497
E 7.576.2/04.15
Inline Filter or
Pressure Filter for
Manifold Mounting HF4P
up to 450 l/min, up to 350 bar
1. TECHNICAL
SPECIFICATIONS
1.1 FILTER HOUSING
Construction
The lter housings are designed
in accordance with international
regulations. They consist of a lter
head and a screw-on lter bowl.
Standard equipment:
bypass valve
connection for a clogging indicator
1.2 FILTER ELEMENTS
HYDAC lter elements are validated
and their quality is constantly
monitored according to the following
standards:
ISO 2941
ISO 2942
ISO 2943
ISO 3724
ISO 3968
ISO 11170
ISO 16889
Filter elements are available with the
following pressure stability values:
Betamicron
®
(BN): 20 bar
Betamicron
®
(BH): 210 bar
Wire mesh (W): 20 bar
1.4 SEALS
NBR (=Perbunan)
1.5 Installation
Inline lter or manifold mounted lter
1.6 SPECIAL MODELS AND
ACCESSORIES
Without bypass valve
Without port for clogging indicator
1.7 SPARE PARTS
See Original Spare Parts List
1.8 CERTIFICATES AND APPROVALS
On request
1.9 COMPATIBILITY WITH
HYDRAULIC FLUIDS ISO 2943
Hydraulic oils H to HLPD DIN 51524
Lubrication oils DIN 51517, API,
ACEA, DIN 51515, ISO 6743
Compressor oils DIN 51506
Biodegradable operating uids
VDMA 24568 HETG, HEES, HEPG
Fire-resistant uids HFA, HFB, HFC
and HFD
Operating uids with high water
content (> 50 % water content)
on request
1.3 FILTER SPECIFICATIONS
Nominal pressure 420 bar
Fatigue strength At nominal pressure 10
6
cycles
from 0 to nominal pressure
Temperature range -30 °C to +100 °C
Material of lter head EN-GJS
Material of lter bowl Steel
Type of clogging indicator VD (differential pressure measurement
up to 420 bar operating pressure)
Pressure setting of the clogging indicator 5 bar (others on request)
Bypass cracking pressure 6 bar (others on request)
Symbol for hydraulic systems
9" 18"
E 7.576.2/04.15
27"
498
E 7.576.2/04.15
HF4P BN 09 G 3 C 1 . X /12 V-B6
Filter type
HF4P
Filter material of element
BN Betamicron
®
(BN)
BH Betamicron
®
(BH)
W Wire mesh
Size of lter or element
09 9"
18 18"
27 27"
Connection
G threaded port
F ange port
P manifold mounting
Filtration rating in µm
BN, BH : 3, 5, 10, 20
W : 25, 74, 149
Type of clogging indicator
W without port (no clogging indicator)
A steel blanking plug in indicator port
B visual
for other clogging indicators,
C electrical
see brochure no. 7.050../..
D visual and electrical
J electrical switch (Brad Harrison 5 Pin Mini)
J4 electrical switch (Brad Harrison 4 Pin Micro)
Type code
1
Modication number
X the latest version is always supplied
Supplementary details
no details = manifold mounting
0 BSPP 1½"
12 SAE-24-O-ring boss
16 SAE 1½" ange (210 or 420 bar )
B. bypass cracking pressure (e.g. B6 = 6 bar); without details = without bypass valve
L... light with appropriate voltage (24, 48, 110, 220 Volt) only for clogging indicator
LED 2 light emitting diodes up to 24 Volt type "D"
V FPM seals
W suitable for HFA and HFC emulsions
2. MODEL CODE (also order example)
2.1 COMPLETE FILTER
5.03.09 D 03 BN /-V
Size
09 9"
18 18"
27 27"
Type
D
Filtration rating in µm
BN, BH : 03, 05, 10, 20
W : 25, 74, 149
Filter material
BN, BH, W
Supplementary details
V (for descriptions, see Point 2.1)
2.2 REPLACEMENT ELEMENT
2.3 REPLACEMENT CLOGGING INDICATOR VD 5 D . X /-L24
Type of indicator
VD differential pressure indicator up to 420 bar operating pressure
Pressure setting
5 standard 5 bar, others on request
Type of clogging indicator
D (see Point 2.1)
Modication number
X the latest version is always supplied
Supplementary details
L..., LED, V, W (for descriptions, see Point 2.1)
499
E 7.576.2/04.15
3. FILTER CALCULATION /
SIZING
The total pressure drop of a lter at a
certain ow rate Q is the sum of the
housing ∆p and the element ∆p and is
calculated as follows:
∆p
total
= ∆p
housing
+ ∆p
element
∆p
housing
= (see Point 3.1)
∆p
element
= Q •
SK*
•
viscosity
1000 30
(*see Point 3.2)
For ease of calculation, our Filter
Sizing Program is available on request
free of charge.
NEW: Sizing online at www.hydac.com
3.1 ∆p-Q HOUSING CURVES BASED
ON ISO 3968
The housing curves apply to mineral oil
with a density of 0.86 kg/dm³ and
a kinematic viscosity of 30 mm²/s.
In this case, the differential pressure
changes proportionally to the density.
3.2 GRADIENT COEFFICIENTS (SK) FOR FILTER ELEMENTS
The gradient coefcients in mbar/(l/min) apply to mineral oils with a kinematic
viscosity of 30 mm²/s. The pressure drop changes proportionally to the change in
viscosity.
HF4P
HF4P BN BH W
3 µm 5 µm 10 µm 20 µm 3 µm 5 µm 10 µm 20 µm -
09 2.85 2.17 2.02 1.13 2.61 2.31 1.80 1.04 0.128
18 1.35 1.04 0.97 0.53 1.21 1.05 0.84 0.49 0.073
27 0.88 0.67 0.62 0.35 0.80 0.71 0.55 0.32 0.036
∆p [bar]
Q [l/min]
09 BN:
∆p [bar]
Q [l/min]
09 BH:
∆p [bar]
Q [l/min]
∆p [bar]
Q [l/min]
18 BN:
∆p [bar]
Q [l/min]
18 BH:
∆p [bar]
Q [l/min]
27 BN:
∆p [bar]
Q [l/min]
27 BH:
500
E 7.576.2/04.15
4. DIMENSIONS
NOTE
The information in this brochure relates to the operating conditions and applications
described.
For applications or operating conditions not described, please contact the relevant
technical department.
Subject to technical modications.
HYDAC Filtertechnik GmbH
Industriegebiet
D-66280 Sulzbach/Saar
Tel.: 0 68 97 / 509-01
Fax: 0 68 97 / 509-300
Internet: www.hydac.com
HF4P Weight incl.
element [kg]
09 26.94
18 35.97
27 47.90
port for clogging indicator
HF4P
INLET
As inline lter
vent screw
OUTLET
As manifold mounted lter
4 through-bores
for
mounting
drain
plug
port for clogging indicator
4 through-bores
for
mounting
drain
plug
INLET
OUTLET
vent screw