
DIRECTIONAL VALVES
LSV1 Load Shuttle, Ball-Type
DESCRIPTION
An in-line plumbed, low leak, load-shuttling hydraulic check valve for use as a direc-
tional selector.
OPERATION
The LSV1 will allow fl ow from the higher pressure of ➀ or ➂ to ➁.
The valve is commonly used to direct oil from the pressure side of a bidirectional
hydraulic motor to a pressure-released hydraulic brake.
FEATURES
• Hardened seat for long life and low leakage.
• Rapid response to load direction changes.
• Compact size.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions
Seal Kit: Non-serviceable
USASI/ISO:
SYMBOLS
PERFORMANCE (Cartridge Only)
4.260.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
7.5
2
15.1
4
30.2
8
FLOW lpm/gpm
PRESSURE DROP bar/psi
22.7
6
or to
32 cSt/150 ssu oil at 40°C
➀➂➁
HYDRAFORCE
.com
®