
DIRECTIONAL VALVES
CV50-20 Check Valve, High Pressure
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device for high pressure applications.
OPERATION
The CV50-20 allows fl ow passage from ➀ to ➁, while normally blocking oil fl ow in the
opposite direction.
The cartridge has a fully guided check which is spring-biased closed until suffi cient
pressure is applied at
➀ to open to ➁.
FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application fl exibility.
• Fully guided check assembly.
• Industry common cavity.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Flow: See Performance Chart
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 345 bar (5000 psi)
Crack Pressure Defi ned: Gauge psi evident at
➀ at 16.4 cc/minute (1 cu. in./minute)
attained
Standard Bias Springs at Crack: 0.34 bar (5 psi); 1 bar (15 psi); 2.1 bar (30 psi);
4.8 bar (70 psi)
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2P-T; See page 8.650.1
USASI:
ISO:
PERFORMANCE (Cartridge Only)
SYMBOLS
4.012.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
18.9
5
37.9
10
56.8
15
FLOW lpm/gpm
PRESSURE DROP bar/psi
to
with 2.1 bar/30 psi spring —;
with 0.34 bar/5 psi spring - - -;
32 cSt/150 ssu oil at 40°C
75.8
20
➀➁
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.