PVBG1Bxx
J metric, Ø 100 mm MK-PVBG1Jxx
See dimensions for details
7)
to be ordered separately as single part
see page 65.
Code Seals Shaft seal
N NBR FKM
V FKM FKM
W NBR PTFE
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
8
6)
ISO 6149 metric
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø100 mm
Cylindric,
key
L 4-hole flange
Ø100 mm
Splined,
DIN 5480
D SAE
ISO
3019/1
4-hole flange SAE B Cylindric, key
E 4-hole flange SAE B-B Splined, SAE
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
through
drive
code
7
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
Horse power / Torque control
Code
Nominal HP at 1.500 rpm Nominal torque
B 3 kW 20 Nm
C 4 kW 25 Nm
D 5.5 kW 35 Nm
E 7.5 kW 50 Nm
G 11 kW 71 Nm
H 15 kW 97 Nm
K 18.5 kW 120 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open NG6 interface
K pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M pilot operated pressure control, pressure sensor and
proportional pilot valve type PVACRE...K35 mounted for
pressure control and/or power control
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
ORDERING CODE FRAME SIZE 1
8
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
4)
Drain and flushing ports
5)
All mounting and connecting threads
6)
Mounting interface, code K and L only
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
8
6)
ISO 6149 metric
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
7)
A SAE A-2, Ø 82.55 mm MK-PVBG2Axx
B SAE B-2/4, Ø 101.6 mm MK-PVBG2Bxx
C SAE C-4, Ø 127 mm MK-PVBG2Cxx
J metric, Ø 100 mm MK-PVBG2Jxx
K metric, Ø 125 mm MK-PVBG2Kxx
See dimensions for details
7)
to be ordered separately as single part
see page 65.
Code Seals Shaft seal
N NBR FKM
V FKM FKM
W NBR PTFE
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
through
drive
code
size and
displacement
rotation
seals
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø125 mm
Cylindric,
key
L 4-hole flange
Ø125 mm
Splined,
DIN 5480
D SAE
ISO
3019/1
4-hole flange SAE C Cylindric, key
E 4-hole flange SAE C Splined, SAE
Code
Coupling for through drive as single part
7)
1
Single pump, no coupling
H with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG2K01
J with coupling 32 x 1.5 x 20, DIN 5480 MK-PVBG2K02
Y with coupling SAE A 9T-16/32 DP MK-PVBG2K11
A with coupling SAE 11T-16/32 DP MK-PVBG2K12
B with coupling SAE B 13T-16/32 DP MK-PVBG2K13
C with coupling SAE B-B 15T-16/32 DP MK-PVBG2K14
D with coupling SAE C 14T-12/24 DP MK-PVBG2K15
Code Displacement Size
032 32 cm³/rev 2
040 40 cm³/rev 2
046 46 cm³/rev 2
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
ORDERING CODE FRAME SIZE 2
9
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Horse power / Torque control
Code
Nominal HPat 1.500 rpm Nominal torque
D 5.5 kW 35 Nm
E 7.5 kW 50 Nm
G 11 kW 71 Nm
H 15 kW 97 Nm
K 18.5 kW 120 Nm
M 22 kW 142 Nm
S 30 kW 195 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open NG6 interface
K pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M pilot operated pressure control, pressure sensor and
proportional pilot valve type PVACRE...K35 mounted for
pressure control and/or power control
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
ORDERING CODE FRAME SIZE 2
10
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
4)
Drain and flushing ports
5)
All mounting and connecting threads
6)
For PV063-PV092 only: pressure port 1 1/4"
with 4 x M14 instead of 4 x M12
7)
for mounting interface K and L only
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
4
6)
BSPP metr. M14
8
7)
ISO 6149 metric
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
8)
A SAE A-2, Ø 82.55 mm MK-PVBG3Axx
B SAE B-2/4, Ø 101.6 mm MK-PVBG3Bxx
C SAE C-2/4, Ø 127 mm MK-PVBG3Cxx
D SAE D-4, Ø 152.4 mm MK-PVBG3Dxx
J metric, Ø 100 mm MK-PVBG3Jxx
K metric, Ø 125 mm MK-PVBG3Kxx
L metric, Ø 160 mm MK-PVBG3Lxx
See dimensions for details
8)
to be ordered separately as single part
see page 65.
Code Seals Shaft seal
N NBR FKM
V FKM FKM
W NBR PTFE
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
through
drive
code
size and
displacement
rotation
seals
Code Displacement Size
063 63 cm³/rev 3
080 80 cm³/rev 3
092 92 cm³/rev 3
Code
Coupling for through drive as single part
8)
1
Single pump, no coupling
H
with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG3K01
J
with coupling 32 x 1.5 x 20, DIN 5480 MK-PVBG3K02
K
with coupling 40 x 1.5 x 25, DIN 5480 MK-PVBG3K03
Y
with coupling SAE A 9T-16/32 DP MK-PVBG3K11
A
with coupling SAE 11T-16/32 DP MK-PVBG3K12
B
with coupling SAE B 13T-16/32 DP MK-PVBG3K13
C
with coupling SAE B-B 15T-16/32 DP MK-PVBG3K14
D
with coupling SAE C 14T-12/24 DP MK-PVBG3K15
E with coupling SAE C-C 17T-12/24 DP MK-PVBG3K16
F with coupling SAE D, E 13T-8/16 DP MK-PVBG3K17
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø160 mm
Cylindric,
key
L 4-hole flange
Ø160 mm
Splined,
DIN 5480
D SAE
ISO
3019/1
4-hole flange SAE D Cylindric, key
E 4-hole flange SAE D Splined, SAE
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
ORDERING CODE FRAME SIZE 3
11
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Horse power / Torque control
Code
Nominal HP
at 1.500 rpm
Nominal
torque
G 11 kW 71 Nm
H 15 kW 97 Nm
K 18.5 kW 120 Nm
M 22 kW 142 Nm
S 30 kW 195 Nm
T 37 kW 240 Nm
U 45 kW 290 Nm
W 55 kW 355 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open NG6 interface
K pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M pilot operated pressure control, pressure sensor and proportional pilot valve
type PVACRE...K35 mounted for pressure control and/or power control
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
ORDERING CODE FRAME SIZE 3
12
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
4)
Drain and flushing ports
5)
All mounting and connecting threads
6)
Pressure port 1 1/4" with 4 x M14 instead of 4 x M12
7)
Mounting interface, code K and L only
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Seals Shaft seal
N NBR FKM
V FKM FKM
W NBR PTFE
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
through
drive
code
size and
displacement
rotation
seals
Code Displacement Size
14 0 140 cm³/rev 4
180 180 cm³/rev 4
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø160 mm
Cylindric,
key
L 4-hole flange
Ø160 mm
Splined,
DIN 5480
D
SAE
ISO
3019/1
4-hole flange SAE D Cylindric, key,
SAE F
E 4-hole flange SAE D
Splined, SAE F,
SAE D
F 4-hole flange SAE D Cylindric, key,
SAE D
G 4-hole flange SAE D Splined, SAE D
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
4
6)
BSPP metr. M14
8
7)
ISO 6149 metric
Code Coupling for through drive as single part
8)
1 Single pump, no coupling
H with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG4K01
J with coupling 32 x 1.5 x 20, DIN 5480 MK-PVBG4K02
K with coupling 40 x 1.5 x 25, DIN 5480 MK-PVBG4K03
L with coupling 50 x 2 x 24, DIN 5480 MK-PVBG4K04
Y with coupling SAE A 9T-16/32 DP MK-PVBG4K11
A with coupling SAE 11T-16/32 DP MK-PVBG4K12
B with coupling SAE B 13T-16/32 DP MK-PVBG4K13
C with coupling SAE B-B 15T-16/32 DP MK-PVBG4K14
D with coupling SAE C 14T-12/24 DP MK-PVBG4K15
E with coupling SAE C-C 17T-12/24 DP MK-PVBG4K16
F with coupling SAE D, E 13T-8/16 DP MK-PVBG4K17
G with coupling SAE F 15T-8/16 DP MK-PVBG4K18
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
8)
A SAE A-2, Ø 82.55 mm MK-PVBG4Axx
B SAE B-2/4, Ø 101.6 mm MK-PVBG4Bxx
C SAE C-2/4, Ø 127.0 mm MK-PVBG4Cxx
D SAE D-4, Ø 152.4 mm MK-PVBG4Dxx
J metric, Ø 100 mm MK-PVBG4Jxx
K metric, Ø 125 mm MK-PVBG4Kxx
L metric, Ø 160 mm MK-PVBG4Lxx
See dimensions for details
8)
to be ordered separately as single part
see page 65.
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
ORDERING CODE FRAME SIZE 4
13
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z
Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Horse power / Torque control
Code
Nominal HP at 1.500 rpm Nominal torque
K 18.5 kW 120 Nm
M 22 kW 142 Nm
S 30 kW 195 Nm
T 37 kW 240 Nm
U 45 kW 290 Nm
W 55 kW 355 Nm
Y 75 kW 485 Nm
Z 90 kW 585 Nm
2 110 kW 700 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z
Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open NG6 interface
K
pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M
pilot operated pressure control, pressure sensor and proportional pilot valve
type PVACRE...K35 mounted for pressure control and/or power control
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
ORDERING CODE FRAME SIZE 4
14
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
4)
Drain and flushing ports
5)
All mounting and connecting threads
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
8 ISO 6149 metric
Code Coupling for through drive as single part
6)
1 Single pump, no coupling
H with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG5K01
J with coupling 32 x 1.5 x 20, DIN 5480 MK-PVBG5K02
K with coupling 40 x 1.5 x 25, DIN 5480 MK-PVBG5K03
L with coupling 50 x 2 x 24, DIN 5480 MK-PVBG5K04
M with coupling 60 x 2 x 28, DIN 5480 MK-PVBG5K05
Y with coupling SAE A 9T-16/32 DP MK-PVBG5K11
A with coupling SAE 11T-16/32 DP MK-PVBG5K12
B with coupling SAE B 13T-16/32 DP MK-PVBG5K13
C with coupling SAE B-B 15T-16/32 DP MK-PVBG5K14
D with coupling SAE C 14T-12/24 DP MK-PVBG5K15
E with coupling SAE C-C 17T-12/24 DP MK-PVBG5K16
F with coupling SAE D, E 13T-8/16 DP MK-PVBG5K17
G with coupling SAE F 15T-8/16 DP MK-PVBG5K18
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
6)
A SAE A-2, Ø 82.55 mm MK-PVBG5Axx
B SAE B-2/4, Ø 101.6 mm MK-PVBG5Bxx
C SAE C-2/4, Ø 127 mm MK-PVBG5Cxx
D SAE D-4, Ø 152.4 mm MK-PVBG5Dxx
E SAE E-4, Ø 165.1 mm MK-PVBG5Exx
J metric, Ø 100 mm MK-PVBG5Jxx
K metric, Ø 125 mm MK-PVBG5Kxx
L metric, Ø 160 mm MK-PVBG5Lxx
M metric, Ø 200 mm MK-PVBG5Mxx
See dimensions for details
6)
to be ordered separately as single part
see page 65.
Code Seals Shaft seal
N NBR FKM
V FKM FKM
W NBR PTFE
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
through
drive
code
size and
displacement
rotation
seals
Code Displacement Size
270 270 cm³/rev 5
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø200 mm
Cylindric,
key
L 4-hole flange
Ø200 mm
Splined,
DIN 5480
D SAE
ISO
3019/1
4-hole flange SAE E Cylindric, key
E 4-hole flange SAE E Splined, SAE
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
ORDERING CODE FRAME SIZE 5
15
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10 V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Horse power / Torque control
Code
Nominal HP at 1.500 rpm Nominal torque
T 37 kW 240 Nm
U 45 kW 290 Nm
W 55 kW 350 Nm
Y 75 kW 480 Nm
Z 90 kW 580 Nm
2 110 kW 700 Nm
3 132 kW 840 Nm
4 160 kW 1020 Nm
5 180 kW 1150 Nm
6 200 kW 1280 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open NG6 interface
K pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M pilot operated pressure control, pressure sensor and proportional pilot valve
type PVACRE...K35 mounted for pressure control and/or power control
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
ORDERING CODE FRAME SIZE 5
16
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
4)
Drain and flushing ports
5)
All mounting and connecting threads
Code Rotation
1)
R Clockwise
L Counter clockwise
1)
When looked on shaft
Code Seals Shaft seal
N NBR FKM
V FKM FKM
Standard pump is not painted. Black painted pump and ATEX (excludes electronic components) certification (Zone 2)
is available as special option. For additional informations please contact Parker Hannifin.
axial piston
pump
variable
displace-
ment
P V
mounting
interface
1
K T
R 1 1 N
control
see next page
variation
threads
code
coupling
code
through
drive
code
size and
displacement
rotation
seals
Code Displacement Size
360 360 cm³/rev 6
Code Mounting interface Shaft
K
metr.
ISO
3019/2
4-hole flange
Ø250 mm
Cylindric,
key
L
4-hole flange
Ø250 mm
Splined,
DIN 5480
R
4-hole flange
Ø224 mm
Cylindric,
key
T
4-hole flange
Ø224 mm
Splined,
DIN 5480
D
SAE
ISO
3019/1
4-hole flange SAE E Cylindric, key
E 4-hole flange SAE E
Splined,
DIN 5480
Code Port
4)
Threads
5)
1 BSPP metric
3 UNF UNC
Code Coupling for through drive as single part
6)
1 Single pump, no coupling
H with coupling 25 x 1.5 x 15, DIN 5480 MK-PVBG5K01
J with coupling 32 x 1.5 x 20, DIN 5480 MK-PVBG5K02
K with coupling 40 x 1.5 x 25, DIN 5480 MK-PVBG5K03
L with coupling 50 x 2 x 24, DIN 5480 MK-PVBG5K04
M with coupling 60 x 2 x 28, DIN 5480 MK-PVBG5K05
P with coupling 70 x 3 x 22, DIN 5480 MK-PVBG5K06
Y with coupling SAE A 9T-16/32 DP MK-PVBG5K11
A with coupling SAE 11T-16/32 DP MK-PVBG5K12
B with coupling SAE B 13T-16/32 DP MK-PVBG5K13
C with coupling SAE B-B 15T-16/32 DP MK-PVBG5K14
D with coupling SAE C 14T-12/24 DP MK-PVBG5K15
E with coupling SAE C-C 17T-12/24 DP MK-PVBG5K16
F with coupling SAE D, E 13T-8/16 DP MK-PVBG5K17
G with coupling SAE F 15T-8/16 DP MK-PVBG5K18
Code Through drive option
No adaptor for 2nd pump
T Single pump prepared for through drive
with adaptor for 2nd pump as single part
6)
A SAE A-2, Ø 82.55 mm MK-PVBG5Axx
B SAE B-2/4, Ø 101.6 mm MK-PVBG5Bxx
C SAE C-2/4, Ø 127 mm MK-PVBG5Cxx
D SAE D-4, Ø 152.4 mm MK-PVBG5Dxx
E SAE E-4, Ø 165.1 mm MK-PVBG5Exx
J metric, Ø 100 mm MK-PVBG5Jxx
K metric, Ø 125 mm MK-PVBG5Kxx
L metric, Ø 160 mm MK-PVBG5Lxx
M metric, Ø 200 mm MK-PVBG5Mxx
See dimensions for details
6)
to be ordered separately as single part
see page 65.
