
50P Series
50PR Reverse Flow Filter
transmission loops because of it’s capability to
handle reverse flow.
Closed circuit HSTs frequently reverse direction
causing flow to reverse in the fluid lines. Pressure
filters installed between pump and motor must be able
to handle reverse flow without having contaminant
washed off of the elements and back into the system.
To prevent such an occurrence, the filters require the
use of internal check valves to direct the flow through
the element in one direction and around the element in
the other. Parker’s internal check valve design
minimizes additional pressure loss and eliminates the
cost associated with external valves and fittings. Also
the inter nal design keeps the envelope dimensions of
the filter to a minimum as can be seen on the
installation drawing.
Sizing 50PR Filter Assemblies
To accurately determine the total pressure loss that will
be seen when used in your system, the following steps
should be taken.
the pressure drop for the maximum system flow on
2. Examine the appropriate pressure loss curve for the
media and bowl length combination. These curves
are found in the Element Performance Data section.
3. Find the pressure drop for the maximum flow rate
4. Find the empty housing pressure drop for the
maximum flow rate through the filter and record
5. Add the values obtained in steps 1 and 3, then
subtract out the value from step 4. The resultant
pressure loss should not exceed 1/3 of the bypass
valve or indicator you intend to select. If this ratio
exceeds 1/3, then a double length housing or other
media grade may need to be considered.
Contact the Hydraulic Filter Division if there
is any doubt as to the total pressure loss you
have calculated.
Bypass Valve
RFC
Typical FLow/Pressure Curves For 50 PR
1.75
1.5
1.25
1
0.75
0.5
0.25
0
25
20
15
10
5
0
(BAR)
DIFF. PRESS.
(PSI)
0 10 20 30 40 50 60 70 80 90 100
(GPM)
FLOW
(LPM)
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375
200 SUS200 SUS
FORWARD FLOW (R.F.C.V. ONLY)FORWARD FLOW (R.F.C.V. ONLY)
REVERSE FLOW (TOTAL)REVERSE FLOW (TOTAL)
REVERSE FLOW CHECK VALVEREVERSE FLOW CHECK VALVE