DIRECTIONAL VALVES
CV08-21 Check Valve
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device.
OPERATION
The CV08-21 allows fl ow passage from ➁ to ➀, while normally blocking oil fl ow in the
opposite direction.
The cartridge has a fully guided poppet which is spring-biased closed until suffi cient
pressure is applied at
➁ to open to ➀.
FEATURES
• Hardened seat for long life and low leakage.
• Fully guided poppet.
• Compact size.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 240 bar (3500 psi)
Crack Pressure Defi ned: Gauge bar (psi) evident at
➁ at 16.4 cc/minute
(1 cu. in./minute) attained
Standard Bias Spring at Crack: 2.1 bar (30 psi) nominal. Actual cracking pressure
may vary from 1.9 to 2.8 bar (27 to 40 psi); valves which are not actuated for a
period of time may initially crack at higher than subsequent cracking pressures.
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-B; See page 8.650.1
USASI: ISO:
PERFORMANCE (Cartridge Only)
SYMBOLS
4.018.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
7.5
2
15.1
4
22.7
6
30.2
8
FLOW lpm/gpm
PRESSURE DROP bar/psi
to
Increasing — ; Decreasing - - - Flow
32 cSt/150 ssu oil at 40°C
➁➀
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
Porting
Cartridge Only 0
SAE 4 4T
SAE 6 6T
1/4 in. BSP* 2B
3/8 in. BSP* 3B
1/2 in. BSP* 4B
*BSP Body;
U.K. Mfr. Only
Cartridge: Weight: 0.05 kg. (0.12 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N O-rings and back-up
standard.
Standard Ported Body: Weight:
0.16 kg. (0.35 lbs.) Anodized high-
strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi). Ductile
iron bodies available; dimensions
may differ. See page 8.008.1
CV08-21
DIMENSIONS
MATERIALS
TO ORDER
Seals
N Buna N (Std.)
V Fluorocarbon
__
CV08-21 - __ __ __ - __ - 30
Standard Bias Spring
30 2.07 bar (30 psi)
4.018.2
®
HYDRAFORCE
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.