E 5.904.2/12.10
448
4/2-Solenoid Directional Valve
SAE 8-Cartridge - 350 bar
WK08K-01
SPOOL Type - Direct Operated
15 l/min
350 bar
In the de-energized mode, the valve
allows ow from port 3 to 4 or 4 to 3 and
from port 2 to 1 or 1 to 2.
When energized, the valve allows ow
from port 3 to 1 while blocking 2 and 4.


All surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
Excellent switching performance by high power HYDAC solenoid
Low pressure drop due to CFD optimized ow-path

Operating pressure: 350 bar
Nominal ow: 15 l/min
Consult factory for ow ratings
above 207 bar
Internal leakage: 90 cm
3
/min max. at 250 bar and
34 mm
2
/s
Media operating temp. range: - 20 °C to + 120 °C
Ambient temp. range: - 20 °C to + 60 °C
Fluids: Hydraulic oil to DIN 51524 part 1 and 2
Viscosity: min. 7.4 mm²/s up to max. 420 mm²/s
Filtration: Class 21/19/16 according
to ISO 4406 or cleaner
Installation: optional
Material: Valve body: carbon steel
Spool: hardened and ground
steel
Seals: NBR (Standard)
FKM (Option)
Coil: Steel/Polyamide
Cavity: FC08-4
Weights: Valve complete: 0.38 kg
Coil only: 0.19 kg
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the
coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Pull-in voltage: ±15 % of nominal voltage
Coil duty rating: Continuous up to 115 %
of nominal voltage at 60 °C
ambient temperature
E 5.904.2/12.10
449


WK08K-01M-C-N-24DG
Designation
Directional spool valve UNF
Cavity 08
Function code K
Type 01 = standard
Option
Omission = No Option
M = Manual Override
BodyandPorts
C = Cartridge Only
Seals
N = NBR
V = FKM
CoilVoltage
DC
12 = 12 V DC
24 = 24 V DC
AC (internally full wave rectied)
115 = 115 V AC
230 = 230 V AC
other voltages on request
CoilConnector
DC: DG = DIN Connector to EN 175301-803
DK = Kostal threaded connection M27x1
DL = Leadwires (2) - 457mm, (18") long
DN = Deutsch connector, 2 pole
DT = AMP Junior Timer, 2-pole, radial
AC: AG = DIN Connector to EN 175301-803
other connection types on request

Pressure drop
Flow rate
Inlineconnectionhousings
Code PartNo.Material Ports Pressure
FH084-SB3 563383 Steel, zinc-plated 3/8 BSP 350 bar
FH084-AB3 3011407 Aluminium, clear anodized 3/8 BSP 245 bar
Millimeter (Inch)
Subject to technical modications.

FC08-4
Formtools
Tool PartNo
Rougher FC08-4 175646
Finisher FC08-4 175647
Measured at ν = 34 mm
2
/s
T
Oil
= 46 °C
Standardmodels
Modelcode PartNo.
WK08K-01-C-N-24DG 3021093
WK08K-01-C-N-230AG 3043933
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
The information in this brochure
relates to the operating conditions
and applications described.
For applications or operating
conditions not described, please
contact the relevant technical
department.
Subject to technical modications.
NOTE
After loosening moun-
ting nut, coil
can be rotated
through 360° and
removed.
7/8 hex
torque 25
+5
Nm
Manual override, with HNBR
rubber cup
torque 4
+2
Nm
thick
without M.O.
other models on request
other housings on request
Millimeter (Inch)
Subject to technical modications.