PRESSURE CONTROLS
RV10-23 Relief, Pilot-Operated
DESCRIPTION
A screw-in, cartridge-style, pilot-operated, two-stage, hydraulic relief valve intended
for use as a pressure limiting device in demanding hydraulic circuits which require
fast response, low hysteresis, low leakage and low pressure overshoot.
OPERATION
The RV10-23 blocks fl ow from ➀ to ➁ until suffi cient pressure is present at ➀ to
force the pilot stage open, allowing the main stage to shift, opening
➀ to ➁.
Note: The RV10-23 may be used in cross-over relief applications, however, it is not
recommended for use as in parallel cross-over relief or anti-cavitation applications.
Consult factory for proper fl ow path connections.
FEATURES
• Adjustments cannot be backed out of the valve.
• Hardened spool and cage for long life.
• Fast response.
• Industry common cavity.
RATINGS:
Operating Pressure Range: 20.7 to 240 bar (300 to 3500 psi)
Flow: 7.6 to 113.6 lpm (2 to 30 gpm)
Internal Leakage: 0.5 ml/minute (10 drops/minute) max. to 80% of nominal setting
Crack Pressure Defi ned: bar (psi) evident at 7.6 lpm (2.0 gpm) attained
Reseat Pressure: Nominal 90% of crack pressure
Pressure Rise: at 240 bar (3500 psi): 0.15 bar/lpm (8 psi/gpm)
Operating Temperature: with Buna N seals: -54 to 135°C (-65 to 275°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2, Variation “A”; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-M; See page 8.650.1
USASI/ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
6.060.1
276/4000
207/3000
172/2500
241/3500
138/2000
103/1500
70/1000
35/500
38
10
19
5
57
15
95
25
76
20
FLOW lpm/gpm
Δ PRESSURE bar/psi
114
30
Relief Pressure vs. Flow
32 cSt/150 sus oil at 40°C
276/4000
207/3000
172/2500
241/3500
138/2000
103/1500
70/1000
35/500
0.500.25 0.75 1.25
1.00
TIME seconds
Δ PRESSURE bar/psi
1.50
Dynamic Response
Test Conditions:
3500 psi/2.0 gpm Setting
15 gpm Disturbance Flow
Flow
x 100
Inlet Pressure
Note: This new model RV10-23 should be used instead of the
older model RV10-24 (page 6.062.1) which is being
discontinued. For applications where low-overshoot
and reverse free-fl ow features are required, see model
RV10-28 (page 6.170.1).
HYDRAFORCE
.com
®
U.S. Patent
7,069,945
Blue rectangles are links to other catalog pages.
DIMENSIONS
MATERIALS
Cartridge: Weight: 0.25 kg. (0.55 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N O-rings and polyester
elastomer back-ups standard.
Anodized aluminum knobs.
Optional polyurethane seals
with Fluorocarbon back-up
recommended for pressures
over 240 bar (3500 psi).
Standard Ported Body: Weight:
0.16 kg. (0.35 lbs.) Anodized high-
strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi). Ductile
iron bodies available; dimensions
may differ. See page 8.010.1
TO ORDER
RV10-23__ - __ __ __ - __ - __ __ / __ __ __ __
Porting
Cartridge Only 0
SAE 6 6T
SAE 8 8T
3/8 in. BSP* 3B
1/2 in. BSP* 4B
*BSP Body; U.K. Mfr. Only
RV10-23
6.060.2
Spring Range
35 20.7 to 241.4 bar
(300 to 3500 psi)
†
Adjustable valves will be
preset to approx. 50% of
spring max. potential, or
21 bar (300 psi), whichever
is less.
Seals
Pressure on
P Only:
N Buna N (Std.)
V Fluorocarbon
INSTALLATION TORQUE:
25–27 ft-lbs (34–36 Nm)
With “H” Style Adjustment Option:
25 ft-lbs (33.9 Nm) max.
Setting in bar
†
(Blank) for Adjustable, or
Specify, for example:
M21 21 bar (Minimum)
M100 100 bar
Setting in psi
†
(Blank) for Adjustable, or
Specify, for example:
3.0 300 psi (Minimum)
23.5 2350 psi
®
HYDRAFORCE
HYDRAFORCE
.com
®
U.S. Patent 7,069,945
Adjustment Option
1/4 in. Hex Allen Head A
1-1/2 in. Dia. Alum. Knob B
Option A w/ Cover Cap C
Factory Preset Non-Adj. F
Factory Preset
Hidden Adj. H
Option C w/
Lockwire Holes L
Blue rectangles are links to other catalog pages.