Code Variation
1 Standard
4 Electronic displacement sensor (CIP)
2)
5 CIP-Sensor & Spec. adjustment
3)
(4 & 9)
9 Special adjustment
3)
2)
not for horse power control, mandatory
with FDV/UD*
3)
requires Kxxxx number
ORDERING CODE FRAME SIZE 6
17
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Code Control options
0 0 1 No control
1 0 0 With cover plate, no control function (fixed displacement pump)
M M Standard pressure control
M R Remote pressure control
M F Load Sensing (flow) control
M T Two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG6 interface top side for pilot valves
1)
2 Remote pressure port int. supply , NG6 interface
2)
3 Remote pressure port ext. supply
2)
W With unloading function, 24VDC solenoid
1)
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
B Without integrated pilot valve, without NG6 interface
3)
P MTZ with mounted pilot valve PVAC1P
2)
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Horse power / Torque control
Code
Nominal HP
at 1.500 rpm
Nominal
torque
U 45 kW 290 Nm
W 55 kW 350 Nm
Y 75 kW 480 Nm
Z 90 kW 580 Nm
2 110 kW 700 Nm
3 132 kW 840 Nm
4 160 kW 1020 Nm
5 180 kW 1150 Nm
6 200 kW 1280 Nm
Function
L Horse power control with pressure control
4)
C Horse power control with load sensing (single spool)
Z Horse power control with two spool LS control
Control variation
C Standard version, integrated pilot valve
1)
1 NG 6 interface top side for pilot valve
W With unloading function, 24 VDC solenoid
K Prop.-pilot valve type PVACRE...K35 mounted
Z Without integrated pilot valve, NG6 interface,
for mounting of accessory code PVAC*
4)
B Without integrated pilot valve, without NG6 interface
1), 4)
P *ZZ with mounted pilot valve PVAC1P
2
F Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 0 - 10V
R Prop.-pilot valve PVACRE*35T with OBE mounted, command signal 4 - 20 mA
Code Control option
Electro hydraulic control
5)
F D V Proportional displacement control, no pressure compensation
U D Proportional displacement control, with pressure compensation
Control variation
R pilot operated pressure control, open
NG6 interface
K pilot operated pressure control, proportional
pilot valve type PVACRE...K35 mounted
M pilot operated pressure control, pressure sensor and proportional pilot valve
type PVACRE...K35 mounted for pressure control and/or power control
1)
not for MT & *Z
2)
only for MT & *Z
3)
not for MT & MM
4)
control variation Z and B
without pressure pilot
5)
further info in
MSG30-3254
Remark:
As torque is pretty much
speed independent
power at alternative
speeds can get recal-
culated to 1500 rpm for
code selection easily.
Example:
Your engine allows
90 kW @ 1800 rpm →
→ select a first digit
"Y"-control.
90 kW
1800 rpm
x 1500 rpm = 75 kW
ORDERING CODE FRAME SIZE 6
18
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
BV
BD
Standard Pressure Control
Control option MMC
The standard pressure control adjusts the pump
displacement according to the actual need of flow in the
system in order to keep the pressure constant.
Note: Upgrade to the MRC control by simply removing
the ISO 6149 M14x1.5-plug. Thread adapters
PVCCK** (last two digits defining seal and thread)
are available separately if required. PVCCKN1
for ex. for NBR-sealed and towards G1/4 BSPP.
Please consult spares list for all further versions.
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
Pressure adjustment range 15 to 420 bar
Factory setting pressure 50 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure 15 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
* Curve shown exaggerated
On/O valve
PRESSURE CONTROLS
Time on-stroke [ms] Time de-stroke [ms]
against
50 bar
against
350 bar
zero stroke
50 bar
zero stroke
350 bar
PV360 520 180 120 82
19
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
T
P
BV
BD
Standard Pressure Control with
NG6 Interface
Control option MM1
With code MM1 the standard pressure control has a valve
interface size NG 6 DIN 24340 (CETOP 03 acc. RP35H,
NFPA D03) on the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
S T
M
P1 P
AP
T
P A
T
T
P
BV
BD
Standard Pressure Control with
Electrical Unloading
Control option MMW
With code MMW a solenoid operated directional control
valve (D1VW002KNJW) for electrical unloading is
mounted on the control top side.
When the solenoid is de-energised, the pump compen-
sates at a stand-by pressure of typically 15 bar. When
the solenoid is energised, the pump compensates at the
pressure adjusted on the integrated pilot valve.
S
T
M
P1 P
AP
T
P A
T
T
P
BV
BD
Standard Pressure Control with
Proportional Pilot Valve
Control option MMK
With code MMK a proportional pilot valve of type
PVACRE... K35 (see page 43) is mounted on the top
side interface.
This allows a variation of the pump compensating
pressure between 20 and 350 bar by an electrical
signal.
S T
M
P1 P
AP
T
P A
T
T
P
BV
BD
Standard Pressure Control without
Integrated Pressure Pilot Valve
Control option MMZ
Control MMZ has no integrated pilot valve but a valve
interface NG6 DIN 24340 on the top.
This version is recommended for valve accessories.
For operation at >350 bar please select respective valve
accessories (see page 40)
PRESSURE CONTROLS
20
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Remote Pressure Control
Control option MRC
The remote pressure control adjusts the pump displace-
ment according to the actual need of flow in the system
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
Pressure adjustment range 15 to 420 bar
Factory setting pressure 50 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure 15 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
* Curve shown exaggerated
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
S T
M
P1 P
AP
T
P A
T
PR
BV
BD
Control schematics
On/O valve
in order to keep the pressure constant at a level given
by a remotely installed pilot valve.
PRESSURE CONTROLS
Time on-stroke [ms] Time de-stroke [ms]
against
50 bar
against
350 bar
zero stroke
50 bar
zero stroke
350 bar
PV360 520 180 120 82
21
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
PR
T
P
BV
BD
S T
M
P1 P
AP
T
P A
T
PR
T
P
BV
B
D
S T
M
P1 P
AP
T
P A
T
PR
T
P
BV
BD
Remote Pressure Control with
NG6 Interface
Control option MR1
With code MR1 the remote pressure control has a valve
interface size NG 6 DIN 24340 (CETOP 03 acc. RP35H,
NFPA D03) on the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
Remote Pressure Control with
Electrical Unloading
Control option MRW
With code MRW a solenoid operated directional control
valve (D1VW002KNJW) for electrical unloading is
mounted on the control top side.
When the solenoid is de-energised, the pump compen-
sates at a stand-by pressure of typically 15 bar. When
the solenoid is energised, the pump compensates at the
pressure adjusted on the integrated pilot valve.
Remote Pressure Control with
Proportional Pilot Valve
Control option MRK
With code MRK a proportional pilot valve of type
PVACRE...K35 (see page 43) is mounted on the top side
interface.
This allows a variation of the pump compensating pres-
sure between 20 and 350 bar by an electrical signal.
Control option MRZ
Control MRZ has no integratedpilot valve but a NG6
DIN 24340 interface topside.
S T
M
P1 P
AP
T
P A
T
PR
BV
BD
S T
M
P1 P
AP
T
P A
T
PR
T
P
BV
BD
This version is recommended for valve accessories.
Control option MRB
Control MRB has no integrated pilot valve.
Remote Pressure Control without Integrated Pressure Pilot Valve
PRESSURE CONTROLS
22
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Load Sensing Control
Control option MFC
The pilot pressure of the load sensing control is taken
from a load sensing port in the hydraulic system. It is
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
Pressure adjustment range 15 to 420 bar
Factory setting pressure 50 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure 10 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
* Curve shown exaggerated
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
Load valve
S T
M
P1
P
AP
T
P A
T
P
F
B
D
B
V
used to match pump flow to system demands. Integrated
pilot valve allows pmax adjustment.
Time on-stroke [ms] Time de-stroke [ms]
stand-by
to 50 bar
stand-by
to 350 bar
50 bar to
stand-by
350 bar to
stand-by
PV360 500 690 830 50
LOAD SENSING CONTROLS
23
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
PF
T
P
B
V
BD
Load Sensing Control with NG6 Interface
Control option MF1
With code MF1 the remote pressure control has a valve
interface size NG 6 DIN 24340 (CETOP 03 acc. RP35H,
NFPA D03) on the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
S T
M
P1 P
AP
T
P A
T
PF
T
P
BV
BD
Load Sensing Control with
Electrical Unloading
Control option MFW
With code MFW a solenoid operated directional control
valve (D1VW002KNJW) for electrical unloading is
mounted on the control top side.
When the solenoid is de-energised, the pump compen-
sates at a stand-by pressure of typically 15 bar. When
the solenoid is energised, the pump compensates at the
pressure adjusted on the integrated pilot valve.
S T
M
P1 P
AP
T
P A
T
PF
T
P
BV
BD
Load Sensing Control with
Proportional Pilot Valve
Control option MFK
With code MFK a proportional pilot valve of type
PVACRE...K35 (see page 43) is mounted on the top
side interface.
This allows a variation of the pump compensating pres-
sure between 20 and 350 bar by an electrical signal.
S T
M
P1 P
AP
T
P A
T
PF
BD
S T
M
P1 P
AP
T
P A
T
PF
T
P
BV
BD
This version is recommended for valve accessories.
Control option MFZ
Control MFZ has no integrated pilot valve but a NG6 DIN
24340 interface topside.
Load Sensing Control without Integrated Pressure Pilot Valve
Control option MFB
Control MFB has no integrated pilot valve.
LOAD SENSING CONTROLS
24
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
2 Spool Load Sensing Control
Control option MTP
The pilot pressure of the load sensing control is taken
from a load sensing port in the hydraulic system. It is
used to match pump flow to system demands. With the 2
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
Pressure adjustment range 15 to 420 bar
Factory setting pressure 50 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure
load sensing
10 bar
Factory setting dierential pressure,
pressure control
15 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
* Curve shown exaggerated
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
p
Q
Load valve
S T
M
P1 P
AP
T
P A
T
PF
P
T
WV
BV
BD1
BD2
spool control the interaction of the two control functions
is avoided by using two separate control valves for flow
and pressure compensation.
Time on-stroke [ms] Time de-stroke [ms]
stand-by
to 50 bar
stand-by
to 350 bar
50 bar to
stand-by
350 bar to
stand-by
PV360 920 670 1000 170
LOAD SENSING CONTROLS
25
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
PF
P
T
WV
BV
BD1
BD2
S T
M
P1 P
AP
T
P A
T
PF
P
T
WV
BV
BD1
BD2
2 Spool Load Sensing Control with
NG6 Interface without Integrated
Pressure Pilot Valve
Control option MTZ
Control MTZ has no integrated pressure pilot valve but
NG 6 DIN 24340 (CETOP 03 acc. RP35H, NFPA D03) on
the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
Note: The MT1 control option is not available for new
releases as is it identical to the MTZ control.
2 Spool Load Sensing Control with
Proportional Pilot Valve
Control option MTK
With code MTK a proportional pilot valve of type
PVACRE...K35 (see page 43) is mounted on the top side
interface.
This allows a variation of the pump compensating pres-
sure between 20 and 350 bar by an electrical signal.
2 Spool Load Sensing Control without
Integrated Pressure Pilot Valve
Control option MT2
Control MT2 has a valve interface NG6 DIN 24340 on
the top side and remote pressure port internal supply.
S T
M
P1 P
AP
T
P A
T
PF
P
T
WV
PR
BV
BD1
BD2
S T
M
P1 P
AP
T
P A
T
PF
P
T
WV
PR
BD1
BD2
2 Spool Load Sensing Control without
Integrated Pressure Pilot Valve
Control option MT3
Control MT3 with pressure remote port external supply.
Incl. closed NG6-pad.
LOAD SENSING CONTROLS
26
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
L
L
BD
BV
Horse Power/Torque Controls with Pressure Control
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
See Horse Power characteristic curves on page 30
Pressure adjustment range 15 to 350 bar
Factory setting pressure 350 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure 15 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
* Curve shown exaggerated
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
Load valve
Control option *LC
The horse power control type *L* provides the benefit
of the pressure control, plus the ability to limit the input
power the pump will draw. These controls are beneficial
when the power available from the prime mover for the
hydraulics is limited or the application power demand has
both high flow/low pressure and low flow/high pressure
duty cycles.
HORSE POWER/TORQUE CONTROLS
Time on-stroke [ms] Time de-stroke [ms]
against
50 bar
against
350 bar
zero stroke
50 bar
zero stroke
350 bar
PV360 90 90 100 100
27
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
L
L
P
T
B
D
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
BD
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
B
D
BV
Horse Power/Torque Control with
NG6 Interface
Control option *L1
With code *L1 the horse power control has a valve inter-
face size NG 6 DIN 24340 (CETOP 03 acc. RP35H, NFPA
D03) on the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
Horse Power/Torque Control with
Electrical Unloading
Control option *LW
With code *LW a solenoid operated directional control
valve (D1VW002KNJW) for electrical unloading is
mounted on the control top side.
When the solenoid is de-energised, the pump compen-
sates at a stand-by pressure of typically 15 bar. When
the solenoid is energised, the pump compensates at the
pressure adjusted on the integrated pilot valve.
Horse Power/Torque Control with
Proportional Pilot Valve
Control option *LK
With code *LK a proportional pilot valve of type PVACRE...
K35 (see page 43) is mounted on the top side interface.
This allows a variation of the pump compensating pres-
sure between 20 and 350 bar by an electrical signal.
Control option *LZ
Control *LZ has no integrated pilot valve but a NG6
DIN 24340 interface topside.
Horse Power/Torque Control without Integrated Pressure Pilot Valve
S T
M
P1 P
AP
T
P A
T
L
L
PR
BD
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
B
D
BV
This version is recommended for valve accessories.
Control option *LB
Control *LB has no integrated pilot valve.
HORSE POWER/TORQUE CONTROLS HORSE POWER/TORQUE CONTROLS
28
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Horse Power/Torque Controls with Load Sensing
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
See Horse Power characteristic curves on page 30
Pressure adjustment range 15 to 350 bar
Factory setting pressure 350 bar
Dierential pressure adjustment range 10 to 40 bar
Factory setting dierential pressure 15 bar
Control oil consumption Max 8.0 l/min
Typical pilot flow approx 1.5 l/min
* Curve shown exaggerated
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
Load valve
S T
M
P1 P
AP
T
P A
T
L
L
PF
BD
BV
Control option *CC
The horse power control type *C* provides the benefit of
the load sensing control, plus the ability to limit the input
power the pump will draw. These controls are beneficial
when the power available from the prime mover for the
hydraulics is limited or the application power demand
has both high flow/low pressure and low flow/high pres-
sure duty cycles.
HORSE POWER/TORQUE CONTROLS
Time on-stroke [ms] Time de-stroke [ms]
stand-by
to 50 bar
stand-by
to 350 bar
50 bar to
stand-by
350 bar to
stand-by
PV360 90 90 100 100
29
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
S T
M
P1 P
AP
T
P A
T
L
L
P
T
PF
BD
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
PF
BD
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
PF
BD
BV
S T
M
P1 P
AP
T
P A
T
L
L
P
T
PF
BD
BV
Horse Power/Torque Control with Load
Sensing & NG6 Interface
Control option *C1
With code *C1 the horse power control has a valve inter-
face size NG 6 DIN 24340 (CETOP 03 acc. RP35H, NFPA
D03) on the top side.
This interface allows the mounting of accessories like
multiple pressure selectors without the need of external
piping and valve mounting.
Horse Power/Torque Control with Load
Sensing & Electrical Unloading
Control option *CW
With code *CW a solenoid operated directional control
valve (D1VW002KNJW) for electrical unloading is
mounted on the control top side.
When the solenoid is de-energised, the pump compen-
sates at a stand-by pressure of typically 15 bar. When
the solenoid is energised, the pump compensates at the
pressure adjusted on the integrated pilot valve.
