www.nimco-controls.com
Post-Compensated Proportional Valve
CV2000LS
Smart Solutions...
for the Future
General valve description
General Technical Data
IAF - Fixed Pump Inlet Module
IAV - Varialble Pump Inlet Module
IV - Variable pump Inlet Module
IVM - Varialble Pump Mid Inlet Module
IPV - End Plate for Mid Inlet Module
PS – Compensated Section Module
OL - Outlet Module
Spools
Spool Controls
Pilot Controls
Accessory Valves
Dimensional Drawing
Ordering Code
Contents
www.nimco-controls.com
3
General valve description
General Technical Data
IAF - Fixed Pump Inlet Module
IAV - Varialble Pump Inlet Module
IV - Variable pump Inlet Module
IVM - Varialble Pump Mid Inlet Module
IPV - End Plate for Mid Inlet Module
PS – Compensated Section Module
OL - Outlet Module
Spools
Spool Controls
Pilot Controls
Accessory Valves
Dimensional Drawing
Ordering Code
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 21
Page 25
General valve description
www.nimco-controls.com
The CV2000LS is a stackable load sensing and pressure compensated directional control valve for the mobile market. It is designed
for working pressures up to 320 bar [4640 psi], inlet pump flows up to 250 l/min [66 USgpm] and compensated output flow on work
ports up to 125l/min [33 USgpm]. It can be used for both fixed and variable displacement pumps.
The CV2000LS is post compensated which allows all functions to operate even if the pump is saturated and no single function will
take the whole flow deterioration in its function. It has been designed for use in a wide range of applications, such as cranes, sky lifts,
drilling rigs, work platforms, forestry machines, construction equipment, fork lifts etc.
The modular design makes it possible to adapt the valve to specific customer requirements and build a compact and flexible
system solution with 1 to 10 work sections per valve unit and the possibility for a large number of integrated features in different
combinations.
Key user advantages :
- Load independent flow to each work port
- No hydraulic function will cease to operate if the pump is saturated
- Possibility to unload the inlet pressure as emergency stop or energy saving feature
- Port specific pressure compensators in each section module
- Port specific shock/anticavitation valves for each section module
- Port specific LS pressure limiting valve possibility in each section module
- Possibility to remotely unload the flow to each work port
- Possibility to integrate electro hydraulic proportional controls in the section body and have a mechanical override in each section module
- Possibility for integrated pressure reducer for internal pilot supply
- Possibility to adjust the maximum output flow for each work port with spool stroke limiters
4
General Technical Data
www.nimco-controls.com
Pressure Ratings
Maximum Inlet Pressure
Maximum work Port Pressure
Maximum Return Line Pressure
Flow Rates
Maximum inlet flow
Maximum output flow A/B
Temperature Range
Oil Temperature
Ambient Temperature
Spool Leakage
Maximum at 100 bar (1450 psi) 32 mm2/s (cSt)
Filtration
Contamination Level equal to or better than 18/16/13 according to ISO 4406
Oil Viscosity
Recommended Operating Range
Maximum number of Work Sections
Inlet Modules IAF,IAV,IV
Mid Inlet Module IVM
* Inlet Modules IAF, IAV, IV
** Inlet Module IVM
320 bar
350 bar
25 bar
250*/140** l/min
125 l/min
-30 to +90ºC
-30 to +60ºC
20 cm
3
/min
12-380 mm
2
/s
≤10
≤9
4640 psi
5000 psi
363 psi
66*/37** USgpm
33 USgpm
-22 to +194ºF
-22 to +140ºF
1.24 in
3
/min
65-2128 SSU
5
IAF - Fixed Pump Inlet Module
www.nimco-controls.com
TECHNICAL DATA
Maximum Inlet flow
Maximum Working Pressure
Port Size P1
Port Size T1
Port Size PM
Module Weight
140 l/min
320 bar
BSP G3/4”
BSP G1”
BSP G1/4”
6.4 kg
M27x2
M33x2
M14x1,5
37 USGpm
4640 psi
SAE #12
SAE #16
SAE #6
14.1 lbs
MODULE DESCRIPTION
Open center inlet module for fixed pump systems. The bypass spool (3) regulates the excess oil to tank. The bypass pressure is set
by the LS signal spool (5) and is adjustable from 4-19 bar [58-276 psi]. It can be unloaded with the optional electrical unloading valve
(4) for emergency stop or to save energy and prevent unnecessary heating of the oil when no hydraulic functions are needed. The
IAF inlet module can be equipped with a pressure reducing valve (2) for internal pilot pressure supply when using electrical control
of the section modules.
POS. DESCRIPTION Code
1
Inlet Body IAF
2
Press. Reducer for Pilot Supply PRRV
3
Bypass Spool -
4
Electrical Unloading Valve UCV
5
LS Signal Spool -
SAMPLE SCHEMATICS
6
IAV - Varialble Pump Inlet Module
www.nimco-controls.com
TECHNICAL DATA
Maximum Inlet Flow
Maximum Working Pressure
Port Size P1
Port Size T1
Port Size PM
Module Weight
140 l/min
320 bar
BSP G3/4”
BSP G1”
BSP G1/4”
6.4 kg
M27x2
M33x2
M14x1,5
37 USGpm
4640 psi
SAE #12
SAE #16
SAE #6
14.1 lbs
MODULE DESCRIPTION
Closed center inlet module for variable displacement pumps. The compensator spool (3) in the IAV reduces the pump pressure
differential to the pressure differential set by the LS signal spool (5) which is adjustable between 4-19 bar [58-276 psi]. This means
that the system can work with a pressure drop between pump and valve up to the difference Δp
pump
- Δp
valve
without decreasing flow
to the work sections modules. The IAV inlet module can be equipped with a pressure reducing valve (2) for internal pilot pressure
supply when using electrical control of the section modules. It can also be equipped with an electrical unloading valve (4) for use as
an emergency stop.
