SV58-P20A Poppet, 2-Way, Normally Closed
DESCRIPTION
A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic
cartridge valve with integral neutral sensor, designed to function as a load holding
or blocking valve in applications requiring low internal leakage.
OPERATION
When de-energized, the SV58-P20A acts as a check valve, allowing flow from 1 to 2,
while blocking flow in the reverse direction. The neutral sensor will transmit an “Off”
signal. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode,
flow from 1 to 2 is severely restricted. The neutral sensor will transmit an “On” signal.
FEATURES
• Continuous-duty rated solenoids with optional coil voltages and terminations.
• Hardened seat for long life and low leakage.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Integral position sensor, EMI/RFI CE-rated.
• Unitized, molded coil design — optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Proof Pressure: 483 bar (7000 psi)
Burst Pressure: 634 bar (9200 psi)
Flow: up to 18.9 lpm (5 gpm), see Performance Chart
Internal Leakage: In Neutral: 0.15 cc/min. (5 drops/min.) max. at 345 bar (5000 psi)
Typical Flow (Leakage) in Transition: 0.3 lpm (0.8 gpm) at 345 bar (5000 psi);
see Flow vs. Valve Shift graph.
Temperature: -54°C to 107°C (-65°F to 225°F) with Polyurethane seals;
Sensor Option: -40°C to 110°C (-40°F to 230°F)
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Pull-In Response Time: 57 ms (first indication of change when 100% voltage
is applied to the coil)
Drop-Out Response Time: 152 ms (first indication of change when voltage
goes to zero)
Initial Coil Current Draw at 20°C: Standard Coil: 1.67 amps at 12 VDC;
0.18 amps at 115 VAC (full wave rectified).
E-Coil: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1;
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2P-T; See page 8.650.1
Coil Nut: Part No. 7004400
Position Sensor Ratings: See Sensor Option page 3.010.1
1.025.1
SYMBOL
PERFORMANCE
(Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
19.3/280
16.5/240
13.8/200
11.0/160
8.3/120
7.6
2
15.9
4
22.7
6
FLOW lpm/gpm
PRESSURE bar/psi
SV58-P20A with Sensor
1 to 2 de-energized ——
2 to 1 energized - - - -
32 cSt/150 sus oil at 40°C
30.3
8
5.5/80
2.8/40
VALVE SHIFT %
FLOW
Vcc
SENSOR OUTPUT
Typical Sensor Output vs. Valve Shift
0
0.3 lpm
0.08 gpm
56.8 lpm
15 gpm
15 20 50 100
VOUT
Hatched Area: Overlapping Stroke, Leakage Flow
SV58-P20Awith Neutral Sensor
1.025.2
TO ORDER
SV58-(P)20(A) -__ __ - __ - __ __ __ __ - __ __
Cartridge: Weight: 0.50 kg.
(1.1 lbs.); Steel with hardened
work surfaces. Zinc-plated
exposed surfaces. Polyurethane
O-rings and polyester elastomer
back-up standard.
Standard Ported Body: Ductile
iron (code 'D') standard. Rated to
345 bar (5000 psi).
See page 8.008.1.
Standard Coil: Weight: 0.27 kg.
(0.60 lbs.); Unitized thermoplastic
encapsulated, Class H high tem-
perature magnet wire.
See page 3.200.1.
E-Coil: Weight: 0.41 kg. (0.9 lbs.);
Fully encapsulated with rugged
external metal shell. Rated up to
IP69K with integral connectors.
See page 3.400.1.
Porting
Cartridge Only 0
SAE 4 4TD
SAE 6 6TD
SAE 8 8TD
1/4 in. BSP* 2BD
3/8 in. BSP* 3BD
*BSP Body; U.K. Mfr. Only
Seals
Polyurethane P
Sensor
N Neutral Sensor/DT04-4P
M Neutral Sense/M12-4P
Mating Connectors:
DT06-4S: Part No. 4001953
M12-4S: available at www.turck.com
or www.binder-usa.com
Sensor Type
3 Dual Output, N.C./N.O.
Voltage
0 Less Coil**
12 12 VDC
24 24 VDC
**Includes Std. Coil
Nut.
E-Coils: 12 or 24
VDC only.
MATERIALS
®
HYDRAFORCE
HYDRAFORCE
.com
®
For Coils with Zener Diode, add “/Z” to option code.
For example: “ER/Z”. Not available on all models.
See coil option info. on pages 3.200.1 & 3.400.1
Coil Termination E-Coil D-Coil
Deutsch DT04-2P ER (IP69K) —
Metri-Pack
®
150 EY (IP69K) —
Dual Lead Wires — DL (IP65)
DIN 43650 — DG (IP65)
Dual Spades — DS (IP65)
With sensor option,
use model code
SV58-P20A
see page 3.010.1.
Without sensor option,
use model code
SV58-20.
DIMENSIONS
DIA.
1.84
46.7
5.02
127.4
0.87
22.1
1.48
37.6
1.25
31.8
1.09
27.7
5.02
127.4
TORQUE
5–7 ft-lbs
(6.8–9.5 Nm)
1.00
ACROSS
25.4
FLATS
E-Coil
View
D-Coil
View
TORQUE
39–41 ft-lbs
1.00
ACROSS
25.4
FLATS
1.62
41.1
1.63
41.3
0.28
7.1
(2)
Thru
0.20
5.1
1.50
38.1
2.25
57.2
0.61
15.5
DUCTILE IRON
BODY SHOWN
Sensor Option: See page 3.010.1