Horse Power/Torque Control with Load
Sensing & Proportional Valve
Control option *CK
With code *CK a proportional pilot valve of type
PVACRE...K35 (see page 43) is mounted on the top side
interface.
This allows a variation of the pump compensating pres-
sure between 20 and 350 bar by an electrical signal.
Control option *CZ
Control *CZ has no integrated pilot valve but NG6 DIN
24340 interface topside.
Horse Power/Torque Control with Load Sensing without Integrated Pilot Valve
S T
M
P1 P
AP
T
P A
T
L
L
PF
BD
BV
Control option *CB
Control *CB has no integrated pilot valve.
HORSE POWER/TORQUE CONTROLS HORSE POWER/TORQUE CONTROLS
30
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Typical Horse Power/Torque Control Characteristics
Flow rate Q [l/min]
Pressure p [bar]
140
12
0
10
0
80
60
40
20
0
050 100 150 200 250 300 350
PV092
PV080
PV063
S=30 kW
M=22 kW
K=18,5 kW
G=11 kW
H=15 kW
T=37 kW
W=55 kW
U=45kW
K=18.5 kW
Flow rate Q [l/min]
Pressure p [bar]
10
35
45
0
5
15
20
30
40
25
0 100 300
50 150 250200
350
PV023
PV028
PV020
PV016
K=18.5 kW
C=4 kW
D=5.5 kW
H=15 kW
B=3 kW
G=11 kW
E=7.5 kW
Flow rate Q [l/min]
Pressure p [bar]
20
70
0
10
30
40
60
50
0 100 300
50 150 250200 350
PV046
PV040
PV032
D=5.5 kW
E=7.5 kW
G=11 kW
H=15 kW
M=22 kW
K=18.5 kW
S=30 kW
PERFORMANCE CURVES
31
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Typical Horse Power/Torque Control Characteristics
Flow rate Q [l/min
Pressure p [bar]
0
50
100
150
200
250
300
350
400
450
500
550
0 50 100 150 200 250 300 350
U=45 kW
W=55 kW
Y=75 kW
Z=90 kW
2=110 kW
3=132 kW
4=160 kW
5=180 kW
6=200 kW
PV360
Speed : n = 1500 rev/min
Temperature : t = 50 °C
Fluid : HLP, ISO VG46
Viscosity : ν = 46 mm
2
/s at 40 °C
Pressure : Maximum 350 bar, depending on HP level
300
350
425
250
200
150
100
50
0
050 100 150 200 250 300
350
PV270
W=55 kW
U=45 kW
T=37 kW
3=132 kW
4=160 kW
5=180 kW
6=200 kW
Y=75 kW
2=110 kW
Z=90 kW
Flow rate Q [l/min]
Pressure p [bar]
300
270
240
210
180
15
0
120
90
60
30
0
050100 150 200 250 300
350
PV180
W=55 kW
U=45 kW
T=37 kW
M=22 kW
S=30 kW
Y=75 kW
2=110 kW
Z=90 kW
Flow rate Q [l/min]
Pressure p [bar]
K=18,5 kW
PV140
PERFORMANCE CURVES PERFORMANCE CURVES
32
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Proportional Displacement Control
Control option FDV
The proportional displacement control allows the
adjustment of the pump's output flow by an electrical
input signal. The actual displacement of the pump is
monitored by an electronic displacement sensor and
compared with the commanded displacement in an
electronic control module PQDXXA-Z10. The command
is given as an electrical input signal (0 – 10 V alternatively
4 – 20 mA) from the supervising machine control or a
potentiometer.
Control schematics
Response times of the pump are collected from a
circuit as below by measuring the pumps swash angle
movement at dierent pressures.
Dynamic characteristic of flow control *
Pressure adjustment range* 35 to 350 bar
Dierential pressure adjustment range * 10 to 40 bar
Factory setting dierential pressure * 15 bar
Control oil consumption (FDV only) Max 0.3 l/min
* Curve shown exaggerated
* Data valid for UD* version
t on stroke t
de-stroke
Displacement [%]
0
25
50
75
100
Response time
p
Q
U
Q
= FDV included
Load valve
S T
M
P1
P
AP
T
AP
T
S
I
Version FDV of the proportional control does not provide
pressure compensation. Therefore the hydraulic circuit
must be protected by a pressure relief valve.
New
CIP-Sensor
(contactless
inductive position)
eliminates drift
due to wear and any
manual sensor
adjustments.
Time on-stroke [ms] Time de-stroke [ms]
stand-by
to 50 bar
stand-by
to 350 bar
50 bar to
stand-by
350 bar to
stand-by
PV360 255 154 266 183
Internal pilot pressure required to control the pump
FDV 15 bar
UDR 25 bar
UDK 25 bar
UDM 25 bar
ELECTRONIC P/Q CONTROLS
33
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Proportional Displacement Control with
Overriding Pressure Control
Control option UDR without pressure relief pilot
valve
Control version UDR provides electro-hydraulic displace-
ment control and pressure stage mounted on an elbow
manifold.
The elbow manifold provides NG6/D03 interface on top
to mount a pressure pilot valve (not included in UDR).
Proportional Displacement Control with
Proportional Pressure Control
Control option UDK
Control version UDK features proportional pressure pilot
valve PVACRE...K35, which enables for electro-hydraulic
p/Q control.
By using the digital module PQDXXA-Z10 it is possible to
control the displacement proportionally with overriding
open loop proportional pressure control.
Proportional Displacement Control with
Closed Loop Pressure Control
Control option UDM
Control version UDM includes pressure transducer
Parker SCP 8181 CE. In combination with control module
PQDXXA-Z10 both closed loop pressure control as well
as electronic power limitation can be realized.
= UD* included
U
P
U
Q
U
L
Q
p
S T
M
P1
P
AP
T
AP
T
S
I
P
T
M
WV
B
P
B
D2
AP TAP
P
T
P
S T
M
P1
P
AP
T
AP
T
S
I
P
T
M
WV
B
P
B
D2
AP TAP PT
P
S T
M
P1
P
AP
T
AP
T
S
I
P
T
P
U
M
WV
B
P
B
D2
AP TAP PT
P
ELECTRONIC P/Q CONTROLS ELECTRONIC P/Q CONTROLS
34
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
PV020
PV023 PV028
Efficiency and case drain flows PV016,
PV020, PV023 and PV028
The eciency and power graphs are measured at an
input speed of n = 1500 rpm, a temperature of 50 °C and
a fluid viscosity of 30 mm
2
/s.
Case drain flow and compensator control flow leave via
the drain port of the pump. To the values shown are to
be added 1 to 1.2 l/min, if at pilot operated compensa-
tors the control flow of the pressure pilot valve also goes
through the pump.
Please note: The values shown below are only valid
for static operation. Under dynamic conditions and at
rapid compensation of the pump the volume displaced
by the servo piston also leaves the case drain port. This
dynamic control flow can reach up to 40 l/min! Therefore
the case drain line is to lead to the reservoir at full size
and without restrictions as short and direct as possible.
Case drain flow PV016-028 with pressure
compensator
Efficiency, power consumption
P V 016
0
0
100
200
300
360
2
4
6
8
10
12
14
Pressure [bar]
full flow
dead head
Drain flow [l/min]
overall eciency
overall eciency
vol. eciency
output flow
4
0
8
12
16
20
0
100 200300
0
20
40
60
80
100
0
5
10
15
20
25
Pressure [bar]
Output flow [l/min]
Input power [kW]
overall eciency
input power at full flow
input power at deadhead
Eciency [%] (overall, volumetric)
output flow, vol. eciency
5
0
10
15
20
25
0
100 200300
0
20
40
60
80
100
0
6
12
18
24
30
Pressure [bar]
Output flow [l/min]
Input power [kW]
input power at full flow
input power at deadhead
Eciency [%] (overall, volumetric)
vol. eciency
5
0
10
15
20
25
0
100 200300
0
20
40
60
80
100
0
8
16
24
32
40
Pressure [bar]
Output flow [l/min]
Input power [kW]
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
5
0
10
15
20
25
0
100 200 300
0
20
40
60
80
100
0
10
20
30
40
50
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
EFFICIENCY & CASE DRAIN FLOWS
35
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Efficiency and case drain flows
PV032 to PV046
The eciency and power graphs are measured at an
input speed of n = 1500 rpm, a temperature of 50 °C and
a fluid viscosity of 30 mm
2
/s.
Case drain flow and compensator control flow leave via
the drain port of the pump. To the values shown are to
be added 1 to 1.2 l/min, if at pilot operated compensa-
tors the control flow of the pressure pilot valve also goes
through the pump.
Please note: The values shown below are only valid
for static operation. Under dynamic conditions and at
rapid compensation of the pump the volume displaced
by the servo piston also leaves the case drain port. This
dynamic control flow can reach up to 60 l/min! Therefore
the case drain line is to lead to the reservoir at full size
and without restrictions as short and direct as possible.
Case drain flow PV032-046 with pressure
compensator
Efficiency, power consumption
PV032
PV040
PV046
0
0
100
200
300 360
2
10
12
14
4
8
6
Pressure [bar]
full flow
dead head
Drain flow [l/min]
vol. eciency
10
0
20
30
40
50
0
100 200300 350
0
20
40
60
80
100
0
8
16
24
32
40
Pressure [bar]
Output flow [l/min]
Input power [kW]
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
12
0
24
36
48
60
0
100 200 300
350
0
20
40
60
80
100
0
10
20
30
40
50
Pressure [bar]
Output flow [l/min]
Input power [kW]
overall eciency
input power at full flow
input power at deadhead
output flow, vol. eciency
Eciency [%] (overall, volumetric)
10
0
20
30
40
50
0
100 200300
350
0
20
40
60
80
100
0
16
32
48
64
80
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
EFFICIENCY & CASE DRAIN FLOWS EFFICIENCY & CASE DRAIN FLOWS
36
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Case drain flows PV063-092
Efficiency, power consumption
PV063
Efficiency and case drain flows PV063,
PV080, PV092
The eciency and power graphs are measured at an
input speed of n = 1500 rpm, a temperature of 50 °C and
a fluid viscosity of 30 mm
2
/s.
Case drain flow and compensator control flow leave via
the drain port of the pump. To the values shown are to
be added 1 to 1.2 l/min, if at pilot operated compensa-
tors the control flow of the pressure pilot valve also goes
through the pump.
Please note: The values shown below are only valid
for static operation. Under dynamic conditions and at
rapid compensation of the pump the volume displaced
by the servo piston also leaves the case drain port. This
dynamic control flow can reach up to 80 l/min! Therefore
the case drain line is to lead to the reservoir at full size
and without restrictions as short and direct as possible.
PV080
PV092
12
8
4
0
0 100 200
300 360
Pressure [bar]
full flow
dead head
Drain flow [l/min]
14
0
28
42
56
70
0 100 200300
0
20
40
60
80
100
0
20
40
60
80
100
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
16
0
32
48
64
80
0 100 200300
0
20
40
60
80
100
0
24
48
72
96
120
Pressure [bar]
Output flow [l/min]
Input power [kW]
overall eciency
input power at full flow
input power at deadhead
output flow, vol. eciency
Eciency [%] (overall, volumetric)
20
0
40
60
80
100
0 100 200300
0
20
40
60
80
100
0
30
60
90
120
150
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
EFFICIENCY & CASE DRAIN FLOWS
37
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Efficiency and case drain flows PV140, PV180
The eciency and power graphs are measured at an
input speed of n = 1500 rpm, a temperature of 50 °C and
a fluid viscosity of 30 mm
2
/s.
Case drain flow and compensator control flow leave via
the drain port of the pump. To the values shown are to
be added 1 to 1.2 l/min, if at pilot operated compensa-
tors the control flow of the pressure pilot valve also goes
through the pump.
Please note: The values shown below are only valid
for static operation. Under dynamic conditions and at
rapid compensation of the pump the volume displaced
by the servo piston also leaves the case drain port. This
dynamic control flow can reach up to 120 l/min! Therefore
the case drain line is to lead to the reservoir at full size
and without restrictions as short and direct as possible.
Efficiency, power consumption
PV140
Case drain flows PV140-180
PV180
30
0
60
90
120
150
0 100 200300
0
20
40
60
80
100
0
50
100
150
200
250
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
35
0
70
105
140
175
0 100 200300
0
20
40
60
80
100
0
60
120
180
240
300
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
18
12
6
0
0 100 200
300 360
Pressure [bar]
full flow
dead head
Drain flow [l/min]
EFFICIENCY & CASE DRAIN FLOWS EFFICIENCY & CASE DRAIN FLOWS
Efficiency and case drain flows PV270
The eciency and power graphs are measured at an
input speed of n = 1500 rpm, a temperature of 50 °C and
a fluid viscosity of 30 mm
2
/s.
Case drain flow and compensator control flow leave via
the drain port of the pump. To the values shown are to
be added 1 to 1.2 l/min, if at pilot operated compensa-
tors the control flow of the pressure pilot valve also goes
through the pump.
Please note: The values shown below are only valid
for static operation. Under dynamic conditions and at
rapid compensation of the pump the volume displaced
by the servo piston also leaves the case drain port. This
dynamic control flow can reach up to 120 l/min! Therefore
the case drain line is to lead to the reservoir at full size
and without restrictions as short and direct as possible.
Efficiency, power consumption
PV270
Case drain flows PV270
24
16
8
0
0 100 200
300 360
Pressure [bar]
full flow
dead head
Drain flow [l/min]
50
0
100
150
200
250
0 100 200300
0
20
40
60
80
100
0
100
200
300
400
500
Pressure [bar]
Output flow [l/min]
Input power [kW]
vol. eciency
overall eciency
input power at full flow
input power at deadhead
output flow
Eciency [%] (overall, volumetric)
38
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
EFFICIENCY & CASE DRAIN FLOWS
39
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Typical efficiency at full displacement
and 1500 rpm PV360
The curves show typical characteristics measured under
following conditions:
Fluid: Mineral oil ISO VG 22 at 32 °C
Inlet pressure 1,0 bar (absolute), measured at inlet port.
60%
70%
80%
90%
100%
0255075 100 125150 175200 225250 275300 3253
50
vol. eciency
Overall
Pressure [bar]
Eciency [%]
Typical inlet characteristics vs. speed at
various percentage displacements
Inlet characteristics PV360
1500
1550
1600
1650
1700
1750
1800
1850
0.80.9 1.
01.1
Displacement
95% 100%
Inlet pressure [bar]
Self priming speed [rpm]
Typical drive power at full displacement
Input power – full stroke PV360
Typical compensated power
Input power – zero stroke PV360
0
50
100
150
200
250
300
350
400
0255075 100 125 150175 200225 250275 300325 350
1750 rpm
1500 rpm
Pressure [bar]
Input power [kW]
0
5
10
15
20
25
30
35
0255075 100 125 150 175 200 225 250 275 300 325 35
0
1750 rpm
1500 rpm
Pressure [bar]
Input power [kW]
Case drain flows PV360
Pressure [bar]
Drain flow [l/min]
24
32
40
16
8
0
0 100 200
300 360
full flow
dead head
EFFICIENCY & CASE DRAIN FLOWS PERFORMANCE CURVES
40
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
AC
PV
Function
Solenoid
For
PV
pump
series
Adjustment
Seals
Accessories
for
controls
Solenoid
acces-
sories
Mounting
bolts
Nominal
pressure
PVAC2P* PVAC2M*/PVAC2E*
PVAC1E*PVAC1P*
Dimensions
Threads
Code Function
1P Max. pressure relief
1E
1 pressure,
electrical unloading
stand by default
2P
2 pressures,
electrical selection
2E
2 pressures + stand by
electrical selection
low pressure default
2M
2 pressures + stand by
electrical selection
stand by default
Code Solenoid voltage
omit For function 1P
Y 110V/50Hz – 120V/60Hz
T 220V/50Hz – 240V/60Hz
J 24V DC
Code Mounting bolts
C For single controls
S Without bolts
M For code UD*/MT*
Code Threads
M Metric
-
without
bolts
Code
Adjustment
S
Spindle with
lock nut
Code Solenoid accessories
omit For function 1P
W
DIN plug socket
without plug
Code Seals
N NBR
V FPM
Code Nominal pressure
35 350 bar
42 420 bar
Adjustment
Code S
Warning: Risk of damaging bolt holes! Prior design se-
ries will need UNC bolts for pumps with threadcode "3".