Pos. Description
Code
1
Inlet Body IAV
2
Press. Reducer for Pilot Supply PRRV
3
Compensator Spool -
4
Electrical Unloading Valve UCV
5
LS Signal Spool -
SAMPLE SCHEMATICS
7
IV - Variable pump Inlet Module
www.nimco-controls.com
TECHNICAL DATA
Maximum Inlet Flow
Maximum Working Pressure
Port Size P1
Port Size T1
Port Size PM
Module Weight
140 l/min
320 bar
BSP G3/4”
BSP G1”
BSP G1/4”
7.3 kg
M27x2
M33x2
M14x1,5
37 USGpm
4640 psi
SAE #12
SAE #16
SAE #6
16.1 lbs
MODULE DESCRIPTION
Closed center inlet module for variable displacement pumps. The IV module can be equipped with a pressure reducing valve (2) for
internal pilot pressure supply when using electrical control of the section modules.
POS. DESCRIPTION Code
1
Inlet Body IV
2
Press. Reducer for Pilot Supply PRRV
SAMPLE SCHEMATICS
8
IVM - Varialble Pump Mid Inlet Module
www.nimco-controls.com
TECHNICAL DATA
Maximum Inlet Flow
Maximum Working Pressure
Port Size P1
Port Size T1
Module Weight
250 l/min
320 bar
BSP G1”
BSP G1-1/4”
7.9 kg
M33x2
M33x2
66 USGpm
4640 psi
SAE #16
SAE #20
17.4 lbs
MODULE DESCRIPTION
Closed center mid inlet module for variable displacement pumps. The IVM module is used for large inlet pump flows and distributes
the flow to section modules on both sides of the inlet module. The IVM module must be used together with the IPV end cover plate.
Pos. Description
Code
1
Inlet Body
SAMPLE SCHEMATICS
9
IPV - End Plate for Mid Inlet Module
www.nimco-controls.com
TECHNICAL DATA
Maximum Working Pressure
Port Size PM
Module Weight
320 bar
BSP G1/4”
4.6 kg
M14x1,5
4640 psi
SAE #6
10.1 lbs
MODULE DESCRIPTION
End cover plate to be used together with the IVM mid inlet module. The IPV can be equipped with a pressure reducing valve (2) for
internal pilot pressure supply.
POS. DESCRIPTION Code
1
End Plate Body IPV
2
Press. Reducer for Pilot Supply PRRV
10
PS – Compensated Section Module
www.nimco-controls.com
TECHNICAL DATA
Load Signal Drain Flow
Maximum Working Pressure
Port Size T2 (Optional)
Port Size PP
Port Size TD
Module Weight
0.8 l/min
320 bar
BSP G1”
BSP G3/8”
BSP G3/8”
4.8 kg
M33x2
M14x1,5
M14x1,5
0.21 USgpm
4640 psi
SAE #16
SAE #6
SAE #6
10.6 lbs
MODULE DESCRIPTION
Post compensated section module for use together with any of the inlet and outlet modules. Load independent flow on each work
port maintained by the individual pressure compensators (3). Possibility to equip with port shock relief and anticavitation valves (7)
for each work port as well as LS pressure limiting valves (8). The work port flow can be unloaded through the optional CU-port (9).
The highest port load pressure in the valve is copied by the LS copy spool (4) to the LS channel. The sections can be equipped with
a main spool control (5) in form of mechanical hand lever or wire control. It can also be equipped with a pilot control (6) in form of
electro hydraulic proportional controls and hydraulic proportional controls in combination with the main spool control. The maximum
spool stroke can be adjusted with spool stroke limiters to set the maximum flow for each work port.
Pos. Description
Code
1
Section Body PS
2
Main Spool Page 13
3
Post Comp. Spool -
4
LS Copy Spool -
5
Spool Control Page 14
6
Pilot Control Page 15
7
Shock/Anticav. Valve WPV
8
LS Pressure Limiter PRL
9
CU-Port CU
11
OL - Outlet Module
www.nimco-controls.com
TECHNICAL DATA
Load signal drain flow
Maximum Working Pressure
Port size T2 (Optional)
Port size PP
Port size TD
Module Weight
0.8 l/min
320 bar
BSP G1”
BSP G3/8”
BSP G3/8”
4.8 kg
M33x2
M14x1,5
M14x1,5
0.21 USgpm
4640 psi
SAE #16
SAE #6
SAE #6
10.6 lbs
MODULE DESCRIPTION
The OL outlet module is used as end plate for the valve unit and can be equipped with an LS pressure relief valve (2) to limit the
maximum LS pressure in the system. When used together with the IAF inlet module this pressure relief valve is used to pilot the
bypass spool in the inlet module to form a pilot operated pressure relief valve for the entire pump flow.
The OL module contains a constant flow LS signal drain valve (3) that drains the LS signal to tank when the section modules are
inactivated, allowing the inlet pressure to return to standby pressure. When parallel connecting several valve units, only one of the
OL modules should be equipped with this valve, and the rest should have plugs.
When electro hydraulic proportional actuation of the main spool is used, the pilot valves can be drained externally to tank from the
outlet section, to protect against varying return line pressures acting on the pilot valves, which could cause unwanted movement of
the main spools. This is made by connecting the external drain port (TD) and blocking the internal drain channel with a plug (4).
