HPCV16
hydraforce.com
HIGH PRESSURE PILOT OPERATED CHECK VALVE
Overview
Symbol
Description
The HPCV16 is a high pressure pilot operated, hydraulic check valve for
use in blocking or load holding circuits
Operation
The valve allows flow from port "b" to port "a", while normally blocking
flow in the opposite direction. Flow will be allowed from "a" to "b" when
pressure is applied to port "x". The valve has 2.3:1 pilot ratio, so at least
44% of the load pressure held at port "a" is required at port "x" to open
the valve
Features
Hardened seat for long life and low leakage.
❍
Optional sealed pilot piston.
❍
Optional spring ranges.
❍
Check section is serviceable as a cartridge.
❍
All HyPerformance products are tested to the rigorous standards of
the NFPA specification T2.6.1.
❍
All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
350 bar
420 bar (5075 psi)
6090 psi - Note: 10% cycle life
Proof pressure
689 bar (10000 psi)
Burst pressure
1379 bar (20000 psi)
Pilot ratio
2.3:1
Flow Ratings
Flow rating
151 lpm (40 gpm)
Maximum internal leakage
5 drops/min - Note: Port A to b, at 350 bar (5075 psi)
200 ml/min - Note: Port x to b, at 34.5 bar (500 psi)
1.5 lpm (0.4 gpm) - Note: Port x to b, at 350 bar (5075 psi)
hydraforce.com
10/12/2020
HPCV16
HPCV16
hydraforce.com
HIGH PRESSURE PILOT OPERATED CHECK VALVE
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid
temperature
-54 to 107 °C (-65 to 225 °F)
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
7.23 kg (15.93 lb)
Internal wetted surface area
385 cm²; (59.6 in²;)
Performance
hydraforce.com
10/12/2020
HPCV16
HPCV16
hydraforce.com
HIGH PRESSURE PILOT OPERATED CHECK VALVE
Dimensions
hydraforce.com
10/12/2020
HPCV16
HPCV16
hydraforce.com
HIGH PRESSURE PILOT OPERATED CHECK VALVE
Materials
Materials
Assembly: Weight: 7.23 kg (15.93 lb)
Cartridge:
(HCV16-20) Weight: 0.32 kg (0.70 lb) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane
seals without back-ups standard.
hydraforce.com
10/12/2020
HPCV16
HPCV16
hydraforce.com
HIGH PRESSURE PILOT OPERATED CHECK VALVE
Pilot Piston: Hardened Steel.
Ported Body : H-series ductile iron standard. Rated to 345 bar (5000 psi)
Installation Specifications
Cavity
Hvc16-pcv
Cartridge installation torque
298 to 311 N-m (220 to 230 ft-lb) - Note: Steel/ductile iron cavity
237 to 250 N-m (175 to 185 ft-lb) - Note: Aluminum cavity
Orientation restriction
None all dimensions are for reference only. (reference all sheets) d:3.2 m:3.2
port "x" (pilot) ductile iron body shown
Accessories
Seal kit
Housings
Order code
hydraforce.com
10/12/2020
HPCV16