48
133
High
pressure
Low
pressure
DC solenoid 205
AC solenoid 190
173
97
41
48
133
High
pressure
Low
pressure
DC solenoid 241
AC solenoid 211
173
97
41
173
97
41
48
133
DC solenoid 205
AC solenoid 190
173
97
41
ACCESSORIES CONTROL
41
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Schematics PVAC1P* Schematics PVAC1E*
Schematics PVAC2P*
Schematics PVAC2M*/PVAC2E*
*2M*
ACCESSORIES CONTROL ACCESSORIES CONTROL
42
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Technical data
Proportional pressure relief valve
PVACRE*
The pressure relief valve PVACRE* is a direct operated
proportional valve, which is typically used for a remote
pressure control.
Function
When the pressure in port P exceeds the pressure set-
ting at the solenoid, the cone opens to port T and limits
the pressure in port P to the adjusted level. The optimum
performance can be achieved in combination with the
digital amplifier module PCD00A-400.
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*
General
Nominal size DIN NG06 / CETOP03 / NFPA D03
Mounting position as desired, horizontal mounting preferred
Ambient temperature [°C] -20 ... +70
Weight [kg] 1.8
Hydraulic
Max. operating pressure [bar] Port P up to 420; port T depressurized
Pressure stages [bar] 350, 420
Fluid Hydraulic oil as per DIN 51524 ... 525
Viscosity, recommended
permitted
[cSt]/ [mm²/s]
[cSt]/ [mm²/s]
30 ... 80
12 ... 380
Fluid temperature [°C] -20 ... +60
Filtration ISO 4406 (1999), 18/16/13
Linearity [%] ±4
Repeatability [%] ±2
Hysteresis [%] ±4.5 of p
max
Electrical
Duty ratio [%] 100 ED
Protection class IP 65 in accordance with EN 60529 (plugged and mounted)
Nominal voltage [V] 12 (2.2 A for nominal pressure)
Coil resistance [Ohm] 4.4 at 20°C
Solenoid connection Connector as per EN 175301-803
Power amplifier, recommended
PCD00A-400 (open loop – NO sensor),
PWDXXA-400 (closed loop – with pressure sensor)
Recommended dither frequency [Hz] 60
Recommended dither amplitude [%] 4
43
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Ordering code proportional pressure relief valve
Schematic PVACRE* Dimensions PVACRE*
AC
PV
Prop.
pressure
valve
Pump
series PV
Seal
Accessories
for controller
RE K
Nominal
pressure
Mounting
bolts
Thread
option
Example for PVACRE* mounted
ST
M
P1 P
AP
T
PA
T
T
P
1/16" NPT for A,
M5 for T
Code Nominal pressure
35 350 bar
42 420 bar
Code Seal
N NBR
V FPM
Code Thread option
M Metric
- if less bolts
Code Mounting bolts/ ports
C For single controller
S Without bolts
M
For code UD*/MT*
design series 45 – 47
12VDC
Warning:
Risk of damaging bolt holes! Prior design series will need
UNC bolts for pumps with threadcode "3".
Orifice
Ø 1.2 mm
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*
44
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Technical data
Proportional pressure relief valve with
OBE PVACRE*T
The direct operated proportional pressure valves of the
RE06M*T series with integrated electronics are based
on the functionality of the PVACRE series. The digital
onboard electronic are securely housed in a robust
metal box and can also be used under harsh ambient
conditions. The optimized linearization and the set valve
parameters were specifically adapted to the pumps of
the PVplus series.
Valve parameters can be adjusted and diagnostic valves
displayed by using the ProPxD software and the option-
ally available parameterization cable.
Function
When the pressure in port P exceeds the pressure setting
at the solenoid, the cone opens to port T and limits the
pressure in port P to the adjusted level.
Connector for
parameterization
central
connector
Air Bleed
valve
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*T
General
Nominal size DIN NG06 / CETOP03 / NFPA D03
Mounting position as desired, horizontal mounting preferred
Ambient temperature [°C] -20 ... +70
Weight [kg] 2.2
Hydraulic
Max. operating pressure [bar] Port P up to 420; port T up to 30
Pressure stages [bar] 350, 420
Fluid Hydraulic oil as per DIN 51524 ... 525
Viscosity, recommended
permitted
[cSt]/ [mm²/s]
[cSt]/ [mm²/s]
30 ... 80
12 ... 380
Fluid temperature [°C] -20 ... +60
Filtration ISO 4406 (1999), 18/16/13
Linearity [%] ±4
Repeatability [%] ±2
Hysteresis [%] ±4.5 of p
max
Electrical
Duty ratio [%] 100 ED
Protection class IP 65 in accordance with EN 60529 (plugged and mounted)
Nominal voltage [V] 18 ... 30 (2 A for nominal pressure)
Coil resistance [Ohm] 4.4 at 20°C
Solenoid connection Connector as per EN 175301-803
45
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Ordering code proportional pressure relief valve with OBE
Schematic PVACRE*T Dimensions PVACRE*T
AC
PV
Prop.
pressure
valve
Pump
series PV
Seal
Accessories
for controller
RE
Nominal
pressure
Mounting bolts Thread
option
Example for PVACRE* T mounted
Code Nominal pressure
35 350 bar
42 420 bar
Code Seal
N NBR
V FPM
Command
Siglnal
Warning:
Risk of damaging bolt holes! Prior design series will need UNC bolts for pumps with threadcode "3".
Code Command signal
F 0...10 V
R 4...20 mA
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
THIS DOCUMENT A ND THE INFORMATION IT C ONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MA Y NOT BE COPIED OR DIS CLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTH ER THAN CONDUCTING BU SINESS WITH PARKER, AN D MUST BE RETURNED O R DESTROYED AND ALL FUR THER USE DISCONTINUE D AT PARKER'S REQUE ST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED T HAT IMPROPER SELEC T
ION OR IMPROPER USE OF PARKER SYSTEMS O R COMPONENTS CAN CAUSE DEATH, PERSONA L INJURY AND PROPERTY DA MAGE, AND IS
SOLELY RESPONSI BLE THROUGH ITS OWN A NALYSIS AND TESTING FO R THE FINAL SELECTIO N OF PARKER SYSTEM A ND COMPONENTS AND AS SURING THAT ALL PERFO RMANCE, ENDURANCE, MA INTENANCE,
SAFETY AND WARN ING REQUIREMENTS OF THE INTENDED APPLICA TION ARE MET. COPYRIGH T PARKER. YEAR OF CO PYRIGHT IS THE YEA
R(S) INDICATED O N THIS DOCUMENT. A LL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
1 1
OF
KPP2200301
LL607145
Material
Generic
N/A
MM
THIRD ANGLE PROJECTION
1
2
0
167
P
A
T
3
1
4
6
77
40.5
9.5
5.5
1/16" NPT für A
M5 für T
7
0
6 + PE
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
THIS DOCUMENT A ND THE INFORMATION IT C ONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MA Y NOT BE COPIED OR DIS CLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTH ER THAN CONDUCTING BU SINESS WITH PARKER, AN D MUST BE RETURNED O R DESTROYED AND ALL FUR THER USE DISCONTINUE D AT PARKER'S REQUE ST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED T HAT IMPROPER SELEC T
ION OR IMPROPER USE OF PARKER SYSTEMS O R COMPONENTS CAN CAUSE DEATH, PERSONA L INJURY AND PROPERTY DA MAGE, AND IS
SOLELY RESPONSI BLE THROUGH ITS OWN A NALYSIS AND TESTING FO R THE FINAL SELECTIO N OF PARKER SYSTEM A ND COMPONENTS AND AS SURING THAT ALL PERFO RMANCE, ENDURANCE, MA INTENANCE,
SAFETY AND WARN ING REQUIREMENTS OF THE INTENDED APPLICA TION ARE MET. COPYRIGH T PARKER. YEAR OF CO PYRIGHT IS THE YEA
R(S) INDICATED O N THIS DOCUMENT. A LL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
1 1
OF
KPP2200301
LL607145
Material
Generic
N/A
MM
THIRD ANGLE PROJECTION
1
2
0
167
P
A
T
3
1
4
6
77
40.5
9.5
5.5
1/16" NPT für A
M5 für T
7
0
6 + PE
Code Thread option
M Metric
- if without bolts
Code Mounting bolts/ ports
C For single controller
S Without bolts
M
For code UD*/MT*
design series 45 – 47
T
Onboard
elec-
tronics
ST
M
P1 P
AP
T
PA
T
T
P
Orifice
Ø 1.2 mm
Code F
6 + PE acc.
EN 175201-804
Code R
6 + PE acc.
EN 175201-804
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*T
PROPORTIONAL PRESSURE RELIEF
VALVE PVACRE*T
46
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Technical data
For programming the module via PC an interface cable is needed, please order part number PQDXXA-ZXX-KABEL separately.
Ordering code
Option
For all
frame sizes
series PV
Digital control
module for p/Q
control
Version A
PQD
XX A
Z10
Programming software
The programming of the p/Q control module is done in
an easy to learn mode. To select the pump model and
size and to set the control parameters the program
ProPVplus must be started. The program runs under
common windows systems.
Latest software available at: www.parker.com/pmde
Features
• Display and documentation of parameter sets
• Save and reload of optimized parameter sets
• Oers oscilloscope function for easy performance
evaluation and optimization
• Parameter sets for all PVplus pumps are pre-installed
in the modules
Features
• Digital control circuit
• Covers all displacements
• Covers all available functions (pressure,
displacement, power)
• Predefined parameter sets (Plug & Play)
• Connection via USB cable (USB-A/USB-B)
• Ramp time up to 60 seconds
• Compliant to the relevant european EMC
specifications
• Oine editing of parameter sets
• Error diagnosis
• Easy hands on control tuning due to online moni-
toring of PID gains
• All settings (ramps, MIN/MAX, control parameters)
can be stored digitally and recalled from a PC to
duplicate settings to other modules
downward compatible * Z00
Mounting style Snap-on mounting for EN50022 rail
Body material Polycarbonate
Inflammation class V2...V0 acc. UL 94
Mounting position any
Env. temperature range [°C] -20...+55
Protection class IP 20 acc. DIN 40 050
Weight [g] 260
Duty ratio [%] 100
Supply voltage [V] 18...30 VDC, ripple <5 % e.
Rush in current [A] 22 for 0.2 ms
Current consumption [A] < 4 for p/Q control ; < 2 for Q-control
Resolution Input Command [%] 0.025 (power 0.1)
Interface USB-Typ B
EMC EN 50 081-2, EN 50 082-2
Connctors Screw terminals 0.2...2.5 mm², plug in style
Cables [mm²] Supply and solenoid cables; 1.5 mm
2
(AWG16) overall braid shield.
Sensor and command signals; 0.5 mm
2
(AWG20) overall braid shield
Max. cable length [m] 50
ELECTRONIC MODULE PQDXXA
47
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Technical data
Programming software
The programming of the p/Q control module is done
in an easy to learn mode. To select the pump model
and size and to set the control parameters the program
ProPVplus must be started. The program runs under
common windows systems.
Latest software available at: www.parker.com/pmde
Features
• Display and documentation of parameter sets
• Save and reload of optimized parameter sets
• Oers oscilloscope function for easy performance
evaluation and optimization
• Parameter sets for all PVplus pumps are pre-installed
in the modules
Features
• Control, monitor and parameter setting via
Profinet ® interface
• Covers all displacements and controls (pressure,
displacement, power)
• Quick and easy integration with available GSDML and
predefined and online available function blocks for I/
Os as well as parametrization
• Full integration into overlaying machine control (PLC
+ HMI) Process parameter, Static Parameter, Conditions
• Predefined data sets for Plug&Play commissioning
• Quick and easy wiring with Push in contact blocks
• Switch function with two RJ45 ports
• Alternative Connection via USB cable (USB-A/USB-B)
• Compatible to the relevant european EMC specification
• Certified by Profibus User Organisation
• Easy error diagnosis
Option
For all
frame sizes
series PV
Digital control
module for p/Q
control
Version A
PQD
XX A PROFINET
Z10
Ordering code
Further information at bulletin MSG30-3256-INST/UK
Mounting style Snap-on mounting for EN50022
Body material Polyamide PA6.6
Inflammation class V0 acc. UL 94
Mounting position any
Env. temperature range [°C] -20...+55
Protection class IP 20 acc. DIN 40 050
Weight [g] 260
Duty ratio [%] 100
Supply voltage [V] 18...30 VDC, ripple <5 % e.
Rush in current [A] 22 for 0.2 ms
Current consumption [A] < 4 for p/Q control ; < 2 for Q-control
Resolution Input Command [%] 0.025 (power 0.1)
Interface 2 x RJ45, USB-B
EMC EN61000-6-2: 2005 (Immunity), EN61000-6-3: 2007 +A1: 2010 (Emission)
Connectors Push in terminals 0.2...2.5 mm², plug in style
Cables [mm²] Supply and solenoid cables; 1.5 mm
2
(AWG16) overall braid shield.
Sensor and command signals; 0.5 mm
2
(AWG20) overall braid shield
Max. cable length [m] 50
ELECTRONIC MODULE
PQDXXAPROFINETZ10
48
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Technical data
PVplus Condition Monitoring
Parker‘s Condition Monitoring Solution is added to a
PVplus pump and consists of a PAC120 controller, a
suite of sensors and an easy-to-install mounting kit to
track and monitor PVplus under all operating conditions.
This solution provides a cost-eective package
to increase pump’s lifespan and minimizes the risk of
unplanned downtime in high availability applications.