POS. DESCRIPTION Code
1
Outlet OL
2
LS Pressure Relief Valve LSRV
3
Load Signal Drain FC
4
External Pilot Drain Plug TD
1212
Spools
www.nimco-controls.com
Spool Type Symbol
Spool Code
Max. Pressure Compensated Flow at �P=14 bar l/min [USgpm] P=14 bar l/min [USgpm]
11
[2.9]
17
[4.5]
24
[6.3]
37
[9.8]
51
[13]
70
[18]
92
[24]
110
[29]
Double Acting 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
Single Acting A-port 2A-1 2A-2 2A-3 2A-4 2A-5 2A-6 2A-7 2A-8
Single Acting B-port 2B-1 2B-2 2B-3 2B-4 2B-5 2B-6 2B-7 2B-8
Motor 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8
Double Acting Drained 5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8
Spool Characteristics
�p = 10 bar
0
20
40
60
80
100
120
0 1 2 3 4 5 6
x [mm]
Q
A/B
[l/min]
0
5
10
15
20
25
30
0 0,04 0,08 0,12 0,16 0,2 0,24
[in]
[USgpm]
The maximum output flows in the table above is based on a pressure drop of 14 bar over the valve. By changing the pressure drop
over the valve the output flow will change according to the following formula:
74.3
new
stdnew
p
qq
∆
=
Where :
∆ Pnew = Desired valve pressure drop
Qnew = Flow at desired pressure drop
Qstd = Flow at 14 bar pressure drop, see table
Spool Characteristics
�p = 14 bar
0
20
40
60
80
100
120
0 1 2 3 4 5 6
x [mm]
Q
A/B
[l/min]
0
5
10
15
20
25
30
0 0,04 0,08 0,12 0,16 0,2 0,24
[in]
[USgpm]
Spool Characteristics
�p = 18 bar
0
20
40
60
80
100
120
0 1 2 3 4 5 6
x [mm]
Q
A/B
[l/min]
0
5
10
15
20
25
30
0 0,04 0,08 0,12 0,16 0,2 0,24
[in]
[USgpm]
13
3,74
Spool Controls
www.nimco-controls.com
Code Type A-Side B-Side Type Code
9 Spring Centered
Enclosed Hand Lever HLB
Enclosed Hand Lever with
Stroke Limiters
HLB-Q
Cable Controls WB
14
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
Pilot Controls
www.nimco-controls.com
Code Type A-Side B-Side Type Code
P Plug Plug P
HP Hydraulic
Proportional
Hydraulic Proportional HP
SPV Electro Hydraulic
Proportional
Electro Hydraulic Proportional SPV
D
BSP G1/4”
SAE SAE#6
Metric M14x1.5
D
BSP G1/4”
SAE SAE#6
Metric M14x1.5
15
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
1
2
0
,
4
7
2
D
D
1
2
0
,472
54,5
2,146
2,362
60
1
,
3
7
8
3
5
71
2,795
20
0,787
1
8
0
,7
0
9
1
8
0
,7
0
9
88,2
3,471
M16x1.5
5
6
2
,2
0
5
5
6
2
,2
0
5
8
0,315
13
0,512
2,362
60
1
,
3
7
8
3
5
55,5
2,185
20
0,787
4
0
,157
8
0
,3
1
5
4
0
,157
8
0
,3
1
5
Accessory Valves
www.nimco-controls.com
UCV - Unload Control Valve
The UCV valve is used in the IF and IVA inlet modules as an emergency stop
feature. In the IF inlet it can also be used to unload the standby pressure for
energy saving and lower heat generation when no hydraulic functions are
used.
Hydraulic Data
Maximum Operating Pressure 345 bar [50000 psi]
Rated Flow 25 l/min
Internal Leakage Max. 0.15 ccm/min at 345 bar [5000 psi]
Contamination Level 20/18/15 acc. ISO 4406
Temperature Range -40 to +120ºC
Electrical Data
Power 345 bar [5000psi]
Voltage 12 V 24 V
Current 1.22 A 0.61 A
Resistance 9.8 Ω ±5% 39.3 Ω ±5%
Connector Type DIN 43650
Protection Class IP65
Electrical data
Ordering Code
UCV- 12- NC-
X
12 V 12
24 V 24
Normally Open NO
Normally Closed NC
Manual Override M
None X
PERFORMANCE (Cartridge Only)
SV08-20 Poppet, 2-Way, Normally Closed
DESCRIPTION
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in
hydraulic cartridge valve, intended to act as a blocking or load-holding device
for low fl ow circuits.
OPERATION
When de-energized, the SV08-20 acts as a check valve, allowing fl ow from to ,
while blocking fl ow from
to .
When energized, the cartridge’s poppet lifts to open the
to fl ow path. In this
mode, fl ow from
to is severely restricted. If this path is required, see model
SV08-22, page 1.041.1.
Operation of Manual Override Option: To override, push button in, twist counter-
clockwise 180°, and release. In this position, the valve will remain open.
To return to normal operation, push button in, twist clockwise 180°, and release.
Override will be detented in this position.
FEATURES
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
• Compact size.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Proof Pressure: 255 bar (3700 psi)
Flow: See Performance Chart
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal fl ow rating: Energized: 40 msec. De-energized: 46 msec.
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectifi ed).
E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-T; See page 8.650.1
Coil Nut: Part No. 7004400;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
SYMBOLS
USASI: ISO:
1.010.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
7.5
2
15.1
4
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
to en ——
to de - - - -
32 cSt/150 ssu oil at 40°C
30.2
8
10.3/150
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
PERFORMANCE
SV08-21 Poppet, 2-Way, Normally Open
DESCRIPTION
A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic
cartridge valve designed for low leakage in load-holding applications.
