DIRECTIONAL VALVES
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device for high pressure applications.
OPERATION
The HCV12-20 allows flow passage from 1 to 2, while normally blocking oil flow in the
opposite direction.
The cartridge has a fully guided check which is spring-biased closed until sufficient
pressure is applied at 1 to open to 2.
FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Fully guided check assembly.
• Cost effective cavity.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi) 10% cycle life: 420 bar (6090 psi)
Fatigue Rating: Two million cycles at 420 bar (6090 psi)
Cycle Life: One million cycles
Proof Pressure: 420 bar (6090 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 95 lpm (25 gpm)
Internal Leakage: 0.25 ml/minute (5 drops/minute) max. at 350 bar (5075 psi)
Operating Temperature: -54° to 107°C (-65° to 225°F) with PPDI Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-2; See page 9.112.1
Cavity Tool: HCT12-2XX; See page 8.600.1
Seal Kit: SK12-2U-0; See page 8.650.1
HCV12-20 HyPerformance™ Check Valve
PERFORMANCE (Cartridge Only)
ISO SYMBOL
4.013.3
PRESSURE DROP bar/psi
FLOW lpm/gpm
PRESSURE DROP vs. FLOW
32 cSt Oil at 40°C (104°F)
2.1 bar (30 psi) spring
0.34 bar (5 psi) spring
5.5 bar (80 psi) spring
0 19/5 38/10 57/15 76/20 95/25
0.7/10
2.1/30
3.4/50
6.2/90
7.6/110
9.0/130
10.3/150
4.8/70
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
HCV12-20 - __ __ __ - __ - __ __
Cartridge: Weight: 0.18 kg. (0.40 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
PPDI urethane seals without
back-ups standard.
Standard Ported Body: Weight:
2.74 kg. (6.05 lbs.) HyPerformance™
Ductile iron (code 'D') standard.
Rated to 345 bar (5000 psi).
MATERIALS
TO ORDER
Seals
U PPDI Urethane - Recommended for
pressures above 241 bar (3500 psi)
NOTE: Additional seal options available.
Consult factory.
Bias Spring*
5 0.34 bar (5 psi)
25 1.7 bar (25 psi)
30 2.1 bar (30 psi)
40 2.8 bar (40 psi)
50 3.4 bar (50 psi)
60 4.1 bar (60 psi)
80 5.5 bar (80 psi)
Porting
Cartridge Only 0
1 In. BSP* 8BD
SAE 16 16TD
HCV12-20
4.013.4
DIMENSIONS
1.33
33.7
3.25
82.6
2.00
50.8
2.56
65.0
0.35
8.8
2.25
57.2
3.50
88.9
1.66
27.0
0.344 (8.7 mm)
Dia. Mounting
Holes (2)
TORQUE:
115 to 125 ft-lbs
156 to 170 Nm
1.31
33.3
ACROSS FLATS
1-1/16-12
UN-2A Thread
1.83
46.4
0.44
11.0
Orifice Disks Cannot Be Used
With This Valve Due to
HyPerformance™ Cavity.
®
HYDRAFORCE
HYDRAFORCE
.com
®
*BSP Body; U.K. Mfr. Only
Blue rectangles are links to other catalog pages.