Key Features
- Anomaly Detection
- Threat Detection with Limits Checks and Warnings
- Live Data Monitoring
- Trend Data Tracking
- Graphical User Interface
- Communication Protocols
(PROFINET, ETHERCAT, ETHERNET/IP)
- OPC UA functionality
PVPLUS CONDITION MONITORING
Model
Basic
Data Tracking, Limit Check, Trend Data,
Standard Communication Protocols
Advanced Basic + Anomaly Detection
Components
Pressure Sensor
Housing -1..15 bar, 4..20 mA, round plug M12x1, 4 pin
Inlet -1..15 bar, 4..20 mA, round plug M12x1, 4 pin
Outlet 0..600 bar, 4..20 mA, round plug M12x1, 4 pin
Displacements Housing CIP Sensor, 4..20 mA, round plug M12x1, 4 pin
Controller
Control module, 24 V DC (19,2… 28,8)
Network 1 x Ethernet 10/100 MBit–RJ45, OPC UA
Fieldbus
Profinet IO/IRT Slave, EtherCAT Slave* or
EtherNet/IP Adapter*
Housing/protection type Aluminum carrier, plastic, IP20
Mounting 35 mm DIN rail
Mounting position Vertical, stackable
Operating temperature 0 °C...+55 °C
Excluded: Signal Converter
* on demand, please ask Parker Hannifin for more information
49
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Dimensions
Frame Size
Dimensions
1 2 3 4 5 6
A 149 159 181 206 233 233
B 86 105 125 125 152 152
C 88 102 126 126 155 155
D 118 133 146 159 177 177
PV
MK
Seal
Option
Pumps
series PV
Condition
Monitoring
CM
Mounting
Kit
Thread
Option
Code Thread Option
1 BSPP
Code Seal Option
V FKM
1 V
Ordering code Dimensions
Ordering code
Communication
Implemen-
tation
Code Communication
P Profinet IO/IRT
T** EtherCAT Slave
E** EtherNet/IP Adapter
Code Implementation
B Basic
C Advanced
Displacement
Sensor
Code Displacement Sensor
1
w/o Electronic displacement sensor (CIP)*
4 with Electronic displacement sensor (CIP)
* only for attachments to pumps
already equipped with CIP sensor
AE
PV
Condition
Monitoring
Pumps
series PV
Pump
accessories
CM
Dimensions
Mounting Kit
Evaluation electronics
PVPLUS CONDITION MONITORING
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
1 1
OF
PV046_CM_Rendering
LL607145
Material
N/A
MM
THIRD ANGLE PROJECTION
A
B
C
E
67
50
1
2
4
1
2
2
1
2
4
6
1
83
69
100
A
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
1 1
OF
PV046_CM_Rendering
LL607145
Material
N/A
MM
THIRD ANGLE PROJECTION
A
B
C
E
67
50
1
2
4
1
2
2
1
2
4
6
1
83
69
100
A
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
1 1
OF
PV046_CM_Rendering
LL607145
Material
N/A
MM
THIRD ANGLE PROJECTION
A
B
C
E
67
50
1
2
4
1
2
2
1
2
4
6
1
83
69
100
A
** on demand, please ask
Parker Hannifin for
more information
* A or E are not used together
A*
E*
BG
Frame
Size
Code Frame Size
1 PV016 - PV028
2 PV032 - PV046
3 PV063 - PV092
4 PV140 - PV180
5 PV270
6 PV360
Evaluation kit contains PAC120,
PACIO, software, pressure Sensors,
(Displacement Sensor)
Mounting kit contains flange for inlet
and outlet and adapter for drain port
50
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
max. 212
13
52
Ø25
k6
Ø100
h8
131
32
10
94
219
79
132
max. 130
12
125
55
48
15
50
119
43
18
Ø100
h8
90
PV016-028, metric version
Shown is a clockwise rotating pump with standard pressure
compensator. Counter clockwise rotating pumps have inlet,
outlet and gage port reversed.
4xM10, 18 deep
optional 7/16"-14UNC-2B
(thread options 3)
OUTLET for metric and SAE version:
flage acc. ISO 6162
DN19; PN400
INLET for metric and SAE version:
flage acc. ISO 6162
DN32; PN250
4xM10, 18 deep
optional 3/8"-16UNC-2B
(thread options 3)
50.8
23.8
30.2
58.7
Mounting optional L
splined shaft W25x1.5x15x8f
DIN 5480
max. 212
13
52
Ø25
k6
Ø100
h8
131
32
10
94
219
79
132
max. 130
12
125
55
48
15
50
119
43
18
Ø100
h8
90
The pump shown above has
Mounting option K
and through drive variation T
(prepared for through drive)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
32
1
0
0
h
8
1
3
1
2
5
k
6
Ø
5213
2
1
8
9
4
7
9
132
130max
12.5
212max
198
12
5
1
2
2
8
-
0
.
2
5
5
0
1
5
5
2
5
5
119
8
9
6
5
PV016 - PV028 metric version
Interface for h
orse power cartridge
or CIP Senso
r for displacement feedback
Drain port L1 G1/2" (thread option
1)
optional M22x1,5; ISO 6149-1 (thr
ead option 8)
or 7/8"-14 UNF (thread option 3)
Gage M14x1,5; ISO 6149-1
Drain port L2 and L3 (oppisite)
G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Bearing flushing port L4 G1/4" (thread option 1)
optional M12x1,5; ISO 6149-1 (thread option 8)
or 7/16"-20 UNF (thread option 3)
key
8x7x40 DIN 6885
thread M10 - 22 deep
THIRD ANGLE PROJECTION
161
Interface for horse power
pilot cartridge or CIP for
displacement feedback
Drain port L1; G1/2"
optional M22x1.5; ISO 6149-1
(thread options 8) or
7/8"-14 UNF (thread option 3)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
32
1
0
0
h
8
1
3
1
2
5
k
6
Ø
5213
2
1
8
9
4
7
9
132
130max
12.5
212max
198
12
5
1
2
2
8
-
0
.
2
5
5
0
1
5
5
2
5
5
119
8
9
6
5
PV016 - PV028 metric version
Interface for horse power cartridge
or CIP Sensor for displacement feedback
Drain port L1 G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Gage M14x1,5; ISO 6149-1
Drain port L2 and L3 (oppisite)
G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Bearing fl
ushing port L4 G1/4" (thread option 1)
optional M12x1,5; ISO 6149-1 (thread option 8)
or 7/16"-20 UNF (thread option 3)
key
8x7x40 DIN 6885
thread M10 - 22 deep
THIRD ANGLE PROJECTION
161
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
32
1
0
0
h
8
1
3
1
2
5
k
6
Ø
5213
2
1
8
9
4
7
9
132
130max
12.5
212max
198
12
5
1
2
2
8
-
0
.
2
5
5
0
1
5
5
2
5
5
119
8
9
6
5
PV016 - PV028 metric version
Interface for horse power cartridge
or CIP Sensor for displacement feedback
Drain port L1 G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Gage M14x1,5; ISO 6149-1
Drain port L2 and L3 (oppisite)
G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Bearing fl
ushing port L4 G1/4" (thread option 1)
optional M12x1,5; ISO 6149-1 (thread option 8)
or 7/16"-20 UNF (thread option 3)
key
8x7x40 DIN 6885
thread M10 - 22 deep
THIRD ANGLE PROJECTION
161
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
32
1
0
0
h
8
1
3
1
2
5
k
6
Ø
5213
2
1
8
9
4
7
9
132
130max
12.5
212max
198
12
5
1
2
2
8
-
0
.
2
5
5
0
1
5
5
2
5
5
119
8
9
6
5
PV016 - PV028 metric version
Interface for horse power cartridge
or CIP Sensor for displacement feedback
Drain port L1 G1/2" (thread option 1)
optional M22x1,5; ISO 6149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Gage M14x1,5; ISO 6149-1
Drain port L2 and L3 (op
pisite)
G1/2" (thread option 1)
optional M22x1,5; ISO 6
149-1 (thread option 8)
or 7/8"-14 UNF (thread option 3)
Bearing flushing port L4 G1/4"
(thread option 1)
optional M12x1,5; ISO 6149-1
(thread option 8)
or 7/16"-20 UNF (thread optio
n 3)
key
8x7x40 DIN 6885
thread M10 - 22 d
eep
THIRD ANGLE PROJECTION
161
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
key 8x7x40
DIN 6885
thread M10,
22 deep
Drain port L2
and L3 (opposite);
G1/2" (thread
option 1)
optional M22x1.5; ISO 6149-1 (thread options 8)
or 7/8"-14 UNF (thread option 3)
Bearing flushing port L4 G1/4"
(thread option 1) optional
M12x1.5; ISO 6149-1 (thread
option 8) or 7/16"-20 UNF
(thread option 3)
Thread for transport:
M8x1.25; 8 deep
PUMP DIMENSIONS
51
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIE D OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE Y EA
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
8
9
.
8
1
3
.
5
89.8
PV016 - 028, SAE version
1
0
1
.
6
-
0
.
0
5
9.3
2
5
.
4
-
0
.
0
5
Ø
2
8
.
2
0
.
1
5
50
key 6.35x6.35
40 long
thread
3/8"-16 UNC-2B
22 deep
THIRD ANGLE PROJECTION
Variation with through drive
PV016-028, SAE version
Shown above is
Mounting option D
Mounting option E
Splined shaft 15T-16/32 DP,
flat root, side fit ANSI B92.1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIE D OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED A ND ALL FURTHER USE DISCONTINUED AT PARKER 'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURA NCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE Y EA
R(S) INDICATED ON THIS DOCUMENT . ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
19,4 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
8
9
.
8
1
3
.
5
89.8
PV016 - 028, SAE version
1
0
1
.
6
-
0
.
0
5
9.3
2
5
.
4
-
0
.
0
5
Ø
2
8
.
2
0
.
1
5
50
key 6.35x6.35
40 long
thread
3/8"-16 UNC-2B
22 deep
THIRD ANGLE PROJECTION
key 6.35 x 6.35
40 long
thread 3/8"-16 UNC-2B
22 deep
46
20
50
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS A ND ASSURING THAT ALL PERFORMANCE, ENDURAN CE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
21,0 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
A
B
27
47
D
F
E
G
8
4
.
8
ØC
198
Variation with thru drive
THIRD ANGLE PROJECTION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMAT ION IT CONTAINS IS CONFIDENTIAL AND PROPR IETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARK ER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS AD VISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYS TEMS OR COMPONENTS CAN CAUSE DEATH, PERS ONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SE LECTION OF PARKER SYSTEM AND COMPONENTS A ND ASSURING THAT ALL PERFORMANCE, ENDURAN CE, MAINTENANCE,
SAFETY AND WARNING REQUIREMEN TS OF THE INTENDED APPLICATION ARE MET. CO PYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YE A
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
1:1
-
PVA1-47
551914 21.06.2021
PVPLUS F2 DS47 GENERAL DRAWING
Material
21,0 kg
TB553145
RM414145
ECO-0368996
21.06.2021
MM
A
B
27
47
D
F
E
G
8
4
.
8
ØC
198
Variation with thru drive
THIRD ANGLE PROJECTION
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G Remark
A 82.55 8 - - - 106 M10 SAE A 2-Bolt
B 101.6 10.5 127 89.8 M12 - - SAE B 4-Bolt
J 100 10.5 125 88.4 M10 - - 4-Bolt
52
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISE D THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AN D PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN A NALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKE R. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL R IGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,3 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
THIRD ANGLE PROJECTION
248max
227
1
6
0
160
9
7
130max
2
5
5
1
1
2
.
5
3
2
k
6
1
2
5
h
8
36.5
16.5
68
138
197
5
0
1
7
6
0
7
1
3
5
-
0
.
2
5
14
.
5
114
12.5
1
1
4
Key;
10 x 8 x 56
DIN6885
Thread;
M10
22 deep
Interface for power pilot cartridge
or CIP Sensor for displacement feedback
Gage port M; M14x1,5; ISO 6149-1
Drain po
rt L2 and L3 (opposite);
G3/4" (t
hread options 1)
optional
M27x2: ISO6149-1
(thread o
ptions 8)
or 1 1/16
- 12 UNF
( thread options 3)
Drain port L1;
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thread options 3)
Bearing flushing p
ort L4;
G1/4" (thread opti
ons 1)
optional M12 x 1,5;
ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
9
9
PV032 - 046, metric version
185
PV032-046, metric version
Mounting optional L
splined shaft W32x1.5x20x8f
DIN 5480
Shown is a clockwise rotating pump with standard pressure
compensator. Counter clockwise rotating pumps have inlet,
outlet and gage port reversed.
68
10
9
16
227
max 248
Ø125
h8
Ø125
h8
Ø32
k6
149
138
185
197
71
60
50
17
99
160
14
97
160
max 130
47
PVCMMCN Serie 45
Code AM 350bar
23.5
INLET for metric and SAE version:
flange acc. ISO 6162
DN38; PN200
4 x M12, 18 deep
optional 1/2"-13 UNC-2B
(thread options 3)
57.2
27.8
69.9
35.7
OUTLET for metric and SAE version:
flange acc. ISO 6162
DN25; PN400
4 x M12, 18 deep
optional 7/16"-14 UNC-2B
(thread options 3)
68
10
9
16
227
max 248
Ø125
h8
Ø125
h8
Ø32
k6
149
138
185
197
71
60
50
17
99
160
14
97
160
max 130
47
PVCMMCN Serie 45
Code AM 350bar
The pump shown above has
Mounting option K and
through drive variation T
(prepared for through drive)
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
Drain ports
L2 and L3
(opposite);
G3/4"
optional M27 x 2: ISO 6149-1
(thread options 8) or 1 1/16" - 12 UNF (thread option 3)
Key
10 x 8 x 56
DIN 6885
Thread M10,
22 deep
Bearing flushing port L4;
G1/4" (thread options 1)
optional M12 x 1.5; ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTH ER THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVIS ED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEM S OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJ URY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION O F PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS O F THE INTENDED APPLICATION ARE MET. COPYRIGHT P ARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,3 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
THIRD ANGLE PROJECTION
248max
227
1
6
0
160
9
7
130max
2
5
5
1
1
2
.
5
3
2
k
6
1
2
5
h
8
36.5
16.5
68
138
197
5
0
1
7
6
0
7
1
3
5
-
0
.
2
5
14
.
5
114
12.5
1
1
4
Key;
10 x 8 x 56
DIN6885
Thread;
M10
22 deep
Interface for power pilot cartridge
o
r CIP Sensor for displacement feedback
Gage port M; M14x1,5; ISO 6149-1
Drain port L2 and L3 (opposite);
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thread options 3)
Drain port L1;
G3/4" (thread options 1)
optional M27x2:
ISO6149-1
(thread options 8
)
or 1 1/16 - 12 U
NF
( thread options
3)
Bearing flushing port L4;
G1/4" (thread options 1)
optional M12 x 1,5; ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
9
9
PV032 - 046, metric version
185
Interface for power pilot cartridge
or CIP Sensor for
displacement feedback
Drain port L1; G3/4" optional M27 x 2;
ISO 6149-1 (thread options 8)
or 1 1/16"-12 UNF (thread option 3)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AN D PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN A NALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF T HE INTENDED APPLICATION ARE MET. COPYRIGHT PARKE R. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIG HTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,3 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
THIRD ANGLE PROJECTION
248max
227
1
6
0
160
9
7
130max
2
5
5
1
1
2
.
5
3
2
k
6
1
2
5
h
8
36.5
16.5
68
138
197
5
0
1
7
6
0
7
1
3
5
-
0
.
2
5
14
.
5
114
12.5
1
1
4
Key;
10 x 8 x 56
DIN6885
Thread;
M10
22 deep
Interface for power pilot cartridge
or CIP Sensor for displacement feedback
Gage port M; M14x1,5; ISO 6149-1
Drain port L2 and L3 (opposite);
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thread options 3)
Drain port L1;
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thr
ead options 3)
Bearing flushing port L4;
G1/4" (thread options 1)
optional M12 x 1,5; ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
9
9
PV032 - 046, metric version
185
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AN D PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN A NALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF T HE INTENDED APPLICATION ARE MET. COPYRIGHT PARKE R. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIG HTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,3 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
THIRD ANGLE PROJECTION
248max
227
1
6
0
160
9
7
130max
2
5
5
1
1
2
.
5
3
2
k
6
1
2
5
h
8
36.5
16.5
68
138
197
5
0
1
7
6
0
7
1
3
5
-
0
.
2
5
14
.
