
Remote Controls – Hydraulic
PCL4
4
Catalogue HY17-8357/UK
Parker Hannifin
Mobile Controls Division Europe
Borås, Sweden
The PCL4 is a stackable hydraulic
control-pressure valve intended for the
proportional, hydraulic remote control of
directional valves, pumps with variable
displacement, positioning cylinders, etc. It
can be obtained with a co-ordinate lever
(joystick), linear lever or foot pedal as the
activating device.
Freedom in machine design
Good machine design is heavily
dependent on the availability of versa-
tile components and systems that can
be combined in different ways to give
optimum operating and control character-
istics. Parker control systems give you the
freedom to design your machines the way
you want them, since they enable compo-
nents such as directional valves and other
control devices to be located ideally on
the machine. This also gives advantages
in production, since it greatly facilitates
the building of machine sub-assemblies
at different sites prior to collation for final
assembly.
Parker supplies a wide range of
pneumatic, hydraulic and electric control
devices that enable optimum ergonomic
design of the machine-control station.
(Please see separate brochures for
information on our hydraulic and electric
remote-control systems.)
Safety
The robust and simple construction of the
PCL4 remote control valve makes it very
reliable and greatly facilitates training and
servicing. This, together with consistently
predictable control properties, gives a high
level of operational safety for many years.
Design
The valve is made up of sections, each
of which contains two 3-way pressure
reducing valves (one per signal port). Up
to 6 sections can be stacked into one
and the same valve to give a total of 12
signal ports. Valves with four signal ports
can be equipped with a coordinate lever
(joystick). The cast-iron valve housing and
reducer-valve spools of hardened, preci-
sion-ground steel ensure a long service
life with minimal internal leakage. Special
low-friction seals give effective protection
against external leakage.
The PCL4 is designed to give minimal
hysteresis and very good long-term control
characteristics.
Levers are of corrosion-resistant steel
and can be fitted with plastic handles,
balls or window knobs. Pedals can be of
corrosion-resistant, pressed steel plate,
aluminium or rubber-coated steel.
Essential characteristics
• Small dimensions enable simple,
compact installation.
• Robust, simple design gives great
reliability and easy servicing.
• Low, well-adapted lever forces and
short lever strokes give good operating
comfort.
• Lever forces can be specified per
control-pressure port to give function-
specific actuational resistance.
• Low hysteresis gives consistent
machine -function response to valve
actuation.
• Good metering properties enable
gentle, proportional control.
• Very wide range of control-pressure
characteristics enables control of
machine functions to be application-
optimized.
• Wide range of control devices and
accessories gives great flexibility in
system design.
• Valve can be installed in arm rests of
operator’s seat and fitted with site-
suited lever to give very ergonomic
control station.
• Quality materials and great precision in
manufacturing, assembly and testing
assure a quality product with low
internal leakage and long service life.
• Total compatibility with Parker direc-
tional valves gives predictable and
harmonious system characteristics.
General Information