293
E 7.562.3/03.12
Inline Filter FLN
to DIN 24550
up to 400 l/min, up to 25 bar
1. TECHNICAL
SPECIFICATIONS
1.1 FILTER HOUSING
Construction
The lter housings are designed
in accordance with international
regulations. They consist of a lter
head and a screw-in lter bowl.
Standard equipment:
without bypass valve
oil drain plug
connection for a clogging indicator
1.2 FILTER ELEMENTS
HYDAC lter elements are validated
and their quality is constantly
monitored according to the following
standards:
ISO 2941
ISO 2942
ISO 2943
ISO 3724
ISO 3968
ISO 11170
ISO 16889
Contamination retention capacities
in g
Betamicron
®
BN4HC
FLN 3 µm 6 µm 10 µm 25 µm
160 27.5 29.3 33.1 36.7
250 46.0 49.0 55.2 61.3
400 76.2 81.3 91.4 101.5
Filter elements are available with the
following pressure stability values:
Betamicron
®
(BN4HC): 20 bar
Wire mesh (W/HC): 20 bar
1.4 SEALS
NBR (= Perbunan)
1.5 INSTALLATION
As inline lter
1.6 SPECIAL MODELS AND
ACCESSORIES
With bypass valve
1.7 SPARE PARTS
See Original Spare Parts List
1.8 CERTIFICATES AND APPROVALS
On request
1.9 COMPATIBILITY WITH
HYDRAULIC FLUIDS ISO 2943
Hydraulic oils H to HLPD DIN 51524
Lubrication oils DIN 51517, API,
ACEA, DIN 51515, ISO 6743
Compressor oils DIN 51506
Biodegradable operating uids VDMA
24568 HETG, HEES, HEPG
Operating uids with high water
content (>50% water content)
on request
1.10 MAINTENANCE INSTRUCTIONS
Filter housings must be earthed.
When using electrical clogging
indicators, the electrical power supply
to the system must be switched off
before removing the clogging indicator
connector.
1.3 FILTER SPECIFICATIONS
Nominal pressure 25 bar
Fatigue strength At nominal pressure 10
6
cycles
from 0 to nominal pressure
Temperature range -30 °C to +100 °C
Material of lter head Aluminium
Material of lter bowl Aluminium
Type of indicator VM (Diff. pressure indicator
up to 210 bar operating pressure)
VD (Diff. pressure indicator
up to 420 bar operating pressure - only
for types LE and LZ)
Pressure setting of the clogging indicator 5 bar (others on request)
Bypass cracking pressure (optional) 3.5 bar or 7 bar (others on request)
Symbol for hydraulic systems
FLN 160 FLN 250 FLN 400
E 7.562.3/03.12
294
E 7.562.3/03.12
FLN BN/HC 250 D F 10 D 1 . X /-L24
Filter type
FLN
Filter material of element
BN/HC Betamicron
®
(BN4HC)
W/HC Stainless steel wire mesh
Size of lter or element
FLN: 160, 250, 400
Operating pressure
D = 25 bar
Type and size of port
to DIN 24550 ( ), possible ports ( X )
Type Port Filter size
160 250 400
E G 1¼
X X
F G 1½ X
X
K DN 38* X X
*Flange SAE 1½", 3000 PSI
Filtration rating in µm
BN/HC: 3, 6, 10, 25
W/HC: 25, 50, 100, 200
Type of clogging indicator
Y plastic blanking plug in indicator port
A steel blanking plug in indicator port
B visual
C electrical for other clogging indicators,
D visual and electrical see brochure no. 7.050../..