5
114
12.5
1
1
4
Key;
10 x 8 x 56
DIN6885
Thread;
M10
22 deep
Interface for power pilot cartridge
or CIP Sensor for displacement feedback
Gage port M; M14x1,5; ISO 6149-1
Drain port L2 and L3 (opposite);
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thread options 3)
Drain port L1;
G3/4" (thread options 1)
optional M27x2: ISO6149-1
(thread options 8)
or 1 1/16 - 12 UNF
( thread option
s 3)
Bearing flushing port L4;
G1/4" (thread options 1)
optional M12 x 1,5; ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
9
9
PV032 - 046, metric version
185
Thread for transport:
M8x1.25; 13 deep
PUMP DIMENSIONS
53
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
DETAIL A (2 : 1)
A
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISE D THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT AL L PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARK ER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL R IGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,6 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
1
4
.
5
1
1
4
114
1
2
7
-
0
.
0
5
3
1
.
7
5
-
0
.
0
5
Ø
3
5
.
2
0
.
1
3
12.6
68
8 60
57
8
12.6
Key; 7.94 x 7,94
56 long
Thread;
3/8 "-16 UNC-2B
22 deep
PV032 - 046, SAE version
Shown above is
Mounting option D
THIRD ANGLE PROJECTION
At threads options 3 and 7 the dimensions E and G
are UNC - 2B threads.
Variation with through drive
PV032-046, SAE version
Mounting option E
Splined shaft 14T-12/24 DP,
flat root, side fit ANSI B92.1
Ø127
-0.05
56
34
8
60
68
14
8
DETAIL A (2 : 1)
A
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISE D THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT AL L PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARK ER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL R IGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
33,6 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
1
4
.
5
1
1
4
114
1
2
7
-
0
.
0
5
3
1
.
7
5
-
0
.
0
5
Ø
3
5
.
2
0
.
1
3
12.6
68
8 60
57
8
12.6
Key; 7.94 x 7,94
56 long
Thread;
3/8 "-16 UNC-2B
22 deep
PV032 - 046, SAE version
Shown above is
Mounting option D
THIRD ANGLE PROJECTION
Shown above is
Mounting option D
Thread:
3/8"-16 UNC-2B
22 deep
Key:
7.94 x 7.94
56 long
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PAR KER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PA RKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISE D THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PA RKER SYSTEM AND COMPONENTS AND ASSURING THAT AL L PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARK ER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL R IGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
37,1 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
227
L
B
H
K
Ø
A
D
F
ØC
E
G
Variation with thru drive
THIRD ANGLE PROJECTION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARK ER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE OTHE R THAN CONDUCTING BUSINESS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUSE DEATH, PERSONAL INJURY AN D PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THROUGH ITS OWN A NALYSIS AND TESTING FOR THE FINAL SELECTION OF PARK ER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQUIREMENTS OF T HE INTENDED APPLICATION ARE MET. COPYRIGHT PARKE R. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIG HTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
2:3
-
PVA2-47
551914 16.06.2021
PVPLUS FS2 DS47 GENERAL DRAWING
Material
37,1 kg
TB553145
RM414145
ECO-0368997
21.06.2021
MM
227
L
B
H
K
Ø
A
D
F
Ø
C
E
G
Variation with thru drive
THIRD ANGLE PROJECTION
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G H K L Remark
A 82.55 8 - - - 106 M10 34 48 261 SAE A 2-Bolt
B 101.6 11 127 89.8 M12 146 M12 34 48 261 SAE B 2/4-Bolt
C 127 13.5 162 114.6 M12 - - 49 63 276 SAE C 4-Bolt
J 100 10.5 125 88.4 M10 140 M12 34 48 261 2/4-Bolt
K 125 10.5 160 113.1 M12 - - 34 48 261 4-Bolt
54
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
PV 063-092, metric version
Mounting interface for horse power
pilot or CIP for
displacement feedback
Drain ports L1, L2 and L3; G3/4"
optional M27 x 2; ISO 6149-1
(tread option 8) or 1 1/16" - 12 UNF
(tread option 3)
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
4 x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread options 3)
4 x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread options 3)
or 4 x M14, 20 deep
(thread options 4)
INLET for metric and SAE
version:
flange according ISO 6162
DN 51; PN 200 bar
OUTLET for metric and SAE
version:
flange according ISO 6162
DN 32; PN 400 bar
77.8
66.6
42.9
31.8
187.5
43.5
Max. 308
Max. 133
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
Key 12 x 8 x 80
DIN 6885
Thread
M12 - 28 deep
43
-0.25
Shown is a clockwise rotating pump with standard pressure
compensator. Counter clockwise rotating pumps have inlet,
outlet and gage port reversed.
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
The pump shown above has
Mounting option K
and through drive variation T
(prepared for through drive)
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
Mounting option L,
splined shaft
W40 x 1.5 x 25 x 8f DIN 5480
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
13.5
Thread for eye bolt:
M10x1.5; 17 deep
Bearing flushing port L4;
G1/4" (thread options 1)
optional M12 x 1.5; ISO 6149-1
(thread options 8)
or 7/16" - 20 UNF
(thread options 3)
PUMP DIMENSIONS
55
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
PV 063-092 SAE Version
8
82
90
75
287
(L)
K
B
A
D
F
G
E
C
45
H
Output: splined shaft
W32x1.5x20x8f DIN 5480
Variation with through drive
Mounting option E
splined shaft 13T-8/16 DP,
flat root, side fit ANSI B92.1
Shown above is
Mounting option D
Ø152.4
-0.05
Key: 11.11x11.11
80 long
Thread
1/2"-13 UNC-2B
28 deep
Ø152.4
-0.05
Ø44.45
-0.05
49.3
-0.05
12.6
8
82
90
75
287
(L)
K
B
A
D
F
G
E
C
45
H
8
82
90
75
287
(L)
K
B
A
D
F
G
E
C
45
H
20.6
80.8
80.8
161.6
161.6
8
82
90
75
287
(L)
K
B
A
D
F
G
E
C
45
H
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G H K L Remark
A 82.55 8 - - - 106 M10 39 58 326 SAE A 2-Bolt
B 101.6 11 127 89.8 M12 146 M12 39 58 326 SAE B 2/4-Bolt
C 127 13.5 162 114.6 M12 181 M16 39 58 326 SAE C 2/4-Bolt
D 152.4 13.5 228.5 161.6 M16 - - 64 83 351 SAE D 4-Bolt
J 100 10.5 125 88.4 M10 140 M12 39 58 326 2/4-Bolt
K 125 10.5 160 113.1 M12 180 M16 39 58 326 2/4-Bolt
L 160 13.5 200 141.4 M16 - - 39 58 326 4-Bolt
56
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
A A
B B
C C
D D
E E
F F
G G
H H
THIS DOCUMENT AND THE INFORMATION IT CONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIF IN CORPORATION AND ITS AFFILIATES ("PARK ER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR A NY PURPOSE OTHER THAN CONDUCTING BUS INESS WITH PARKER, AND MUST BE RETURN ED OR DESTROYED AND ALL FURTHER USE D ISCONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DO CUMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE O F PARKER SYSTEMS OR COMPONENTS CAN CA USE DEATH, PERSONAL INJURY AND PROPER TY DAMAGE, AND IS
SOLELY RESPONSIBLE T HROUGH ITS OWN ANALYSIS AND TESTING F OR THE FINAL SELECTION OF PARKER SYSTE M AND COMPONENTS AND ASSURING THAT A LL PERFORMANCE, ENDURANCE, MAINTENANC E,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICA TION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON TH IS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
350
386Max.
2
0
0
M
ounting interface for horse power pilot or
CI
P-Sensor for displacement feedback
Drain ports L1, L2 and L3; G1"
(thread option 1)
optional M33x2; ISO 6149-1
(thread option 8)
or 1 5/16" - 12 UNF
(thread option 3)
Bearing flushing port L4; G1/4"
(thread option 1)
optional M12x1,5; ISO 6149-1
(thread option 8)
or 7/16" - 20 UNF
(thread option 3)
1
0
6
1
0
5
283
295
15.4
9
9
1
4
6
37
8
5
219
2
0
3
.
5
1
4
5
200
Max. 133
1
5
8
1
8
1
6
0
h
8
(
-
0
.
0
6
3
)
2
0
0
4
5
°
4
5
°
Flange according DIN ISO 3019-2 Metric
for mounting interface code K and L
PV140 - 180 Metric
200
Gage port M; ISO6149-1-M14x1,5
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
A A
B B
C C
D D
E E
F F
G G
H H
THIS DOCUMENT AND TH E INFORMATION IT CONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKE R"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR A NY PURPOSE OTHER THAN CONDUCTING BUS INESS WITH PARKER, AND MUST BE RETURNE D OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOC UMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAU SE DEATH, PERSONAL INJURY AND PROPERT Y DAMAGE, AND IS
SOLELY RESPONSIBLE TH ROUGH ITS OWN ANALYSIS AND TESTING F OR THE FINAL SELECTION OF PARKER SYSTE M AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE ,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICAT ION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
350
386Max.
2
0
0
Mounting interface for horse power pilot or
CIP-Sensor for displacement feedback
Drain ports L1, L2 and L3; G1"
(thread option 1)
optional M33x2; ISO 6149-1
(thread option 8)
or 1 5/16" - 12 UNF
(thread option 3)
Bearing flushing port L4; G1/4"
(thread option 1)
optional M12x1,5; ISO 6149-1
(thread option 8)
or 7/16" - 20 UNF
(thread option 3)
1
0
6
1
0
5
283
295
15.4
9
9
1
4
6
37
8
5
219
2
0
3
.
5
1
4
5
200
Max. 133
1
5
8
1
8
1
6
0
h
8
(
-
0
.
0
6
3
)
2
0
0
4
5
°
4
5
°
Flange according DIN ISO 3019-2 Metric
for mounting interface code K and L
PV140 - 180 Metric
200
Gage port M; ISO6149-1-M14x1,5
Drain ports L1, L2 and L3; G1"
optional M33 x 2; ISO 6149-1
(tread option 8)
or 1 5/16" - 12 UNF
(tread option 3)
PV 140-180, metric version
4 x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread options 3)
INLET for metric and
SAE version:
flange according ISO 6162
DN 64; PN 160 bar
4 x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread options 3)
or 4 x M14, 22 deep
(thread options 4)
OUTLET for metric and
SAE version:
flange according ISO 6162
DN 32; PN 400 bar
Flange according DIN ISO
3019-2 metric for mounting
interface code K and L
9.3
8
8
.
9
0
.
2
5
50.8
0.25
6
3
6
6
.
6
0
.
2
5
31.8
0.25
3
2
Mounting interface for horse power
pilot or CIP for displacement
feedback
236
252
32
50
178
132120
196
Ø160
h8
Ø40 k6
200
92
9
20
287
86
78
64
26
56
Ø160 h8
18
Ø200
121
30
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
A A
B B
C C
D D
E E
F F
G G
H H
THIS DOCUMENT AND TH E INFORMATION IT CONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKE R"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR A NY PURPOSE OTHER THAN CONDUCTING BUS INESS WITH PARKER, AND MUST BE RETURNE D OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOC UMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAU SE DEATH, PERSONAL INJURY AND PROPERT Y DAMAGE, AND IS
SOLELY RESPONSIBLE TH ROUGH ITS OWN ANALYSIS AND TESTING F OR THE FINAL SELECTION OF PARKER SYSTE M AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE ,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICAT ION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
350
386Max.
2
0
0
Mounting interface for horse power pilot or
CIP-Sensor for displacement feedback
Drain ports L1, L2 and L3; G1"
(thread option 1)
optional M33x2; ISO 6149-1
(thread option 8)
or 1 5/16" - 12 UNF
(thread option 3)
Bearing flushing port L4; G1/4"
(thread option 1)
optional M12x1,5; ISO 6149-1
(thread option 8)
or 7/16" - 20 UNF
(thread option 3)
1
0
6
1
0
5
283
295
15.4
9
9
1
4
6
37
8
5
219
2
0
3
.
5
1
4
5
200
Max. 133
1
5
8
1
8
1
6
0
h
8
(
-
0
.
0
6
3
)
2
0
0
4
5
°
4
5
°
Flange according DIN ISO 3019-2 Metric
for mounting interface code K and L
PV140 - 180 Metric
200
Gage port M; ISO6149-1-M14x1,5
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
A A
B B
C C
D D
E E
F F
G G
H H
THIS DOCUMENT AND TH E INFORMATION IT CONTAINS IS CONFIDEN TIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION AND ITS AFFILIATES ("PARKE R"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR A NY PURPOSE OTHER THAN CONDUCTING BUS INESS WITH PARKER, AND MUST BE RETURNE D OR DESTROYED AND ALL FURTHER USE DIS CONTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOC UMENT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAU SE DEATH, PERSONAL INJURY AND PROPERT Y DAMAGE, AND IS
SOLELY RESPONSIBLE TH ROUGH ITS OWN ANALYSIS AND TESTING F OR THE FINAL SELECTION OF PARKER SYSTE M AND COMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE ,
SAFETY AND WARNING REQUIREMENTS OF THE INTENDED APPLICAT ION ARE MET. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
2
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
350
386Max.
2
0
0
Mounting interface for horse power pilot or
CIP-Sensor for displacement feedback
Drain ports L1, L2 and L3; G1"
(thread option 1)
optional M33x2; ISO 6149-1
(thread option 8)
or 1 5/16" - 12 UNF
(thread option 3)
Bearing flushing port L4; G1/4"
(thread option 1)
optional M12x1,5; ISO 6149-1
(thread option 8)
or 7/16" - 20 UNF
(thread option 3)
1
0
6
1
0
5
283
295
15.4
9
9
1
4
6
37
8
5
219
2
0
3
.
5
1
4
5
200
Max. 133
1
5
8
1
8
1
6
0
h
8
(
-
0
.
0
6
3
)
2
0
0
4
5
°
4
5
°
Flange according DIN ISO 3019-2 Metric
for mounting interface code K and L
PV140 - 180 Metric
200
Gage port M; ISO6149-1-M14x1,5
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
Bearing flushing port
L4; G1/4",
optional M12 x 1.5;
ISO 6149-1 (tread option 8)
or 7/16" - 20 UNF (tread option 3)
Thread for transport:
M10x1.5; 18 deep
L1
L2
L3
295 pressure side
(305 suction side)
PUMP DIMENSIONS
57
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE I NFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN C ORPORATION AND ITS AFFILIATES ("PARKER") , MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY P URPOSE OTHER THAN CONDUCTING BUSINE SS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCO NTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUME NT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUS E DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THRO UGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PE RFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQ UIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COP YRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
-
TB553145
TB553145
MM
1
5
2
.
4
-
0
.
0
5
2
0
.
6
4
5°
161.6
1
6
1
.
6
45
°
Flange according DIN ISO 3019-1 SAE
for mounting interface code D, E, F and G
PV140 - 180 SAE Version
THIRD ANGLE PROJECTION
OUTLET for metric and
SAE version:
flange according ISO 6162
DN 32; PN 400 bar
PV 140-180 SAE Version
Variation with through drive
Flange according DIN ISO 3019-1 SAE
for mounting interface code D, E, F and G
Shown are clockwise rotating pumps. Counter clockwise
rotating pumps have inlet, outlet and gage port reversed.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE I NFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN C ORPORATION AND ITS AFFILIATES ("PARKER") , MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY P URPOSE OTHER THAN CONDUCTING BUSINE SS WITH PARKER, AND MUST BE RETURNED O R DESTROYED AND ALL FURTHER USE DISCO NTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUME NT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUS E DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THRO UGH ITS OWN ANALYSIS AND TESTING FOR THE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PE RFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQ UIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COP YRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
-
TB553145
TB553145
MM
1
5
2
.
4
-
0
.
0
5
2
0
.
