Series HPF 60-450
4568 PSI
PRESSURE FILTER, manifold mounted
Sheet No. 1473 R
EDV 09/15
1) Connect the stand grounding tab to a suitable
earth ground point.
Dimensions: inches
Designs and performance values are subject to change.
Dimensions:
type HPF
60
HPF
90
HPF
150
HPF
170
HPF
240
HPF
360
HPF
450
connection ¾“ ¾“ ¾“ 1“ 1“ 1“ 1“
A 8.58 11.14 15.43 12.99 14.96 18.11 22.24
B 3.78 3.78 3.78 5.51 5.51 5.51 5.51
C 10.63 13.19 17.52 13.78 15.75 18.90 23.03
D 0.71 0.71 0.71 1.10 1.10 1.10 1.10
E 1.10 1.10 1.10 1.50 1.50 1.50 1.50
F 0.09 0.09 0.09 0.07 0.07 0.07 0.07
G 2.55 2.55 2.55 3.54 3.54 3.54 3.54
H 1.26 1.26 1.26 1.73 1.73 1.73 1.73
J 0.75 0.75 0.75 1.10 1.10 1.10 1.10
K 0.35 0.35 0.35 0.55 0.55 0.55 0.55
L 1.97 1.97 1.97 1.73 1.73 1.73 1.73
M 0.39 0.39 0.39 1.10 1.10 1.10 1.10
N 3.15 3.15 3.15 3.15 3.15 3.15 3.15
O 1.67 1.67 1.67 2.26 2.26 2.26 2.26
P 3.35 3.35 3.35 4.52 4.52 4.52 4.52
R 3.78 3.78 3.78 4.52 4.52 4.52 4.52
weight 12.1 lbs. 13.2 lbs. 15.4 lbs. 37.4 lbs. 39.6 lbs. 44.0 lbs. 50.6 lbs.
volume tank .08 Gal. .10 Gal. .16 Gal. .18 Gal. .23 Gal. .31 Gal. .42 Gal.
Pressure Filter
Series HPF 60-450
4568 PSI
Description:
Pressure filter series HPF 60-450 have a working
pressure up to 4568 PSI. Pressure peaks can be
absorbed with a sufficient safety margin. The HPF-
filters are flanged to the mounting-surface.
The filter element consists of star-shaped, pleated filter
material, which is supported on the inside by a
perforated core tube and is bonded to the end caps
with a high-quality adhesive. The flow direction is from
outside to inside. Filter elements are available down to
5 µm
(c)
. Finer filtration is available upon request.
Eaton filter elements are known for high intrinsic
stability and an excellent filtration capability, a high
dirt-retaining capacity and a long service life.
Eaton filter elements are suitable for all petroleum
based fluids, HW-emulsions, most synthetic hydraulic
fluids and lubrication oils.
Eaton filter elements are available up to a pressure
resistance of p 2320 PSI and a rupture strength ofp
3625 PSI.
The internal valve is integrated into the filter head.
After reaching the bypass pressure setting, the bypass
valve will send unfiltered partial flow around the filter.
The reversing valve provides another level of
protection for the filter element. The reverse flow will
not be filtered.
1. Type index:
1.1. Complete filter: (ordering example)
HPF. 90. 10VG. HR. E. P. -. F. 4. -. -. AE
1 2 3 4 5 6 7 8 9 10 11 12
1 series:
HPF = pressure filter, manifold mounted
2 nominal size: 60, 90, 150, 170, 240, 360, 450
3 filter-material and filter-fineness:
80G, 40G, 25G, 10G stainless steel wire mesh
25VG, 16VG, 10VG, 6VG, 3VG glass fiber
4 filter element collapse rating:
30 =
p 435 PSI
HR =
p 2320 PSI (rupture strength p 3625 PSI)
5 filter element design:
E = single-end open
6 sealing material:
P = Nitrile (NBR)
V = Viton (FPM)
7 filter element specification: (see catalog)
- = standard
VA = stainless steel
IS06 = for HFC applications, see sheet-no. 31601
8 process connection:
F = manifold mounted
9 process connection size:
4 = ¾“ (HPF 60-150)
5 = 1“ (HPF 170-450)
10 filter housing specification: (see catalog)
- = standard
IS06 = for HFC applications, see sheet no.31605
11 internal valve:
- = without
S1 =
with bypass valve
p 51 PSI
S2 =
with bypass valve
p 102 PSI
R = reversing valve, Q ≤ 18.50 GPM (HPF 60-150)
reversing valve, Q ≤ 55.75 GPM (HPF 170-450)
12 clogging indicator or clogging sensor:
- = without
AOR = visual, see sheet-no. 1606
AOC = visual, see sheet-no. 1606
AE = visual-electric, see sheet-no. 1615
VS5 = electronic, see sheet-no. 1619
To add an indicator to your filter, use the corresponding indicator data
sheet to find the indicator details and add them to the filter assembly
model code.
1.2. Filter element:
(ordering example)
01E. 90. 10VG. HR. E. P. -
1 2 3 4 5 6 7
1 series:
01E. = filter element according to company standard
2 nominal size: 60, 90, 150, 170, 240, 360, 450
3 - 7 see type index-complete filter
Technical data:
design temperature: 14 °F to +212 °F
operating temperature: 14 °F to +176 °F
operating medium mineral oil, other media on request
max. operating pressure: 4568 PSI
test pressure: 6525 PSI
process connection: manifold mounted
housing material: C-steel
sealing material: Nitrile (NBR) or Viton (FPM), other materials on request
installation position: vertical
Classified under the Pressure Equipment Directive 2014/68/EC for mineral oil (fluid group 2), Article 4, Para. 3.
