HSV10-23 HyPerformance
TM
Poppet, 2-Way, Open
DESCRIPTION
A high pressure, solenoid operated, 2-way, piloted, poppet-type, normally open,
screw-in hydraulic cartridge valve, designed for low leakage in load-holding
applications.
OPERATION
When de-energized, the HSV10-23 allows flow bi-directionally. When energized, the
valve's poppet closes on its seat, blocking flow from ports 2 to 1. In this mode, the
cartridge will allow flow from ports 1 to 2 after overcoming the actuator and spring
forces (see performance graph).
FEATURES
• Continuous-duty rated solenoid.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Waterproof E-Coils rated up to IP69K.
• 1000-hour salt-spray rated solenoid tubes and coils.
• Unitized, molded coil design.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar
and 100K cycles at 420 bar.
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 75.7 lpm (20 gpm)
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. with 350 bar (5075 psi)
at port 2.
Temperature: -54° to 107°C (-65° to 255° F) with Urethane seals.
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied at
80% of nominal flow rating: Energized: 80 msec.; De-energized: 30 msec.
Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 24 VDC
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-2; See page 9.110.1
Cavity Tool: HCT10-2xx; See page 8.600.1
Seal Kit: SK10-2N-M ; See page 8.650.1
Coil Nut: Part No. 4555250
1.053.3
SYMBOL
PERFORMANCE
(Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
10.3/150
12.4/180
14.5/210
16.6/240
17.9/260
8.3/120
6.2/90
4.1/60
2.1/30
18.9
5
37.9
10
56.8
15
FLOW lpm/gpm
PRESSURE DROP bar/psi
75.7
20
Port 1 to 2, energized - - - -
Port 1 to 2, de-energized
Port 2 to 1, de-energized ——
32 cSt/150 sus oil at 40°C
Blue rectangles are links to other catalog pages.
HSV10-23
DIMENSIONS
1.053.4
TO ORDER
HSV10-23__ - __ __ __ - __ - __ __ __ __ __
Option
None (Blank)
Cartridge: Weight: 0.19 kg.
(0.42 lbs.); Steel with hardened
work surfaces. Zinc-plated
exposed surfaces. Urethane
O-ring without back-up standard.
Ported Body: Weight: 1.19 kg.
(2.62 lbs.); HyPerformance™
Ductile iron (code ‘D’) standard.
Rated to 345 bar (5000 psi).
E-Coil: Weight: 0.41 kg. (0.9 lbs.);
Fully encapsulated with rugged
external metal shell. Rated up to
IP69K with integral connectors.
See page 3.400.1.
Seals
PPDI Urethane U
MATERIALS
®
HYDRAFORCE
HYDRAFORCE
.com
®
Voltage
0 Less Coil**
10 10 VDC
12 12 VDC
20 20 VDC
24 24 VDC
For Coils with Zener Diode, add “/Z” to option code.
For example: “ER/Z”. Not available on all models.
See coil option info. on page 3.400.1
Coil Termination
Deutsch DT04-2P ER (IP69K)
Metri-Pak 150 EY (IP69K)
Dual Lead Wires EL (IP69K)
Amp Jr. Timer EJ (IP67)
DIN 43650 EG (IP65)
**Includes E-Coil Nut.
Recommended for pressures
above 241 bar (3500 psi).
COIL MUST BE
INSTALLED WITH
LETTERING UP
2.95
ORIFICE DISC CANNOT
BE USED WITH THIS PRODUCT
due to HyPerformance
TM
Cavity.
75.0
ACROSS FLATS
1.31
33.3
1.06
26.9
0.75
19.1
1.50
38.1
1.62
41.1
1.00
25.4
2.43
61.7
1.84
DIA.
46.7
2.00
50.8
0.20
0.281 (7.1 mm)
Dia. Mounting
Holes (2)
5.1
1.63
41.3
2.43
61.7
TORQUE: 5 – 7 ft-lb.
TORQUE:
75 – 85 ft-lb.
6.8 – 9.5 Nm
102 – 115 Nm
Porting
Cartridge Only 0
SAE 8 8TD
1/2 in. BSP* 4BD
*BSP Body; U.K. Mfr. Only
Blue rectangles are links to other catalog pages.