6
4
5°
161.6
1
6
1
.
6
45
°
Flange according DIN ISO 3019-1 SAE
for mounting interface code D, E, F and G
PV140 - 180 SAE Version
THIRD ANGLE PROJECTION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE I NFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CO RPORATION AND ITS AFFILIATES ("PARKER") , MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY P URPOSE OTHER THAN CONDUCTING BUSINE SS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCO NTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUME NT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUS E DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THRO UGH ITS OWN ANALYSIS AND TESTING FOR T HE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PE RFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQ UIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COP YRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
350
65
97
B
A
E
G
219
C
F
D
D
Variation with thru drive
THIRD ANGLE PROJECTION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCUMENT AND THE I NFORMATION IT CONTAINS IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CO RPORATION AND ITS AFFILIATES ("PARKER"), MAY NOT BE COPIED OR DISCLOSED TO
OTHERS OR USED FOR ANY P URPOSE OTHER THAN CONDUCTING BUSINE SS WITH PARKER, AND MUST BE RETURNED OR DESTROYED AND ALL FURTHER USE DISCO NTINUED AT PARKER'S REQUEST. THE
RECIPIENT OF THIS DOCUME NT IS ADVISED THAT IMPROPER SELECT
ION OR IMPROPER USE OF PARKER SYSTEMS OR COMPONENTS CAN CAUS E DEATH, PERSONAL INJURY AND PROPERTY DAMAGE, AND IS
SOLELY RESPONSIBLE THRO UGH ITS OWN ANALYSIS AND TESTING FOR T HE FINAL SELECTION OF PARKER SYSTEM AND COMPONENTS AND ASSURING THAT ALL PE RFORMANCE, ENDURANCE, MAINTENANCE,
SAFETY AND WARNING REQ UIREMENTS OF THE INTENDED APPLICATION ARE MET. COPYRIGHT PARKER. YEAR OF COP YRIGHT IS THE YEA
R(S) INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO.
REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
4
6
OF
1:1
-
PVA4-47
RM414145
16.06.2021
PVPLUS FS4 DS47 GENERAL DRAWING
Material
95,6 kg
TB553145
TB553145
MM
350
65
97
B
A
E
G
219
C
F
D
D
Variation with thru drive
THIRD ANGLE PROJECTION
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G Remark
A 82.55 8 - - - 106 M10 SAE A 2-Bolt
B 101.6 11 127 89.8 M12 146 M12 SAE B 2/4-Bolt
C 127 13.5 162 114.6 M12 181 M16 SAE C 2/4-Bolt
D 152.4 13.5 228.5 161.6 M16 - - SAE D 4-Bolt
J 100 10.5 125 88.4 M10 140 M12 2/4-Bolt
K 125 10.5 160 113.1 M12 180 M16 2/4-Bolt
L 160 13.5 200 141.4 M16 - - 4-Bolt
58
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
PV 140-180 Mounting options
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND T HE INFORMAT ION IT CON TAINS IS CON FIDENTIAL AND PROP RIETARY T O PARKER-HANN IFIN CORPORATION AND ITS AFFI LIATES ("P ARKER"), MA Y NOT BE COP IED OR DISC LOSED TO
OTHERS OR USED FOR A NY PURPOS E OTHER THA N CONDUCTIN G BUSINES S WITH PAR KER, AND MUS T BE RETURN ED OR DES TROYED AND ALL FURTHE R USE DISCON TINUED AT P ARKER'S RE QUEST. THE
RECIPIENT OF THIS DOC UMENT IS A DVISED TH AT IMPROPER SELECT
ION OR IMPR OPER USE OF PARKER S YSTEMS OR C OMPONENTS CAN CAUSE D EATH, PERSO NAL INJURY AND PRO PERTY DAMA GE, AND IS
SOLELY R ESPONSIBLE T HROUGH ITS OWN ANALY SIS AND TEST ING FOR TH E FINAL SELE CTION OF P ARKER SYST EM AND COMP ONENTS AND ASSURING THAT ALL PER FORMANCE, ENDURANCE , MAINTENA NCE,
SAFETY AN D WARNING REQUIREME NTS OF THE INTENDED A PPLICATION ARE MET. COP YRIGHT PAR KER. YEAR OF COPYRIGH T IS THE YEA
R(S) INDIC ATED ON T HIS DOCUMEN T. ALL RIG HTS RESERVED .
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN
64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
Key 14 x 9 x 75
DIN 6889
Thread
M16 - 36
deep
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND T HE INFORMAT ION IT CON TAINS IS CON FIDENTIAL AND PROP RIETARY T O PARKER-HANN IFIN CORPORATION AND ITS AFFI LIATES ("P ARKER"), MA Y NOT BE COP IED OR DISC LOSED TO
OTHERS OR USED FOR A NY PURPOS E OTHER THA N CONDUCTIN G BUSINES S WITH PAR KER, AND MUS T BE RETURN ED OR DES TROYED AND ALL FURTHE R USE DISCON TINUED AT P ARKER'S RE QUEST. THE
RECIPIENT OF THIS DOC UMENT IS A DVISED TH AT IMPROPER SELECT
ION OR IMPR OPER USE OF PARKER S YSTEMS OR C OMPONENTS CAN CAUSE D EATH, PERSO NAL INJURY AND PRO PERTY DAMA GE, AND IS
SOLELY R ESPONSIBLE T HROUGH ITS OWN ANALY SIS AND TEST ING FOR TH E FINAL SELE CTION OF P ARKER SYST EM AND COMP ONENTS AND ASSURING THAT ALL PER FORMANCE, ENDURANCE , MAINTENA NCE,
SAFETY AN D WARNING REQUIREME NTS OF THE INTENDED A PPLICATION ARE MET. COP YRIGHT PAR KER. YEAR OF COPYRIGH T IS THE YEA
R(S) INDIC ATED ON T HIS DOCUMEN T. ALL RIG HTS RESERVED .
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
Key 12.7 x 12.7 x 75
Thread 5/8-11
UNC - 36 deep
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND T HE INFORMAT ION IT CON TAINS IS CON FIDENTIAL AND PROP RIETARY T O PARKER-HANN IFIN CORPORATION AND ITS AFFI LIATES ("P ARKER"), MA Y NOT BE COP IED OR DISC LOSED TO
OTHERS OR USED FOR A NY PURPOS E OTHER THA N CONDUCTIN G BUSINES S WITH PAR KER, AND MUS T BE RETURN ED OR DES TROYED AND ALL FURTHE R USE DISCON TINUED AT P ARKER'S RE QUEST. THE
RECIPIENT OF THIS DOC UMENT IS A DVISED TH AT IMPROPER SELECT
ION OR IMPR OPER USE OF PARKER S YSTEMS OR C OMPONENTS CAN CAUSE D EATH, PERSO NAL INJURY AND PRO PERTY DAMA GE, AND IS
SOLELY R ESPONSIBLE T HROUGH ITS OWN ANALY SIS AND TEST ING FOR TH E FINAL SELE CTION OF P ARKER SYST EM AND COMP ONENTS AND ASSURING THAT ALL PER FORMANCE, ENDURANCE , MAINTENA NCE,
SAFETY AN D WARNING REQUIREME NTS OF THE INTENDED A PPLICATION ARE MET. COP YRIGHT PAR KER. YEAR OF COPYRIGH T IS THE YEA
R(S) INDIC ATED ON T HIS DOCUMEN T. ALL RIG HTS RESERVED .
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
Key 11.11 x 11.11 x 55
Thread 5/8-11
UNC - 36 deep
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND THE INFOR MATION IT CON TAINS IS CONFIDENTIA L AND PROP RIETARY TO PARKER-HA NNIFIN CORP ORATION AN D ITS AFFIL IATES ("PARK ER"), MAY NOT BE COPI ED OR DISCL OSED TO
OTHERS OR USED FOR ANY PURPO SE OTHER TH AN CONDU CTING BUSIN ESS WITH PAR KER, AND MUST BE RET URNED OR DESTROYED A ND ALL FURT HER USE D ISCONTINUED AT PARKER 'S REQUES T. THE
RECIPIENT OF THIS D OCUMENT IS ADVISED TH AT IMPROPE R SELECT
ION OR IMPR OPER USE OF PARKER S YSTEMS OR COMPONENT S CAN CAUSE DEATH, P ERSONAL INJU RY AND PRO PERTY DAMA GE, AND IS
SOLELY R ESPONSIBLE T HROUGH IT S OWN ANAL YSIS AND TE STING FOR THE FINAL SE LECTION O F PARKER SY STEM AND C OMPONENTS AND ASSUR ING THAT AL L PERFORM ANCE, ENDURA NCE, MAIN TENANCE,
SAFETY AN D WARNING REQUIREM ENTS OF TH E INTENDED APPLICATION ARE MET. COPYRIGHT PA RKER. YEA R OF COPYR IGHT IS THE YEA
R(S) INDIC ATED ON T HIS DOCUMEN T. ALL RIG HTS RESERV ED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND THE INFOR MATION IT CO NTAINS IS CONFIDENT IAL AND PR OPRIETARY T O PARKER-H ANNIFIN C ORPORATION AND ITS A FFILIATES (" PARKER"), M AY NOT BE COPIED OR D ISCLOSED TO
OTHERS OR USED FOR ANY PURPO SE OTHER THAN COND UCTING BUSIN ESS WITH PARKER, AN D MUST BE R ETURNED O R DESTROY ED AND ALL FURTHER USE DISCONTIN UED AT PAR KER'S REQUES T. THE
RECIPIENT OF THIS D OCUMENT IS ADVISED TH AT IMPROPE R SELECT
ION OR IMPR OPER USE OF PARKER SYSTEMS O R COMPONENT S CAN CAUS E DEATH, PERSONAL I NJURY AND P ROPERTY D AMAGE, AND IS
SOLELY R ESPONSIBLE T HROUGH IT S OWN ANAL YSIS AND TESTING FOR THE FINA L SELECTION OF PARKER SYSTEM AN D COMPONENT S AND ASS URING THA T ALL PERFOR MANCE, E NDURANCE, M AINTENANCE ,
SAFETY AN D WARNING REQUIREM ENTS OF TH E INTENDED APPLICATIO N ARE MET. COPYRIGHT PARKER. Y EAR OF COP YRIGHT IS T HE YEA
R(S) INDIC ATED ON T HIS DOCUME NT. ALL RIG HTS RESER VED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
THIS DOCU MENT AND THE INFOR MATION IT CO NTAINS IS CONFIDENT IAL AND PR OPRIETARY T O PARKER-H ANNIFIN C ORPORATION AND ITS A FFILIATES (" PARKER"), M AY NOT BE COPIED OR D ISCLOSED TO
OTHERS OR USED FOR ANY PURPO SE OTHER THAN COND UCTING BUSIN ESS WITH PARKER, AN D MUST BE R ETURNED O R DESTROY ED AND ALL FURTHER USE DISCONTIN UED AT PAR KER'S REQUES T. THE
RECIPIENT OF THIS D OCUMENT IS ADVISED TH AT IMPROPE R SELECT
ION OR IMPR OPER USE OF PARKER SYSTEMS O R COMPONENT S CAN CAUS E DEATH, PERSONAL I NJURY AND P ROPERTY D AMAGE, AND IS
SOLELY R ESPONSIBLE T HROUGH IT S OWN ANAL YSIS AND TESTING FOR THE FINA L SELECTION OF PARKER SYSTEM AN D COMPONENT S AND ASS URING THA T ALL PERFOR MANCE, E NDURANCE, M AINTENANCE ,
SAFETY AN D WARNING REQUIREM ENTS OF TH E INTENDED APPLICATIO N ARE MET. COPYRIGHT PARKER. Y EAR OF COP YRIGHT IS T HE YEA
R(S) INDIC ATED ON T HIS DOCUME NT. ALL RIG HTS RESER VED.
DESCRIPTION
ECO
ECO DATE
DATEDRAWN BY
CHECKED BY
MASS
APPROVED BY
SHEET
UNITS
SCALE
DRAWING NO. REV.
PARKER HANNIFIN CORPORATION
PUMP AND MOTOR DIVISION EUROPE
Neefestraße 96 Chemnitz 09116
3 3
OF
1:2
-
PV_BG4_KS45_GEN
RM414145 10.01.2020
PVPLUS FS4 DS45 GENERAL DRAWING
Material
82.9 kg
TB553145
TB553145
MM
THIRD ANGLE PROJECTION
Mounting option K
shaft key metric
Mounting option D
shaft key SAE
Mounting option F
shaft key SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
5
0
k
6
(
+
0
.
0
0
2
0
.
0
1
8
+
)
5
3
.
5
-
0
.
2
5
92
1
6
0
h
8
(
-
0
.
0
6
3
)
Key 14 x 9 x 75
DIN 6889
splined shaft W50 x 2 x 24 x 9g
DIN 5480
1
6
0
h
8
(
-
0
.
0
6
3
)
46
78
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
1
5
2
.
4
-
0
.
0
5
5
0
.
8
-
0
.
0
5
5
6
.
4
0
.
1
3
99.7
91.4
12.3
8.3
Key 12.7 x 12.7 x 75
75
4
4
.
4
5
-
0
.
0
5
4
9
.
2
9
0
.
1
3
Key 11.11 x 11.11 x 55
67
52.5
80
88
40
67
75
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Inlet for metric and SAE
version:
flange according ISO 6162
DN64; PN 160bar
Outlet for metric and SAE
version:
flange according ISO 6162
DN32; PN 400bar
8
8
.
9
0
.
2
5
50.8
0.25
6
6
.
6
0
.
2
5
31.8
0.25
3
2
6
3
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
(thread option 3)
4x M12, 20 deep
optional 1/2" - 13 UNC - 2B
( thread option 3)
or
4x M14, 22 deep
( thread option 4)
10
9
Thread
M16 - 36 deep
Thread
5/8-11 UNC - 36 deep
Thread
5/-11 UNC - 36 deep
splined shaft W50 x 2 x 24 x 9 g
DIN 5480
splined shaft 15T-8/16 DP
flat root side fit ANSI B92.1
splined shaft 13T-8/16 DP
flat root side fit ANSI B92.1
Mounting option K
shaft keyed metric
Mounting option D
shaft keyed SAE
Mounting option F
shaft keyed SAE
Mounting option L
shaft splined metric
Mounting option E
shaft splined SAE
Mounting option G
shaft splined SAE
91.5
99.5
PUMP DIMENSIONS
59
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
472.5
Max 510
36.5
79.3
250
265
176
184
230
60
9
10
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
PV 270, metric version
Mounting interface for horse power pilot
or CIP for displacement feedback
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
The pump shown above has
Mounting option K
and through drive variation T
(prepared for through drive)
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
Key 18 x 11 x 98
DIN 6885
Thread
M20 - 42 deep
Bearing flushing port L4;
G1/4", optional M12 x 1.5;
ISO 6149-1 (tread option 8)
or 7/16" - 20 UNF
(tread option 3)
4 x M16, 30 deep
optional 5/8" - 11 UNC - 2B
(thread options 3)
OUTLET for metric and
SAE version:
flange according ISO 6162
DN 38; PN 400 bar
4 x M16, 30 deep
optional 5/8" - 11 UNC - 2B
(thread options 3)
INLET for metric and SAE version:
flange according ISO 6162
DN 89; PN 35 bar
250
265
176
184
230
60
9
10
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
120.7
69.9
Shown is a clockwise rotating pump with standard pressure
control. Counter clockwise rotating pump have inlet, outlet
and gage port reversed.
