DIRECTIONAL VALVES
PD16-S60N Piloted 4-Way Spool
DESCRIPTION
A screw-in, cartridge-style, pilot-operated, spool-type, hydraulic directional valve.
OPERATION
In the neutral position, the PD16-S60N allows fl ow between ports ➁ and ➂, and
from
➃ to ➄. On remote pilot signal at ➀, the valve shifts to allow fl ow between ➂ and
➃ and from ➁ to ➄. The spring chamber is vented to the tank through port ➅. The
vented spring chamber allows the valve to be fully pressurized at ports
➀, ➁, ➂ and
➃ without affecting required pilot pressure. Pressure at port ➅ will affect required
pilot pressure.
FEATURES
• Hardened spool and cage for long life.
• 60, 80, 110 and 170 psi bias springs available.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: 0–95 lpm (0–25 gpm); See Performance Chart
Maximum Internal Leakage: at 207 bar (3000 psi): 164 ml/minute (10 cu. in./minute)
Pilot Pressure Required: 4.1 bar (60 psi) mimimum
Oil Volume Required to Full Shift: 1.5 cc (0.09 cu. in.)
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-S6; See page 9.116.1
Cavity Tool: CT16-S6XX; See page 8.600.1
Seal Kit: SK16-S6X-BMMMM; See page 8.650.1
USASI:
ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
4.388.1
13.8/200
15.5/225
12.1/175
10.3/150
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
18.9
5
37.9
10
56.8
15
75.7
20
94.6
25
FLOW lpm/gpm
PRESSURE DROP bar/psi
32 cSt/150 sus oil at 40°C
➁ to ➂
➂
to ➃
➁
to ➄
➃
to ➄
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
Cartridge: Weight: 0.25 kg. (0.55 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N O-rings and polyester
elastomer back-ups standard.
Ported Body: Consult factory.
DIMENSIONS
MATERIALS TO ORDER
PD16-S60N
4.388.2
PD16-S60N - __ __ __ - __ - __ __ __
Porting
Cartridge Only 0
Bias Spring
†
60 4.1 bar (60 psi)
80 5.5 bar (80 psi)
110 7.6 bar (110 psi)
170 11.7 bar (170 psi)
Optional bias springs considered
on OEM request.
†
Note: 110 psi bias spring is the
minimum required for use with
sealed spool.
5.19
131.8
2.03
51.6
INCH
MILLIMETRE
1.50
38.1
ACROSS FLATS
TORQUE:
50 ft-lbs (67.7 Nm)
max.
Seals
N Buna N (Std.)
V Fluorocarbon
NS Buna N w/Sealed Spool
➀ to ➁ only
VS Fluorocarbon w/Sealed Spool
➀ to ➁ only
®
HYDRAFORCE
HYDRAFORCE
.com
®