OPERATION
When de-energized, the SV08-21 allows fl ow from to . Flow from to is
severely restricted in this mode. If the
to path is required see model SV08-23,
page 1.050.1.
When energized, the valve’s poppet closes on its seat, blocking fl ow from
to .
In this mode the cartridge will allow
to fl ow after overcoming the solenoid force
(requires 3.4 to 10.3 bar / 50 to 150 psi).
Operation of Manual Override Option: To override, push and hold override button.
FEATURES
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Effi cient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
• Compact size.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Flow: See Performance Chart
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied at
80% of nominal fl ow rating: Energized: 50 msec.; De-energized: 16 msec.
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectifi ed).
E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-T; See page 8.650.1
Coil Nut: Part No. 7004410;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
SYMBOLS
USASI: ISO:
1.030.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
7.5
2
15.1
4
22.7
6
30.2
8
FLOW lpm/gpm
PRESSURE DROP bar/psi
37.9
10
to de-energized ——
to energized - - - -
32 cSt/150 sus oil at 40°C
PERFORMANCE (Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
16
Accessory Valves
www.nimco-controls.com
SPV Proportional Pressure Reducing Valve
The SPV is a 3/2 way electrically operated proportional pressure reducing
valve used to operate the main spool of the sections when electro hydraulic
actuation is used. It is available for both 12 and 24 V systems and operates
on a PWM signal.
Hydraulic Data
Maximum Operating Pressure P
P
50 bar
Maximum Operating Pressure P
T
30 bar
Pressure Drop 2-1 <9.5 bar at 4 l/min
Pressure Drop 2-3 <6.0 bar at 4 l/min
Hysteresis < 1.0
Contamination Level 20/18/15 acc. ISO 4406
Temperature Range -30 to +105ºC
Electrical Data
Voltage 12 V 24 V
Current 1500 mA 750 mA
Resistance 4.72 Ω ±5% 20.8 Ω ±5%
Recommanded PWM Freq.
120 Hz
Connector Type
AMP Junior Timer
Protection Class
Up to IP6K6/IPX9K
Ordering Code
SPV- 12
12 V 12
24 V 24
Proportional Pressure Control
Direct - PPCD 04
Hydraulic Data
Mineral oil according to DIN
51524
Fluid
-30 to +105°CTemperature Range
Fluid
Min Filtration: 20/18/15
according to ISO 4406
Contamination Level
< 1,0/1,25 bar (p
A
=20/25)Hysteresis
< 6 bar at 4 l/min (p
A
=20)
< 9,5 bar at 4 l/min (p
A
=25)
Pressure Drop A
T
< 9,5bar at 4 l/min (p
A
=20)
< 12bar at 4l/min (p
A
=25)
Pressure Drop P
A
p
P
= 50bar, p
T
= 30barMax Pressure (P, T)
Electrical Data
t
1
, t
2
< 50 ms (50°C Oil temperature)
up to IP6K6/IPX9KProtection
class
AMP Junior Timer
Deutsch Connector DT04-2P
Connector
20,8
Ω ± 5%
750 mA
24 V
4,72
Ω ± 5%Resistance
1500 mACurrent
12 V Voltage
For further particulars and possibilities of use beyond indicated operation limits please contact:
Thomas Magnete GmbH
San Fernando 35 Tel.: +49(0)2744 929-0 www.thomas-magnete.com
57562 Herdorf Fax: +49(0)2744 929-290 info@thomas-magnete.com
Subject to modifications
PPCD
013
/01
/N
/25
/12
/J
0
Connector
J: AMP; D: Deutsch
Emergency Control
0: without
Voltage
12V; 24V
Sealing material
N: NBR; H: HNBR; F:FKM
Cavity
Pressure Range
20 bar; 25 bar
Type
Standard
Function
04
Size
Proportional Pressure Control
Direct - PPCD 04
Hydraulic Data
Mineral oil according to DIN
51524
Fluid
-30 to +105°CTemperature Range
Fluid
Min Filtration: 20/18/15
according to ISO 4406
Contamination Level
< 1,0/1,25 bar (p
A
=20/25)Hysteresis
< 6 bar at 4 l/min (p
A
=20)
< 9,5 bar at 4 l/min (p
A
=25)
Pressure Drop A
T
< 9,5bar at 4 l/min (p
A
=20)
< 12bar at 4l/min (p
A
=25)
Pressure Drop P
A
p
P
= 50bar, p
T
= 30barMax Pressure (P, T)
Electrical Data
t
1
, t
2
< 50 ms (50°C Oil temperature)
up to IP6K6/IPX9KProtection
class
AMP Junior Timer
Deutsch Connector DT04-2P
Connector
20,8
Ω ± 5%
750 mA
24 V
4,72
Ω ± 5%Resistance
1500 mACurrent
12 V Voltage
For further particulars and possibilities of use beyond indicated operation limits please contact:
Thomas Magnete GmbH
San Fernando 35 Tel.: +49(0)2744 929-0 www.thomas-magnete.com
57562 Herdorf Fax: +49(0)2744 929-290 info@thomas-magnete.com
Subject to modifications
PPCD
013
/01
/N
/25
/12
/J
0
Connector
J: AMP; D: Deutsch
Emergency Control
0: without
Voltage
12V; 24V
Sealing material
N: NBR; H: HNBR; F:FKM
Cavity
Pressure Range
20 bar; 25 bar
Type
Standard
Function
04
Size
PERFORMANCE
17
t
1
, t
2
50 ms (50 °C Oil Temperature)
Accessory Valves
www.nimco-controls.com
PRRV - Pressure Reducing Valve
Pressure reducing valve used in the inlet modules to provide internal pilot
pressure for electro hydraulic operation.
