E 5.998.2.0/12.10
332
Solenoid Directional Valve
SAE 12-Cartridge - 350 bar
2/2 Normally Open
WS12Y-01
Poppet Type - Pilot Operated
110 l/min
350 bar
In the de-energized mode, the valve
allows ow from 2 to 1. Flow from 1 to 2
is severely restricted in this mode.
When energized, the valve blocks ow
from 2 to 1. In this mode the valve will
allow ow from 1 to 2 after the hydraulic
force overcomes the solenoid force
(1.5 to 6.5 bar).
Features
Excellent switching performance by high power HYDAC solenoid
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and to extend service life
Rigid design by using one-piece body minimizes the effect of eccentricity and
maximizes reliability
All surfaces zinc-plated and corrosion-proof
Waterproof design standard
Wide variety of connectors available
Low pressure drop by CFD optimized ow-path
Function
speciFications
Operating pressure: 350 bar
Nominal ow: 110 l/min
Internal leakage: leak-free (less than 5 drops/min)
at 350 bar
Media operating temperature range: -20 °C to +120 °C
Ambient temperature range: -20 °C to +60 °C
Coil duty rating: continuous from 85% to 115% of
nominal voltage
Current draw at 20 °C: 1.5 amps at 12 V DC
0.8 amps at 24 V DC
Minimum pull-in voltage: 85 % of nominal
Response time: Energized: 90 ms
De-energized: 25 ms
typical 24 V DC-coil
Fluids: Mineral-based or synthetics with
lubricating properties
Viscosity: 7.4 to 420 cSt
Filtration: Class 21/19/16 according to
ISO 4406 or cleaner
Installation: No orientation restrictions
Material: Valve body: carbon steel
Piston: carbon steel
Seals: NBR (standard)
FKM (optional)
Coil: steel/polyamide
Cavity: FC12-2
Weight: Valve complete: 490 g
Coil only: 190 g
E 5.998.2.0/12.10
333
model code
WS12Y-01M-C-N-24DG
BasicModel
Option
Omission = No Option
M = Manual Override
BodyandPorts*
C = Cartridge only
SB6 = 3/4 BSP ports, steel body
SS12 = SAE-12 ports, steel body
AB6 = 3/4 BSP ports, aluminium body
AS12 = SAE-12 ports, aluminium body
Seals
N = NBR
V = FKM
CoilVoltage
DC
10 = 10 V DC
12 = 12 V DC
24 = 24 V DC
36 = 36 V DC
48 = 48 V DC
110 = 100 V DC available with DG termination only
AC (internally full wave rectied)
24 = 24 V DC
115 = 115 V
DC
230 = 230 V DC
Coilconnector
DC: DG = DIN Connector (DIN 43650)
DS = Dual Spade SAEJ858a
DL = Leadwires (2) - 457mm (18")long
DW = Weather Pack Connector on leadwires - 241 mm (9.5") long
DK = Kostal connector
DT = 2-pole AMP Junior Timer plug
AC: AG = DIN Connector (DIN 43650)
cavity
FC12-2
dimensions
Formtools
Tool PartNo
Rougher FC12-2 in preparation
Finisher FC12-2 in preparation
millimeter (inch)
technical modications reserved
*StandardLineBodies
Code PartNo Material Ports Pressure
FH122-SB6 3053782 Steel, zinc-plated 3/4 BSP 420 bar
FH122-SS12 3053772 Steel, zinc-plated SAE-12 420 bar
FH122-AB6 3053843 Aluminium, clear anodized 3/4 BSP 245 bar
FH122-AS12 3053845 Aluminium, clear anodized SAE-12 245 bar
millimeter (inch)
technical modications reserved
perFormance
Pressure drop
Flow rate
Measured at n = 33 mm²/s
T
Oil
= 46 °C
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: [email protected]
The information in this brochure
relates to the operating conditions
and applications described.
For applications or operating
conditions not described, please
contact the relevant technical
department.
Subject to technical modications.
NOTE
thick
torque 4
+2
Nm
Standardmodels
Modelcode Stockno.
WS12Y-01-C-N-24DG 3157829
WS12Y-01-C-N-230AG 3157828
After loosening knurled nut,
coil can be rotated through
360° and removed
1 1/4 Hex
torque 100
±8 Nm
Manual override, option "M"
with HNBR-rubber cap
without m.o.