DIRECTIONAL VALVES
HCV42-M20 HyPerformance
TM
Check Valve
USASI/ISO:
PERFORMANCE (Cartridge Only)
SYMBOLS
4.017.1
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device in high pressure applications.
OPERATION
The HCV42-M20 allows fl ow from ➀ to ➁, while blocking fl ow in the opposite
direction.
The cartridge has a fully guided poppet which is spring-biased to closed until
suffi cient pressure is applied at
➀ to open to ➁.
FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application fl exibility.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specifi cation T2.6.1.
• All HyPerformance valves are tested at a verifi cation level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar
and 100K at 420 bar.
Fatigue Rating: 2 million cycles at 420 bar
Burst Pressure: 1380 bar (20000 psi)
Flow: 303 lpm (80 gpm)
Max. Internal Leakage: 0.25 cc/minute (5 drops/minute) at 350 bar (5075 psi)
Operating Temperature: -54 to 107°C (-65 to 225°F) with Urethane seals
Ambient Temperature: -40 to 90°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-M2; See page 9.142.1
Cavity Tool: HCT42-M2XX; See page 8.600.1
Seal Kit: SK42-M2X-X; See page 8.650.1
HYDRAFORCE
.com
®
6.9/100
6.2/90
5.5/80
4.8/70
4.1/60
3.4/50
2.8/40
2.1/30
1.4/20
0.7/10
7.6/110
8.3/120
9.0/130
9.7/140
10.3/150
11.0/160
11.7/170
12.4/180
13.1/190
13.8/200
FLOW lpm/gpm
Pressure Drop vs. Flow
for each Spring Code Option
32 cSt/150 sus oil at 40°C
PRESSURE DROP bar/psi
76
20
114
30
100
60
30
15
05
151
40
189
50
227
60
265
70
303
80
38
10
Blue rectangles are links to other catalog pages.
Cartridge: Weight: 0.68 kg. (1.50 lbs.)
Steel with hardened work surfaces.
Zinc-nickel plated exposed surfaces.
PPDI Urethane seals with no backup
rings standard.
Ported Body: Weight: 7.21 kg.
(15.89 lbs.); HyPerformance™
Ductile iron (code ‘D’) standard.
Rated to 345 bar (5000 psi).
Porting
Cartridge Only 0
SAE 20 20TD
1-1/4 in. BSP* 10BD
*BSP Body; U.K. Mfr. Only
Seals
U PPDI Urethane
— Recommended for
pressures above 241 bar (3500 psi
Bias Spring Value
5 0.35 bar (5 psi)
15 1.0 bar (15 psi)
30 2.1 bar (30 psi)
60 4.1 bar (60 psi)
100 6.9 bar (100 psi)
HCV42-M20
DIMENSIONS
MATERIALS
TO ORDER
HCV42-M20
-__ __ __ - __ - __ __
4.017.2
®
HYDRAFORCE
HYDRAFORCE
.com
®
2.32
58.9
0.80
20.3
M42 x 2 – 6g
2.00
50.8
ACROSS FLATS
TORQUE:
290 to 300 ft-lbs
0.44
11.2
3.63
92.2
1.31
33.3
3.25
82.6
4.00
01.6
0.344 (8.7 mm)
Dia. Mounting
Holes (2)
4.00
01.6
4.50
114.3
2.00
50.8
394 to 420 Nm
Orifice Discs Cannot Be Used
with this Valve due to
HyPerformance
TM
Cavity.
Blue rectangles are links to other catalog pages.