Hydraulic Data
Maximum Operating Pressure Port 1 320 bar [4640 psi]
Reduced Pressure Port 2 24 bar [348 psi]
LS pressure relief valve used in outlet module to limit the maximum LS
pressure in the system. When used with the fixed pump inlet IAF it pilots
the bypass spool to form a pilot operated relief valve, see below flow
characteristics.
Hydraulic Data
Maximum Operating Pressure port 1 320 bar [4640 psi]
Pressure Range 30-320 bar
LSRV - Pressure Relief Valve
IAF
Main Relief Valve Characteristics
0
50
100
150
200
250
300
350
0 40 80 120 160
Q
in
[l/min]
�p
P-T
[bar]
0
1000
2000
3000
4000
5000
0 10 20 30 40
[USgpm]
[psi]
PERFORMANCE WITH IAF
Ordering Code
LSRV-
Pressure Setting bar
18
Accessory Valves
www.nimco-controls.com
PRL – LS Pressure Limiter
LS pressure limiting valve used in the section modules to limit the work port
pressure by piloting the post compensator spool, see below characteristics.
Hydraulic Data
Maximum Operating Pressure Port 1 320 bar [4640 psi]
Pressure Range 30-320 bar
Pressure Limiter
Flow Characteristics
0
10
20
30
40
50
60
70
80
90
100
110
0 50 100 150 200 250 300
p
A/B
[bar]
Q
A/B
[l/min]
0
5
10
15
20
25
0 1000 2000 3000 4000
[psi]
[USgpm]
PERFORMANCE
PRL in section module piloting the post compensator spool
19
Ordering Code
PRL-
Pressure Setting bar
Accessory Valves
www.nimco-controls.com
WPV valves are used as secondary valves in the PS section module for work
port shock relief and anticavitation or just anticavitation. The direct action and
specific design allow a very fast opening and closing.
Hydraulic Data
Maximum Operating Pressure Port 1 350 bar [5075 psi]
Pressure Range 10-350 bar [150-5075 psi]
Maximum Flow 60 l/min [16 USgpm]
Weight 0.048 kg [0.106 lbs] 0.048 kg [0.106 lbs]
WPV – Secondary valves
Ordering Code
WPV- CA
Shock/Anticav. CA
Anticav A
Pressure Setting CA [bar]
For A-version, leave blank
Port Relief Valve
Characteristics
0
50
100
150
200
250
0 10 20 30 40 50 60
Q
in
[l/min]
�
p
P-T
[bar]
0
700
1400
2100
2800
3500
0 2 4 6 8 10 12 14
[USgpm]
[psi]
Anticavitation Valve
Characteristics
0
2
4
6
8
10
12
0 10 20 30 40 50 60
Q
in
[l/min]
�
p
P-T
[bar]
0
20
40
60
80
100
120
140
160
0 2 4 6 8 10 12 14
[USgpm]
[psi]
20
www.nimco-controls.com
Parallel Connection
21
When parallel connecting several CV2000LS valve units to the same pump, only one of the outlet modules can be equipped
with the Load Signal Drain Valve (FC) and the Load Signal Relief Valve (LSRV). All other outlet modules have to have these
functions plugged. The LS-signal should be parallel connected between the valves, but no shuttle valves should be used
in the LS-line. See the schematics for an example of parallel connection.
www.nimco-controls.com
Dimensional Drawing for Mid Inlet
SAEPORT METRICBSP
P1 M33x2SAE #16G1"
M42x2SAE #20T1 G1-1/4"
G1/2"A M22x1.5SAE #10
G1/2"B M22x1.5SAE #10
G1/4"LS M14x1.5SAE #6
PM M14x1.5G1/4" SAE #6
M14x1.5SAE #6G3/8"TM
G3/8" M14x1.5PP SAE #6
M14X1.5SAE #6G3/8"TD
Standard Threads
BSP (ISO 228/1) SAE (ISO 11926) METRIC (ISO 6149)
Mounting Holes
US VIEW SETTING
W
o
r
k
p
o
r
t
A
W
o
r
k
p
o
r
t
B
P
u
m
p
p
o
r
t
P
1
T
a
n
k
p
o
r
t
T
1
E
x
t
.
d
r
a
i
n
p
o
r
t
T
D
43
1,69
2,36
39 1,54
41 1,61
19 0,75
19 0,75
30 1,18
1,2632
60
38 1,50
32
L2
L1
[18.43]
468
[20.35]
517
[16.73]
425
[18.66]
474
[15.04]
382
[16.97]
431
[13.35]
339
[15.28]
388
[11.65]
296
[13.58]
345
[9.96]
253
[11.89]
302
[8.27]
210
[10.20]
259
[6.57]
167
[8.50]
216
[in]
mm
[in]
mm
6 87 9
54
Standard for housings
machined with
BSP and Metric ports
Standard for housings
machined with
SAE ports
W
o
r
k
p
o
r
t
B
L
o
a
d
s
e
n
s
e
p
o
r
t
L
S
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
B
-
s
i
d
e
S
p
o
o
l
C
o
n
t
r
o
l
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
B
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
A
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
A
A
-
s
i
d
e
P
i
l
o
t
C
o
n
t
r
o
l
S
p
o
o
l
C
o
n
t
r
o
l
A
-
s
i
d
e
P
i
l
o
t
C
o
n
t
r
o
l
B
-
s
i
d
e
40 1,57
40 1,57
G
a
g
e
p
o
r
t
T
m
G
a
g
e
p
o
r
t
P
m
P
r
e
s
s
u
r
e
r
e
d
u
c
i
n
g
v
a
l
v
e
I
n
t
e
r
n
a
l
p
i
l
o
t
p
r
e
s
s
u
r
e
262,5 10,33
177,6 6,99
2,0151
179 7,05
128,5 5,06
148,8 5,86
93,5
3,68
40 1,57
14 0,55
284 11,18
6,22
299,2 11,78
77,5 3,05
157,9
51 2,01
200 7,87
S
e
e
t
a
b
l
e
M
o
u
n
t
i
n
g
H
o
l
e
s
E
x
t
.