Classified under ATEX Directive 2014/34/EC according to specific application (see questionnaire sheet-no. 34279-4)
Pressure drop flow curves:
Filter calculation/sizing
The pressure drop of the assembly at a given flow rate Q is the sum of the housing ∆p and the element ∆p and is calculated as follows:
p
assembly
=
p
housing
+
p
element
p
housing
= (see
p
= f (Q) - characteristics)
p
element
(PSI) =











.


³
For ease of calculation our Filter Selection tool is available online at www.eatonpowersource.com/calculators/filtration/
Material gradient coefficients (MSK) for filter elements
The material gradient coefficients in PSI/GPM apply to mineral oil (HLP) with a density of 0.876 kg/dm³ and a kinematic viscosity of
139 SUS (30 mm²/s). The pressure drop changes proportionally to the change in kinematic viscosity and density.
HPF VG G
3VG 6VG 10VG 16VG 25VG 25G 40G 80G
60 6.748 4.685 2.999 2.577 1.760 0.2002 0.1868 0.1280
90 4.059 2.818 1.804 1.550 1.059 0.1210 0.1130 0.0774
150 2.422 1.681 1.076 0.925 0.632 0.0723 0.0675 0.0462
170 2.714 1.884 1.206 1.036 0.708 0.0839 0.0783 0.0537
240 2.092 1.452 0.930 0.799 0.546 0.0651 0.0607 0.0416
360 1.530 1.062 0.680 0.584 0.399 0.0475 0.0444 0.0304
450 1.126 0.782 0.500 0.430 0.294 0.0349 0.0326 0.0223
∆p = f(Q) – characteristics according to ISO 3968
The pressure drop characteristics apply to mineral oil (HLP) with a density of 0.876 kg/dm³. The pressure drop changes proportionally
to the density.
Symbols:
without indicator with electric
indicator
AE 30 and AE 40
with visual-electric
indicator
AE 50 and AE 62
with visual-electric
indicator
AE 70 and AE 80
with visual
indicator
AOR/AOC
with electronic
clogging sensor
VS5
filter without
internal valve
filter with
by-pass valve
filter with
reversing valve
Spare parts:
item qty. designation dimension and article-no.
HPF 60-150 HPF 170-450
1 1 filter element 01E.60… - 01E.150… 01E.170… - 01E.450…
2 1 O-Ring 22 x 3,5 304341 (NBR)
304392 (FPM)
34 x 3,5 304338 (NBR)
304730 (FPM)
3 1 O-Ring 54 x 3 304657 (NBR)
304720 (FPM)
75 x 3 302215 (NBR)
304729 (FPM)
4 1 support ring 61 x 2,6 x 1 304660 81 x 2,6 x 1 304581
5 2 O-Ring 22 x 3 304387 (NBR)
304931 (FPM)
33,3 x 2,4 304380 (NBR)
314706 (FPM)
6 1 clogging indicator, visual AOR or AOC see sheet-no. 1606
7 1 clogging indicator, visual-electric AE see sheet-no. 1615
8 1 clogging sensor, electronic VS5 see sheet-no. 1619
9 1 O-Ring 15 x 1,5
315357 (NBR)
315427 (FPM)
10 1 O-Ring 22 x 2
304708 (NBR)
304721 (FPM)
11 1 O-Ring 14 x 2
304342 (NBR)
304722 (FPM)
12 1 srew plug 20913-4 309817
item 12 execution only without clogging indicator or clogging sensor
Test methods: Filter elements are tested according to the following ISO standards:
ISO 2941 Verification of collapse/burst resistance
ISO 2942 Verification of fabrication integrity
ISO 2943 Verification of material compatibility with fluids
ISO 3723 Method for end load test
ISO 3724 Verification of flow fatigue characteristics
ISO 3968 Evaluation of pressure drop versus flow characteristics
ISO 16889 Multi-pass method for evaluating filtration performance
North America
44 Apple Street
Tinton Falls, NJ 07724
Toll Free: 800 656-3344
(North America only)
Tel: +1 732 212-4700
Europe/Africa/Middle East
Auf der Heide 2
53947 Nettersheim, Germany
Tel: +49 2486 809-0
Friedensstraße 41
68804 Altlußheim, Germany
Tel: +49 6205 2094-0
An den Nahewiesen 24
55450 Langenlonsheim, Germany
Tel: +49 6704 204-0
China
No. 3, Lane 280,
Linhong Road
Changning District, 200335
Shanghai, P.R. China
Tel: +86 21 5200-0099
Singapore
4 Loyang Lane #04-01/02
Singapore 508914
Tel: +65 6825-1668
Brazil
Av. Julia Gaioli, 474 – Bonsucesso
07251-500 – Guarulhos, Brazil
Tel: +55 11 2465-8822
For more information, please
email us at
filtration@eaton.com
or visit
www.eaton.com/filtration
© 2015 Eaton. All rights reserved. All trademarks and
registered trademarks are the property of their respective
owners. All information and recommendations appearing in
this brochure concerning the use of products described herein
are based on tests believed to be reliable. However, it is the
user’s responsibility to determine the suitability for his own
use of such products. Since the actual use by others is
beyond our control, no guarantee, expressed or implied, is
made by Eaton as to the effects of such use or the results to
be obtained. Eaton assumes no liability arising out of the use
by others of such products. Nor is the information herein to be
construed as absolutely complete, since additional information
may be necessary or desirable when particular or exceptional
conditions or circumstances exist or because of applicable
laws or government regulations.