PRESSURE CONTROLS
PS10-30 Sequence, Internal Pilot & Drain
DESCRIPTION
A screw-in, cartridge-style, direct-acting, spool-type, hydraulic sequence valve with
internal pilot and spring chamber drain, designed to direct fl ow to a secondary circuit
once a pre-determined pressure level is attained in the primary circuit.
OPERATION
In its steady state, the PS10-30 blocks fl ow at ➀, while allowing fl ow to pass from
➁ to ➂.
On attainment of a pre-determined pressure at
➀, the cartridge shifts to open ➀ to ➁.
FEATURES
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Optional spring ranges to 144.8 bar (2100 psi).
• Hardened spool and cage for long life.
• Industry common cavity.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Flow: See Performance Chart
Internal Leakage
➀ to ➁: 82 cc/minute (5 cu. in./minute) max. to 85% of nominal
setting
Standard Spring Ranges:
2.8 to 27.6 bar (40 to 400 psi);
14.5 to 144.8 bar (210 to 2100 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1
Cavity Tool: CT10-3XX; See page 8.600.1
Seal Kit: SK10-3X-BB; See page 8.650.1
USASI/ISO:
PERFORMANCE (Cartridge Only)
6.510.1
8.3/120
11.0/160
13.8/200
16.6/240
19.3/280
22.1/320
24.8/360
5.5/80
2.8/40
7.6
2
15.1
4
22.7
6
30.3
8
FLOW RATE lpm/gpm
PRESSURE DROP bar/psi
37.9
10
Pressure Drop vs. Flow
➁ to ➂
32 cSt/150 ssu oil at 40°C
55.2/800
137.9/2000
144.8/2100
151.7/2200
158.6/2300
165.5/2400
172.4/2500
179.3/2600
48.3/700
34.5/500
41.4/600
7.6
2
15.1
4
22.7
6
30.3
8
FLOW RATE lpm/gpm
PRESSURE DROP bar/psi
37.9
10
Pressure vs. Flow
➀ to ➁; 210 to 2100 psi Spring
——— Maximum Setting
- - - - - Minimum Setting
32 cSt/150 ssu oil at 40°C
6.9/100
10.3/150
13.8/200
17.2/250
20.7/300
24.1/350
27.6/400
31.0/450
34.5/500
3.4/50
7.6
2
15.1
4
22.7
6
30.3
8
FLOW RATE lpm/gpm
PRESSURE DROP bar/psi
37.9
10
Pressure vs. Flow
➀ to ➁; 40–400 psi Spring
——— Maximum Setting
- - - - - Minimum Setting
32 cSt/150 ssu oil at 40°C
HYDRAFORCE
.com
®
SYMBOLS
Blue rectangles are links to other catalog pages.
Setting in bar
†
(Blank) for Adjustable, or
Specify, for example:
M25 25 bar
M100 100 bar
Setting in psi
†
(Blank) for Adjustable, or
Specify, for example:
9.0 900 psi
21.0 2100 psi
Seals
Buna N (Std.) N
Fluorocarbon V
TO ORDER
Cartridge: Weight: 0.27 kg. (0.60 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N O-rings and polyester
elastomer
back-ups standard.
Anodized aluminum knobs
and caps.
Standard Ported Body: Weight:
0.36 kg. (0.80 lbs.). Anodized
high-strength 6061 T6 aluminum
alloy, rated to 207 bar (3000 psi).
Ductile iron bodies available;
dimensions may differ.
See page 8.010.1
PS10-30__ - __ __ __ - __ - __ __ / __ __ __ __
Adjustment Option
1/4 in. Hex Allen Head A
1-1/2 in. Dia. Alum Knob B
Option A w/Cover Cap C
Factory Preset Non-Adj. F
Factory Preset
Hidden Adj. H
Option C
w/Lockwire Holes L
DIMENSIONS
Spring Range
4 2.8 to 27.6 bar
(40 to 400 psi)
21 14.5 to 144.8 bar
(210 to 2100 psi)
Porting
Cartridge Only 0
SAE 6 6T
SAE 8 8T
1/4 in. BSP* 2B
3/8 in. BSP* 3B
*BSP Body; U.K. Mfr. Only
PS10-30
6.510.2
†
Adjustable valves will be
preset to approx. 50% of
spring max. potential.
®
HYDRAFORCE
HYDRAFORCE
.com
®
MATERIALS
Blue rectangles are links to other catalog pages.