p
i
l
o
t
p
r
e
s
s
u
r
e
p
o
r
t
P
P
L2
0,35
21
0,83
L1
9
28 1,10
0,338,5
10M
min.12 0,47
16 max.0,63
0,338,4
UNC 3/8-16
min.12 0,47
16 max.0,63
22
SAEPORT METRICBSP
P1 M27x2SAE #12G3/4"
M33x2SAE #16T1 G1"
G1"T2 M33x2SAE #16
G1/2"A M22x1.5SAE #10
G1/2"B M22x1.5SAE #10
LS M14x1.5G1/4" SAE #6
M14x1.5SAE #6G1/4"PM
G3/8" M14x1.5PP SAE #6
M14X1.5SAE #6G3/8"TD
Standard Threads
BSP (ISO 228/1) SAE (ISO 11926) METRIC (ISO 6149)
4
L2
L1
[17.72]
450
[20.39]
518
[16.02]
407
[18.70]
475
[14.33]
264
[17.01]
432
[12.64]
321
[15.31]
389
[10.94]
278
[13.62]
346
[9.25]
235
[11.93]
303
[7.56]
192
[10.24]
260
[5.87]
149
[8.54]
217
[4.17]
106
[6.85]
174
[2.48]
63
131
[5.16][in]
mm
[in]
mm
6 87 9 10
5321
19 0,75
1,65
26 1,02
42
19
0,75
58,5 2,30
25 0,98
Standard for housings
machined with
SAE ports
EUROPEAN VIEW SETTING
Mounting Holes
P
o
r
t
T
D
P
u
m
p
P
o
r
t
P
1
T
a
n
k
P
o
r
t
T
1
W
o
r
k
p
o
r
t
A
E
x
t
e
r
n
a
l
P
i
l
o
t
D
r
a
i
n
W
o
r
k
p
o
r
t
B
25
0,98 21,5 0,85
1,9750
1,6943
1,5038
23 0,91
E
l
e
c
t
r
i
c
a
l
u
n
l
o
a
d
i
n
g
v
a
l
v
e
I
n
t
e
r
n
a
l
p
i
l
o
t
p
r
e
s
s
u
r
e
P
r
e
s
s
u
r
e
r
e
d
u
c
i
n
g
v
a
l
v
e
G
a
g
e
p
o
r
t
P
m
0,65
6,32160,5
5,61142,5
51
2,01
6,99177,6
192
131
7,56
10,63
1,1729,6
5,16
16,5
270
6,22157,9
2,0151
73,5 2,89
148,6 5,85
E
x
t
e
r
n
a
l
P
i
l
o
t
P
r
e
s
s
u
r
e
P
o
r
t
P
P
M
o
u
n
t
i
n
g
h
o
l
e
s
(
3
x
)
S
e
e
t
a
b
l
e
3,4688
0,31
L1
0,5113
L2
8
35,5 1,40
Standard for housings
machined with
BSP and Metric ports
0,63
max.
UNC 3/8-16
min.12 0,47
16
8,4 0,33
L
o
a
d
s
e
n
s
e
p
o
r
t
L
S
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
T
a
n
k
p
o
r
t
T
2
W
o
r
k
p
o
r
t
A
(
O
p
t
i
o
n
a
l
)
A
-
s
i
d
e
S
p
o
o
l
C
o
n
t
r
o
l
A
-
s
i
d
e
P
i
l
o
t
C
o
n
t
r
o
l
B
-
s
i
d
e
P
i
l
o
t
C
o
n
t
r
o
l
B
-
s
i
d
e
S
p
o
o
l
C
o
n
t
r
o
l
W
o
r
k
p
o
r
t
A
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
B
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
B
1,58
18,5 0,73
4040 1,57
0,63
max.