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
Mounting option L,
splined shaft
W60 x 2 x 28 x 9g DIN 5480
250
265
176
184
230
60
9
10
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
Drain ports L1, L2 and L3; G1 1/4"
optional M42 x 2; ISO 6149-1
(tread option 8)
or 1 5/8" - 12 UNF
(tread option 3)
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
25
Thread for transport:
M12x1.75; 21 deep
L1
L2
L3
PUMP DIMENSIONS
60
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Variation with through drive
PV 270 SAE Version
8
88
C
D
F
E
G
A
B
98
59
Output: splined shaft
W50x 2 x 24 x 9 g
DIN 5480
112.25
224.5
112.25
224.5
Ø20.5
8
88
C
D
F
E
G
A
B
98
59
Mounting option E
splined shaft 15T-8/16 DP,
flat root, side fit ANSI B92.1
51.5
Ø165.1
-0.05
8
88
C
D
F
E
G
A
B
98
59
472.5
(531.5)
8
88
C
D
F
E
G
A
B
98
59
8
88
C
D
F
E
G
A
B
98
59
Key: 12.7x12.7
75 long
89.5
15.9
97.5
Ø50.8
-0.05
56.4 ±0.13
Ø165.1
-0.05
Shown above is
Mounting option D
Thread 5/8"-11
UNC-2B 25 deep
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G Remark
A 82.55 8 - - - 106 M10 SAE A 2-Bolt
B 101.6 11 127 89.8 M12 146 M12 SAE B 2/4-Bolt
C 127 13.5 162 114.6 M12 181 M16 SAE C 2/4-Bolt
D 152.4 13.5 228.5 161.6 M16 229 M16 SAE D 2/4-Bolt
E 165.1 17 317.5 224.5 M20 - - SAE E 4-Bolt
J 100 10.5 125 88.4 M10 140 M12 2/4-Bolt
K 125 10.5 160 113.1 M12 180 M16 2/4-Bolt
L 160 13.5 200 141.4 M16 224 M20 2/4-Bolt
M 200 13.5 250 176.8 M20 - - 4-Bolt
61
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
477
250
max. 13 3
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
max 514.5
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 13 3
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
PV 360, metric version
Mounting interface for horse
power pilot or CIP for
displacement feedback
The pump shown above has Mounting
option K and through drive variation
T (prepared for through drive)
Drain ports L1, L2 and L3; G1 1/4"
optional 1 5/8" - 12 UNF
(thread option 3)
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 133
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
4 x M16, 30 deep
optional 5/8" - 11 UNC - 2B
(thread option 3)
4 x M16, 30 deep
optional 5/8" - 11 UNC - 2B
(thread option 3)
INLET for metric and
SAE version:
flange according ISO 6162
DN 102; PN 35 bar 4"
OUTLET for metric and
SAE version:
flange according ISO 6162
DN 38; PN 400 bar 1 1/2"
79.3
36.5
77.8
130.2
Shown is a clockwise rotating pump with standard pressure control.
Counter clockwise rotating pump have inlet, outlet and gage port reversed.
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 13 3
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
mounting option R
pilot diameter Ø224 mm
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 13 3
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
Key 20 x 12 x 100
DIN 6885
Thread
M20 - 42 deep
Bearing flushing
port L4; G1/4",
optional 7/16" - 20 UNF
(thread option 3)
74.5
-0.25
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 13 3
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
Ø70
m7
Ø250
h8
265
230
184
176
25
60
L2
L3
L1
9
115
9
10
477
250
max. 133
128
117
100
294
377
408
38
102
173
2
6
315
24
280
224
h8
Ø250
h8
(L)
Ø224
h8
(T)
80
46
90
Mounting option L, T,
splined shaft
W 70 x 3 x 22 x 8f DIN 5480
resp.
Thread
M20 - 42 deep
Gage port M; ISO 6149-1 M14x1.5
(for any thread option)
250
265
176
184
230
60
25
115
Ø65 k6
Ø200 h8
294
378
403
128
110100
173
135
22
Ø250
80
200
38
88
46
30
Thread for transport:
M12x1.75; 21 deep
PUMP DIMENSIONS
62
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
PV 360 SAE Version
92
100
21
10
90
46
A
D
D
F
G
E
C
A
B
59
101
477
(536)
Key:
19.05x19.05
88.9 long
78
-0.25
Ø69.85
-0.05
Ø165.1
-0.05
Thread 5/8"-11
UNC-2B 36 deep
Note:
The dimensions shown conform
to ISO 3019/1 the actual hole
dimensions conform to ISO
3019/2 (pitch Ø315, hole Ø26,
see previous page) and cover ISO
3019/1 dimensions as well. Use
washers when assembling pump.
92
100
21
10
90
46
A
D
D
F
G
E
C
A
B
59
101
477
(536)
15.6
165.1
-0.05
Mounting option E
splined shaft W 70x3x22x8f,
DIN 5480
Shown above is
Mounting option D
Variation with through drive
112.25
112.25
224.5
224.5
92
100
21
10
90
46
A
D
D
F
G
E
C
A
B
59
101
477
(536)
Output:
splined shaft
W 50 x 2 x 24 x 9 g
DIN 5480
92
100
10
A
B
59
101
477
(536)
PUMP DIMENSIONS
Through drive adaptors are available with the following dimensions
Drawing
Dimension
Through
drive option
A B C D E F G Remark
A 82.55 8 - - - 106 M10 SAE A 2-Bolt
B 101.6 11 127 89.8 M12 146 M12 SAE B 2/4-Bolt
C 127 13.5 162 114.6 M12 181 M16 SAE C 2/4-Bolt
D 152.4 13.5 228.5 161.6 M16 229 M16 SAE D 2/4-Bolt
E 165.1 17 317.5 224.5 M20 - - SAE E 4-Bolt
J 100 10.5 125 88.4 M10 140 M12 2/4-Bolt
K 125 10.5 160 113.1 M12 180 M16 2/4-Bolt
L 160 13.5 200 141.4 M16 224 M20 2/4-Bolt
M 200 13.5 250 176.8 M20 - - 4-Bolt
63
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Dimensions standard pressure control, code ...MMC
Dimensions horse power pilot cartridge, displacement sensor
(Contactless Inductive Position)
Pump housing
37.5
43.4
max. 172
46
41
24
45
54
P
T
L
A
Pump axis
max. 172
46
41
24
45
54
P
T
L
A
Controls with
code ... MM1 have a
NG6 / Cetop 3
interface topside
(as shown below);
threads metric
Dimensions remote pressure and load sensing control, codes ...MR1, ...MF1
Pump axis
control ports G1/4"
(option 1 and 4)
optional 7/16-20 UNF
(option 3)
optional M12x1.5
(option 8)
69.5
43.4
Controls with code ...MRC and MFC have no topside
valve interface (as shown above)
max. 172
41
24
45
L
P
P
T
A
max. 172
41
24
45
L
P
P
T
A
max. 172
41
24
45
L
P
P
T
A
remote control port p
P
(code ...MRC, ...MR1) resp.
LS port p
F
(code ...MFC, ...MF1)
88.5
max. 172
41
24
45
L
P
P
T
A
Port,
ISO 6149-1-M14x1.5
Scews metric
88.5
max. 172
46
41
24
45
54
P
T
L
A
cable length = 230 mm
Connector M12x1 –
4-pin (5-pin compatible)
CONTROL DIMENSIONS
64
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
173
97
41
Dimensions for controls with unloading valve, codes ...M*W
Dimensions for controls with proportional pressure pilot valve, codes ...M*K
173
97
41
Pump axis
Pump axis
remote control port p
P
resp. LS port p
F
remote control port p
P
resp. LS port p
F
unloading valve:
D1VW002K*JW;
* for seals option
Shown in version MRW/MFW, version MMW has no remote control port.
pilot valve:
PVACREC...K35 for
codes ...M*K,
** for threads and
seals option
Shown in version MRK/MFK, version MMK has no remote control port.
Dimensions for horse power compensator *L* and *C* are identical to MM* respectively MF*.
All control ports G1/4"
optional 7/16-20 UNF
(option 3)
43.4
43.4
171
96
173
97
41
171
96
173
97
41
173
97
41
CONTROL DIMENSIONS
65
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
58
29
96
105
81
116
88
110
222
58
104
29
191
96
110
88
Pump axis
Pump axis
Dimensions two spool load sensing control, code ...MTZ, ...MTP
LS port p
F
LS port p
F
pressure pilot valve
PVAC1PC**S35
(code ...MTP only)
pressure control
stage
elbow manifold
elbow manifold
displacement
control stage
displacement
control stage
Dimensions two spool load sensing control with proportional pressure pilot valve,
code ...MTK
pilot valve:
PVACREM...K35 for code ...MTK,
** for threads- and seals soption
proportional
pressure pilot valve
pressure control
stage
80.5
58
10
4
29
191
96
110
88
58
29
96
10
5
81
116
88
110
222
Port,
ISO 6149-1-M14x1.5
Port,
ISO 6149-1-M14x1.5
All connecting scews metric
– All connecting scews metric
Shown version MTP
CONTROL DIMENSIONS
66
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
95
80
106
58
222
28
81
113
145
108
106
A
B
pump axis
Dimensions proportional p/Q-control, codes ...UDR, ...UDK, ...UDM
pilot valve:
PVACREM...K35 for code ...UDK, UDM
** for threads- and seals option
Dimensions proportional displacement control, code ...FDV
P
T
A
101,9
122,9
pump axis
56,7
81,7
46,0
A
B
pressure pilot valve
(codes ...UDK, ...UDM only)
pressure sensor
(code ...UDM only)
pressure
control stage
elbow manifold
displacement
control stage
95
80
106
58
222
28
81
113
145
108
106
A
B
P
T
A
101,9
122,9
pump axis
56,7
81,7
46,0
A
B
ISO 6149
M14x1.5
Port,
ISO 6149-1-M14x1.5
– All connecting scews metric
All connecting scews metric
CONTROL DIMENSIONS
67
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
SealsSecond
pump
Thread
PV
MK
Axial piston
pump series
PV
BG
SizeMounting
kit
PV
MK
Axial
piston pump
series PV
BG
SizeMounting
kit
Coupling
Mounting kits for multiple pumps, for second pump option
Mounting kits for multiple pumps, couplings
Kit contains positions 30, 69, 84, 85
and 87, see spare part list
Kit contains positions 1
(and 2 for keyed shaft).
K
1
2
SAE,
splined
keyed shaft
(only up to Ø18,
metric)
metric
splined
second pump
front pump
Availability of through drive flange and coupling please check with ordering code options per each pump size, starting at page 6
Code Second pump, SAE
T Prepared for through drive option (plugged)
A SAE A-2, diameter 82.55 mm
B SAE B-2/4, diameter 101.6 mm*
C SAE C-2/4, diameter 127,mm**
D SAE D-4, diameter 152.4 mm
E SAE E-4, diameter 165.1 mm
Second pump, metric
J Diameter 100 mm
K Diameter 125 mm
L Diameter 160 mm
M Diameter 200 mm
Code
Coupling for metric,
splined shaft DIN 5480
01 N25 x 1.5 x 15
02 N32 x 1.5 x 20
03 N40 x 1.5 x 25
04 N50 x 2 x 24
05 N60 x 2 x 28
06 N70 x 3 x 22*
Coupling for SAE splined
shaft
flat root, side fit
11 SAE A, 9T 16/32
12 SAE, 11T 16/32
13 SAE B, 13T 16/32
14 SAE B-B, 15T 16/32
15 SAE C, 14T 12/24
16 SAE C-C, 17T 12/24
17 SAE D+E, 13T 8/16
18 SAE F, 15T 8/16
Coupling + adaptor
for keyed shaft
20 Diameter 12 mm
21 Diameter 16 mm
22 Diameter 18 mm
* For PV360 only
Code Pump size
1 Pump size 1: PV016 – PV028
2 Pump size 2: PV032 – PV046
3 Pump size 3: PV063 – PV092
4 Pump size 4: PV140 – PV180
5 Pump size 5: PV270 – PV360
Code Pump size
1 Pump size 1: PV016 – PV028
2 Pump size 2: PV032 – PV046
3 Pump size 3: PV063 – PV092
4 Pump size 4: PV140 – PV180
5 Pump size 5: PV270 – PV360
Code Seals
N NBR
V FPM
Code Thread
M Metric
S SAE
THROUGH DRIVE MOUNTING KITS
* PV016-PV028 only available with SAE B - 4 bolt, diameter 101,6 mm
** PV032-PV046 only available with SAE C - 4 bolt, diameter 127 mm
68
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
L1
L2
L3
W1
W2
W3
L
P
Multiple Pump Combinations – Maximum Moment
Moment M = (L1
*
W1 + L2
*
W2 + L3
*
W3 +...)
Note: If the calculated moment M exceed the maximum moment in table 1 below, additional pump support is needed
Table 1: Maximum Moment and Pump Dimensions
Combinations of multiple pumps might require additional
pump support to avoid high stress on the front mounting
flange. Combinations of two PVplus pumps in the same
frame size generally do not need additional support in an
industrial application. For combinations of more pumps
support is required.
In case of combinations of a PVplus pump with another
type of pump it is recommended to calculate the moment
for the combination and compare with the maximum
moment in table 1 below.
2)
See page 6 to 17 for reference per each frame size.
1)
at dynamic weight acceleration 10g = 98.1 m/sec
2
Table 2 Through Drive Adapter Plate Thickness [mm]
THROUGH DRIVE 
FLANGE LOAD LIMITATION
PV016-PV028 PV032-PV046 PV063-PV092 PV140-PV180 PV270 PV360
Maximum moment
1)
[Nm] 81 151 401 591 1686 1686
Weight W [N] 186 294 589 883 1687 1766
Distance L1 [mm to C/G] 106 119 178 184 234 238
Distance Lp [mm] 197.5 227 287 350 472.5 477
Adapter option
2)
PV016-PV028 PV032-PV046 PV063-PV092 PV140-PV180 PV270 PV360
A 27 34 39 65 59 59
B 27 34 39 65 59 59
C - 49 39 65 59 59
D - - 64 65 59 59
E - - - - 59 59
G 27 34 39 - - -
J 27 34 39 65 59 59
K - 34 39 65 59 59
L - - 39 65 59 59
M - - - - 59 59
69
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
Important notice:
The max. allowable torque of the individual shaft must
not be exceeded. For 2-pump combinations there is no
problem because PV series oers 100 % through torque.
For 3-pump combinations (and more) the limit torque
could be reached or exceeded.
Therefore it is necessary to calculate the resulting input
as well as through drive torque.
* DIN5480 splined
THROUGH DRIVE 
SHAFT LOAD LIMITATIONS
Maximum allowed transferable torque FRONT
Shaft
code
Shaft
type
Transferable torque at FRONT shaft end. [Nm]
PV016-028 PV032-
046
PV063-
092
PV140-180 PV270 PV360
D SAE - Key 300 650 1850 2150 2150 4750
E SAE - Spline 320 630 1700 2750 2800 8100*
F SAE - Key 1200
G SAE - Spline 1700
R Metric - Key 3750
T Metric - Spline 8100
K Metric - Key 280 640 1200 1550 3300 3750
L Metric - Spline 320 720 1500 3050 5750 8100
Maximum allowed transferable torque REAR
Max. torque transmission
cap.
for rear mounted pump
350 520 1100 1550 3150 3250
70
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
NOTES
71
Hydraulic Pump & Motor EuropeMSG30-3245/UK - Axial Piston Pumps, Series PVplus
NOTES
www.parker.com
MSG30-3245/UK 12/2025
© 2025 Parker Hannifin EMEA Sarl. All Rights Reserved.