
DIRECTIONAL VALVES
CV12-21 Check Valve
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device.
OPERATION
The CV12-21 allows fl ow passage from ➁ to ➀, while blocking fl ow from ➀ to ➁.
The cartridge has a fully guided check which is spring-biased closed until suffi cient
pressure is applied at
➁ to open to ➀.
FEATURES
• Low check mass for anti-cavitation applications.
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application fl exibility.
• Cost-effective cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 240 bar (3500 psi)
Crack Pressure Defi ned: Gauge bar (psi) evident at
➁ at 16.4 cc/minute
(1 cu. in./minute) attained at
➀
Standard Bias Springs at Crack: 0.4 bar (6 psi); 1.8 bar (26 psi); 3.8 bar (56 psi)
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: See note in dimension drawing regarding minimum pilot drill diameter
Cavity: VC12-2 (Cavity Variation “A”); See page 9.112.1
Cavity Tool: CT12-2XX; See page 8.600.1
Seal Kit: SK12-2X-B; See page 8.650.1
USASI: ISO:
4.020.1
6.9/100
5.5/80
4.1/60
2.8/40
PRESSURE DROP bar/psi
18.9
5
37.9
10
56.8
15
FLOW lpm/gpm
75.8
20
1.4/20
94.6
25
113.6
30
to
(with 0.4 bar/6 psi spring)
32 cSt/150 ssu oil at 40°C
➁➀
HYDRAFORCE
.com
®
PERFORMANCE (Cartridge Only)
SYMBOLS
Blue rectangles are links to other catalog pages.