M10
min.12 0,47
16
8,5 0,33
www.nimco-controls.com
Dimensional Drawing
23
www.nimco-controls.com
Dimensional Drawing
4
L2
L1
[17.72]
450
[20.39]
518
[16.02]
407
[18.70]
475
[14.33]
264
[17.01]
432
[12.64]
321
[15.31]
389
[10.94]
278
[13.62]
346
[9.25]
235
[11.93]
303
[7.56]
192
[10.24]
260
[5.87]
149
[8.54]
217
[4.17]
106
[6.85]
174
[2.48]
63
131
[5.16][in]
mm
[in]
mm
6 87 9 10
5321
SAEPORT METRICBSP
P1 M27x2SAE #12G3/4"
M33x2SAE #16T1 G1"
G1"T2 M33x2SAE #16
G1/2"A M22x1.5SAE #10
G1/2"B M22x1.5SAE #10
LS M14x1.5G1/4" SAE #6
M14x1.5SAE #6G1/4"PM
G3/8" M14x1.5PP SAE #6
M14X1.5SAE #6G3/8"TD
Standard Threads
BSP (ISO 228/1) SAE (ISO 11926) METRIC (ISO 6149)
Mounting Holes
US VIEW SETTING
58,5 2,30
25 0,98
19
0,75
26
19
1,02
0,75
42 1,65
Standard for housings
machined with
SAE ports
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
B
S
p
o
o
l
C
o
n
t
r
o
l
B
-
s
i
d
e
T
a
n
k
p
o
r
t
T
2
S
p
o
o
l
C
o
n
t
r
o
l
A
-
s
i
d
e
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
A
P
i
l
o
t
C
o
n
t
r
o
l
B
-
s
i
d
e
A
-
s
i
d
e
P
i
l
o
t
C
o
n
t
r
o
l
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
A
(
O
p
t
i
o
n
a
l
)
L
o
a
d
s
e
n
s
e
p
o
r
t
L
S
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
B
18,5
0,73
1,58
4040 1,57
E
x
t
e
r
n
a
l
P
i
l
o
t
P
r
e
s
s
u
r
e
P
o
r
t
P
P
M
o
u
n
t
i
n
g
h
o
l
e
s
(
3
x
)
S
e
e
t
a
b
l
e
13
88
L2
3,46
0,51
0,31
L1
8
35,5 1,40
max.
M10
12
0,63
min.
0,47
16
8,5 0,33
P
o
r
t
T
D
W
o
r
k
p
o
r
t
A
P
u
m
p
P
o
r
t
P
1
T
a
n
k
P
o
r
t
T
1
E
x
t
e
r
n
a
l
P
i
l
o
t
D
r
a
i
n
W
o
r
k
p
o
r
t
B
1,50
38
50
1,97
0,8521,5
0,98
25
1,69
43
23 0,91
Standard for housings
machined with
BSP and Metric ports
UNC 3/8-16
min.
12
0,47
0,63 max.
16
8,4 0,33
E
l
e
c
t
r
i
c
a
l
u
n
l
o
a
d
i
n
g
v
a
l
v
e
I
n
t
e
r
n
a
l
p
i
l
o
t
p
r
e
s
s
u
r
e
P
r
e
s
s
u
r
e
r
e
d
u
c
i
n
g
v
a
l
v
e
G
a
g
e
p
o
r
t
P
m
29,6
5,61
0,65
157,9 6,22
2,01
270
16,5
51
51
2,01
177,6
7,56
6,32
10,63
142,5
5,16
1,17
6,99
192
160,5
131
73,5 2,89
148,6 5,85
24
SAEPORT METRICBSP
P1 M33x2SAE #16G1"
M42x2SAE #20T1 G1-1/4"
G1/2"A M22x1.5SAE #10
G1/2"B M22x1.5SAE #10
G1/4"LS M14x1.5SAE #6
PM M14x1.5G1/4" SAE #6
M14x1.5SAE #6G3/8"TM
G3/8" M14x1.5PP SAE #6
M14X1.5SAE #6G3/8"TD
Standard Threads
BSP (ISO 228/1) SAE (ISO 11926) METRIC (ISO 6149)
2
L2
L1
[18.43]
468
[20.35]
517
[16.73]
425
[18.66]
474
[15.04]
382
[16.97]
431
[13.35]
339
[15.28]
388
[11.65]
296
[13.58]
345
[9.96]
253
[11.89]
302
[8.27]
210
[10.20]
259
[6.57]
167
[8.50]
216
[in]
mm
[in]
mm
6 87 9
53 4
G
a
g
e
p
o
r
t
T
m
G
a
g
e
p
o
r
t
P
m
P
r
e
s
s
u
r
e
r
e
d
u
c
i
n
g
v
a
l
v
e
I
n
t
e
r
n
a
l
p
i
l
o
t
p
r
e
s
s
u
r
e
14
0,55
177,6 6,99
2,0151
179 7,05
128,5 5,06
148,8 5,86
93,5
3,68
40 1,57
262,5
10,33
284 11,18
6,22
299,2 11,78
77,5 3,05
157,9
51 2,01
200 7,87
Mounting Holes
EUROPEAN VIEW SETTING
A
-
s
i
d
e
S
p
o
o
l
C
o
n
t
r
o
l
B
-
s
i
d
e
S
p
o
o
l
C
o
n
t
r
o
l
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
W
o
r
k
p
o
r
t
B
A
-
s
i
d
e
P
i
lot
C
o
n
t
r
o
l
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
A
S
h
o
c
k
/
A
n
t
i
c
a
v
.
v
a
l
v
e
W
o
r
k
p
o
r
t
B
L
o
a
d
s
e
n
s
e
p
o
r
t
L
S
W
o
r
k
p
o
r
t
A
L
S
P
r
e
s
s
u
r
e
L
i
m
i
t
e
r
P
i
l
o
t
C
o
n
t
r
o
l
B
-
s
i
d
e
40
1,57 40 1,57
0,338,5
10M
min.12 0,47
16 max.0,63
Standard for housings
machined with
BSP and Metric ports
Standard for housings
machined with
SAE ports
P
u
m
p
p
o
r
t
P
1
W
o
r
k
p
o
r
t
B
W
o
r
k
p
o
r
t
A
T
a
n
k
p
o
r
t
T
1
E
x
t
.
d
r
a
i
n
p
o
r
t
T
D
1,61
41
43
1,69
2,36
1,54
39
19 0,75
19 0,75
30 1,18
1,2632
60
38 1,50
S
e
e
t
a
b
l
e
M
o
u
n
t
i
n
g
H
o
l
e
s
E
x
t
.