LZ visual-mechanical / electrical
Type code
1
Modication number
X the latest version is always supplied
Supplementary details
A. pressure setting (e.g. A2 = 2 bar)
B. bypass cracking pressure (e. g.: B3.5 = 3.5 bar; B7 = 7 bar); no details = without bypass valve
L... light with appropriate voltage (24, 48, 110, 220 Volt) only for clogging
LED 2 light-emitting diodes 24 Volt indicators Type "D"
AV LZ indicator with plug to AUDI and VW specications
BO LZ indicator with plug and pin connections to BMW and Opel specication (M12x1)
CN LZ indicator with plug to DIN 43651 with 3 LEDs (CNOMO specication)
DB LZ indicator with plug to DIN 43651 with 3 LEDs (Daimler-Benz specication)
D4C LZ indicator with plug and connector to Daimler-Chrysler specication and cold start suppression 30 °C
BO-LED as for BO, but with diode strip
V FPM seals
W suitable for HFA and HFC emulsions
2. MODEL CODE (also order example)
2.1 COMPLETE FILTER
0250 DN 010 BN4HC /-V
Size
0160, 0250, 0400
Type
DN
Filtration rating in µm
BN4HC : 003, 006, 010, 025
W/HC : 025, 050, 100, 200
Filter material
BN4HC, W/HC
Supplementary details
V, W (for descriptions, see point 2.1)
2.2 REPLACEMENT ELEMENT
2.3 REPLACEMENT CLOGGING INDICATOR VM 5 D . X /-L24
Type of indicator
VM Differential pressure indicator up to 210 bar operating pressure
VD Differential pressure indicator up to 420 bar operating pressure (only for types LE and LZ)
Pressure setting
5 standard 5 bar, others on request
Type of clogging indicator
D (see Point 2.1)
Modication number
X the latest version is always supplied
Supplementary details
L..., LED, V, W (for descriptions, see point 2.1)
295
E 7.562.3/03.12
3. FILTER CALCULATION /
SIZING
The total pressure drop of a lter at a
certain ow rate Q is the sum of the
housing ∆p and the element ∆p and is
calculated as follows:
∆p
total
=∆p
housing
+∆p
element
∆p
housing
= (see Point 3.1)
∆p
element
= Q •
SK*
•
viscosity
1000 30
(*see point 3.2)
For ease of calculation, our Filter
Sizing Program is available on request
free of charge.
NEW: Sizing online at www.hydac.com
3.1 ∆p-Q HOUSING CURVES BASED
ON ISO 3968
The housing curves apply to mineral
oil with a density of 0.86 kg/dm³ and
a kinematic viscosity of 30 mm²/s.
In this case, the differential pressure
changes proportionally to the density.
3.2 GRADIENT COEFFICIENTS (SK) FOR FILTER ELEMENTS
The gradient coefcients in mbar/(l/min) apply to mineral oils with a kinematic
viscosity of 30 mm²/s. The pressure drop changes proportionally to the change in
viscosity.
FLN 160, 250, 400
FLN BN4HC W/HC
3 µm 6 µm 10 µm 25 µm –
160 7.9 5.1 3.4 2.6 0.168
250 5.1 3.2 2.1 1.7 0.101
400 3.2 2.0 1.3 1.0 0.068
∆p [bar]
Q [l/min]
BN4HC: FLN 160
∆p [bar]
Q [l/min]
BN4HC: FLN 400
∆p [bar]
Q [l/min]
∆p [bar]
Q [l/min]
BN4HC: FLN 250
296
E 7.562.3/03.12
4. DIMENSIONS
NOTE
The information in this brochure relates to the operating conditions and
applications described.
For applications or operating conditions not described, please contact the relevant
technical department.
Subject to technical modications.
HYDAC FILTERTECHNIK GMBH
Industriegebiet
D-66280 Sulzbach/Saar, Germany
Tel.: 0 68 97 / 509-01
Fax: 0 68 97 / 509-300
Internet: www.hydac.com
FLN Weight incl. Vol. of pressure
element [kg] chamber [l]
160 4.3 1.4
250 4.9 2.0
400 5.9 3.1
also G 1 1/4 or
ange DN38
possible
port for differential
clogging indicator
FLN 400:
FLN 250:
mounting bore M12 x 15
FLN 160:
inlet
outlet
drain G3/8