DIRECTIONAL VALVES
HCV08-20 HyPerformance™ Check Valve
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device for high pressure applications.
OPERATION
The HCV08-20 allows flow passage from 1 to 2, while normally blocking oil flow in the
opposite direction.
The cartridge valve has a fully guided poppet which is spring-bias closed until
sufficient pressure is applied at 1 to open to 2.
FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Fully guided check assembly.
• Compact size.
• Fast closing and seating.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA
specification T2.6.1 and are tested at a verification level of 90% and an assurance
of 99%
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and
100K at 420 bar.
Proof Pressure: 630 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow Rating: 30 lpm (8 gpm)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 350 bar (5075 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna N seals; -26 to 204°C
(-15 to 400°F) with Viton seals; -54 to 107°C (-65 to 225°F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC08-2; See page 9.108.1
Cavity Tool: HCT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-T; See page 8.650.1
PERFORMANCE (Cartridge Only)
ISO SYMBOL
4.010.3
9.7/140
6.9/100
4.1/60
1.4/20
7.5
2
15.1
4
22.7
6
30.3
8
FLOW lpm/gpm
PRESSURE DROP bar/psi
Pressure Drop vs. Flow (cartridge only)
32 cSt/150 sus oil at 40°C
80 psi spring 30 psi spring 3 psi spring
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
HCV08-20 - __ __ __ - __ - __ __
Cartridge: Weight: 0.07 kg. (0.15 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Standard Ported Body:
Consult factory.
HCV08-20
MATERIALS
TO ORDER
Porting
Cartridge Only 0
Seals
Buna N (Std.) N
Fluorocarbon V
Urethane U
DIMENSIONS
4.010.4
ORIFICE DISC CANNOT BE USED
WITH THIS VALVE
due to HyPerformance™ cavity.
0.37
9.4
0.94
23.8
1.15
29.2
Bias Spring
3 0.2 bar (3 psi)
7 0.5 bar (7 psi)
10 0.7 bar (10 psi)
20 1.4 bar (20 psi)
30 2.1 bar (30 psi)
45 3.1 bar (45 psi)
60 4.1 bar (60 psi)
80 5.5 bar (80 psi)
110 7.6 bar (110 psi)
150 10.3 bar (150 psi)
®
HYDRAFORCE
HYDRAFORCE
.com
®
Note: Urethane seals recommended
for operating pressures above
241 bar (3500 psi).
Consult factory for additional seal
options.
Blue rectangles are links to other catalog pages.