
E 5.921.2/12.10
346
Solenoid Directional Valve
SAE 10-Cartridge – 350 bar
2/2 Normally Open (Reverse Flow)
WS10YR-01
Poppet Type - Pilot Operated
75 l/min
350 bar
In the de-energized mode, the valve
allows ow in both directions.
When energized, the valve blocks ow
from port 2 to 1. In this mode the valve
will allow ow from port 1 to 2 after the
hydraulic force overcomes the solenoid
force of 2.5 to 10 bar.
Operating pressure: 350 bar
Nominal ow: 75 l/min
Internal leakage: leakfree (less than 5 drops/min)
at 350 bar
Media operating temp. range: -20 °C to +120 °C
Ambient temp. range: -20 °C to + 60 °C
Fluids: Hydraulic oil to DIN 51524 part 1 and 2
Viscosity: 7.4 to 420 mm²/s
Filtration: Class 21/19/16 according to ISO 4406
or cleaner
Installation: Optional
Material: Valve body: carbon steel
Piston: carbon steel
Seals: NBR (Standard)
FKM (Option)
Coil: Steel/Polyamide
Cavity: FC10-2
Weights: Valve complete: 0.37 kg
Coil only: 0.19 kg
Response time: Energized: 50 ms
De-energized: 35 ms
typical 24 V DC-coil
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Minimum pull-in voltage: 85 % of nominal
Coil duty rating: Continuous up to 115% of nominal
voltage at 60 °C ambient temperature
All surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
Excellent switching performance by high power HYDAC solenoid
Low pressure drop due to CFD optimized ow-path