
E .0/12.10
538
Proportional
Flow Control Valve
Spool Type, Direct Acting,
Normally Closed
Metric Cartridge – 350 bar
PWK06020W
z Stepless adjustment of the effective oil ow, depending on the coil current.
z Excellent stability throughout ow range
z Excellent dynamic performance
z All exposed surfaces zinc-plated and corrosion-proof
z All valve parts made of high-strength steel with hardened and ground components to
ensure minimal wear and extended service life
z Coil seals protect the solenoid system
z Wide variety of connections available
Operating pressure: max. 350 bar
Nominal ow: max. 10 l/min
Internal leakage: max. 0.9 l/min (at 350 bar / 32 mm²/s)
Media operating temperature range: min. -30 °C to max. +100 °C
Ambient temperature range: min. -30 °C to max. +60 °C
Fluid: Hydraulic oil to DIN 51524 Part 1 + 2
Viscosity: min. 7.4 mm²/s to max. 420 mm²/s
Filtration: Class 19/17/14 to ISO 4406
or cleaner
MTTF
d
: 150 years
Installation: No orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and ground steel
Seals: NBR (standard)
FKM (optional,
temperature range
to -20 °C)
Back-up rings: PTFE
Cavity: Metric 06020
Weight: 0.46 kg
Control currents: 1750 mA; 4.1 Ohm (12V) /
850 mA; 18 Ohm (24V)
Dither frequency: 80 - 100 Hz
Hysteresis with dither: 4 - 6 % of nominal current
Repeatability: < 1 % of nominal current
Reversal error: < 1 % of nominal current
Response sensitivity: < 1 % of nominal current
Type of coil: Coil ... P...-50-1836
The PWK06020W is a normally closed,
direct-acting, proportional ow control
valve. It is non-compensated and its
function is to smoothly control the ow
from port 1 to port 2.
The energization of the coil reduces or
increases an orice cross-section and thus
controls the ow.
Together with a pressure compensator the
proportional ow control valve can be used
as a 2-way ow regulator – for example
when required to lift/lower variable loads at
the same velocity.
Up to 10 l/min
Up to 350 bar