
DIRECTIONAL VALVES
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device.
OPERATION
The CV10-20 allows flow passage from 1 to 2, while normally blocking oil flow in the
opposite direction.
The cartridge has a fully guided check which is spring-biased closed until sufficient
pressure is applied at 1 to open to 2.
FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Fully guided check assembly.
• Industry common cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: 75.8 lpm (20 gpm)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 240 bar (3500 psi)
Crack Pressure Defined: Gauge psi evident at 1 at 16.4 cc/minute (1 cu. in./minute)
attained
Standard Bias Springs at Crack: 0.34 bar (5 psi); 1 bar (15 psi); 2.1 bar (30 psi);
4.8 bar (70 psi); 6.9 bar (100 psi)
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-T; See page 8.650.1
CV10-20 Check Valve
USASI:
ISO:
SYMBOLS
4.011.1
8.6/125
6.9/100
5.2/75
3.4/50
1.7/25
18.9
5
37.9
10
56.8
15
FLOW lpm/gpm
PRESSURE DROP bar/psi
1 to 2
with 2.1 bar/30 psi spring —;
with 0.34 bar/5 psi spring - - -;
32 cSt/150 sus oil at 40°C
75.8
20
HYDRAFORCE
.com
®
PERFORMANCE (Cartridge Only)
Blue rectangles are links to other catalog pages.