p
i
l
o
t
p
r
e
s
s
u
r
e
p
o
r
t
P
P
0,35
L2
21
0,83
L1
9
28 1,10
0,338,4
UNC 3/8-16
min.12 0,47
16 max.0,63
www.nimco-controls.com
Dimensional Drawing for Mid Inlet
25
Ordering Code
www.nimco-controls.com
Enter option codes in the empty fields for desired inlet module, leave the rest blank
Inlet Module IAF IAV IV IVM
Internal Pilot Pressure Supply
Pressure reducing valve PRRV
None P
Electrical Unloading Valve (UAV)
* *
� �
* 12 VDC 12
* 24 VDC 24
** Unloading when no signal to UCV NO
** Unloading when no signal to UCV + Man. Override NO-M
** Unloading when signal to UCV NC
** Unloading when signal to UCV + Man. Override NC-M
** None P
Threads
BSP G
Metric M
SAE S
Enter option codes in the empty fields for each individual section of the valve up to the desired number of sections, leave the rest blank
Section Module PS 1 2 3 4 5 6 7 8 9 10
Spool Code
See page 13
Spool Control
Manual hand lever HLB
Manual hand lever with spool stroke limiters HLB-Q
Cable control WB
Hand Lever Pin
Yes S+length [mm]
None
X
Pilot Control A-side
Electric Proportional Solenoid 12 VDC SPV-12
Electric Proportional Solenoid 24 VDC SPV-24
Hydraulic Proportional Control HP
None P
Pilot Control B-side
Solenoid 12VDC SPV-12
Solenoid 24VDC SPV-24
Hydraulic Prop. Control HP
None P
Secondary Valves A-side (WPV)
Shock/Anticav-valve CA+pressure setting in bar [psi]
Antacav. Valve A
None P
Secondary Valves B-side (WPV)
Shock/Anticav-Valve CA+pressure setting in bar [psi]
Antacav. Valve A
None P
Pressure Limiter A-side
Pressure limiter PRL+pressure setting in bar [psi]
None P
Pressure Limiter B-side
Pressure limiter PRL+pressure setting in bar [psi]
None P
Compensator Unloading A-side
Compensator unloading port CU
None P
Compensator Unloading B-side
Compensator unloading port CU
None P
Threads
BSP G
Metric M
SAE S
Enter options codes for outlet module in the empty fields
Outlet Module OL
LS Pressure Relief Valve
LS Pressure Relief valve LSRV+pressure setting in bar [psi]
None P
Load Signal Drain
Load Signal Drain Valve FC
None P
Pilot Drain
External Drain TD
Internal Drain P
Pilot Pressure
Internal pilot Pressure P
External Pilot Pressure PP
Threads
BSP G
Metric M
SAE S
** **
� �
26
Enter option codes in the empty fields for desired inlet module, leave the rest blank
Inlet Module IAF IAV IV IVM
Internal Pilot Pressure Supply
Pressure reducing valve PRRV
None P
Electrical Unloading Valve (UAV)
* *
� �
* 12 VDC 12
* 24 VDC 24
** Unloading when no signal to UCV NO
** Unloading when no signal to UCV + Man. Override NO-M
** Unloading when signal to UCV NC
** Unloading when signal to UCV + Man. Override NC-M
** None P
Threads
BSP G
Metric M
SAE S
Enter option codes in the empty fields for each individual section of the valve up to the desired number of sections, leave the rest blank
Section Module PS 1 2 3 4 5 6 7 8 9 10
Spool Code
See page 13
Spool Control
Manual hand lever HLB
Manual hand lever with spool stroke limiters HLB-Q
Cable control WB
Hand Lever Pin
Yes S+length [mm]
None
X
Pilot Control A-side
Electric Proportional Solenoid 12 VDC SPV-12
Electric Proportional Solenoid 24 VDC SPV-24
Hydraulic Proportional Control HP
None P
Pilot Control B-side
Solenoid 12VDC SPV-12
Solenoid 24VDC SPV-24
Hydraulic Prop. Control HP
None P
Secondary Valves A-side (WPV)
Shock/Anticav-valve CA+pressure setting in bar [psi]
Antacav. Valve A
None P
Secondary Valves B-side (WPV)
Shock/Anticav-Valve CA+pressure setting in bar [psi]
Antacav. Valve A
None P
Pressure Limiter A-side
Pressure limiter PRL+pressure setting in bar [psi]
None P
Pressure Limiter B-side
Pressure limiter PRL+pressure setting in bar [psi]
None P
Compensator Unloading A-side
Compensator unloading port CU
None P
Compensator Unloading B-side
Compensator unloading port CU
None P
Threads
BSP G
Metric M
SAE S
Enter options codes for outlet module in the empty fields
Outlet Module OL
LS Pressure Relief Valve
LS Pressure Relief valve LSRV+pressure setting in bar [psi]
None P
Load Signal Drain
Load Signal Drain Valve FC
None P
Pilot Drain
External Drain TD
Internal Drain P
Pilot Pressure
Internal pilot Pressure P
External Pilot Pressure PP
Threads
BSP G
Metric M
SAE S
** **
� �
27
System Options Overview
EPC 100
EPC 300
EPC 700
EPC 350
CC8/BI
CC8
EDB 16-64
EDB 8-64
CV2000 LS
27
EasyProg
www.nimco-controls.com
Post-Compensated Proportional Valve
CV2000LS
Smart Solutions...
for the Future
Rev.3
