
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device.
OPERATION
The CV10-24 allows flow passage from 2 to 1, while blocking flow from 1 to 2.
The cartridge has a fully guided check which is spring-biased closed until sufficient
pressure is applied at 2 to open to 1.
FEATURES
• Low check mass for anti-cavitation applications.
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Industry common cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage: 0.25 ml/minute (5 drops/minute) max. at 241 bar (3500 psi)
Crack Pressure Defined: Gauge psi evident at 2 at 16.4 cc/minute (1 cu. in./minute)
attained at 1
Standard Bias Springs at Crack: 0.35 bar (5 psi); 1.7 bar (25 psi); 3.8 bar(55 psi)
Temperature: -40° to 120°C (-40°F to 250°F with Buna N seals; -35°C to 204°C
(-31°F to 400°F) with Viton seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kits: SK10-2X-B; See page 8.650.1
DIRECTIONAL VALVES
CV10-24 Check Valve
4.040.1
5.5/80
4.1/60
2.8/40
PRESSURE DROP bar/psi
Port 2 to 1
(with 0.34 bar/5 psi spring)
32 cSt/150 sus oil at 40°C
11.4
3
22.7
6
34.1
9
FLOW lpm/gpm
45.4
12
1.4/20
56.8
15
HYDRAFORCE
.com
®
PERFORMANCE (Cartridge Only)
ISO SYMBOL
Blue rectangles are links to other catalog pages.