EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009G-430.A
An Eaton Brand
G
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Operation
When a higher pressure is
sensed at inlet 1 than at inlet 2
the ball within the cartridge is
forced against a seat opening
the higher pressure to outlet.
Pressure Drop
Description
This valve provides a means
of sensing the higher pres-
sures between two lines on
a hydraulic circuit allowing
this line to be used for an
auxiliary function such as the
removal of a mechanically
applied brake, the operation
of a gauge or to give a remote
pressure sensing line for the
control of a separate valve.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Maximum pressure 210 bar (3000 psi) Aluminum housing
350 bar (5000 psi) Steel housing
Rated flow 6 series - 11 L/min (3 USgpm)
8 series - 24,6 L/min (6.5 USgpm)
12 series - 88,9 L/min (23.5 USgpm)
16 series - 170,3 L/min (45 USgpm)
Internal leakage Between ports 2 to 1, and 2 to 3
<5 drops/min @ 210 bar (3000 psi)
Temperature range -40°C to +120°C (-40° to + 248°F)
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or steel
Weight 6 series w/aluminum housing 0,10 kg (0.22 bs)
w/steel housing 0,30 kg (0.66 lbs)
8 series w/aluminum housing 0,28 kg (0.62 lbs)
w/steel housing 0,90 kg (1.86 lbs)
12 series w/aluminum housing 0,75 kg (1.65 lbs)
w/steel housing 2,25 kg (4.95 lbs)
16 series w/aluminum housing 1,76 kg (3.86 lbs)
w/steel housing 5,25 kg (11.58 lbs)
Seals (2 required) 6 series 154128 (Buna-N) / 396096 (Viton
®
)
8 series 154129 (Buna-N) / 396098 (Viton
®
)
12 series 154131 (Buna-N) / 396102 (Viton
®
)
16 series 154132 (Buna-N) / 396105 (Viton
®
)
Viton is a registered trademark of E. I. DuPont
Performance DataSectional View
When the higher pressure
appears at inlet 2 the ball is
forced against the other seat
which blocks inlet 1 and opens
up inlet 2 to outlet.
DSV3 ** B - Shuttle Valve
Ball Type, In-line Housing
Up to 170 L/min (45 USgpm) • 350 bar (5000 psi)
Pressure Drop
ABCD
3
1
2
P2
P1
Outlet
18
75
100
90
80
70
60
50
40
30
20
10
0
4 8 12 16 20 24
1
2
3
10620 14 18 22
A
B
C
D
5 15 25 35 45 55 65 85 95
6
5
4
3
2
1
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
Pressure Drop - bar
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 G-431.A
An Eaton Brand
G
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
DSV3 ** B - Shuttle Valve
Ball Type, In-line Housing
Up to 170 L/min (45 USgpm) • 350 bar (5000 psi)
Cartridge Only
Basic Code
DSV3
Dimensions
mm (inch)
Model Number A B C D E F
DSV3-6-B-A1 22,2 (0.87) 44,5 (1.75) 19,0 (0.75) 9,5 (0.37) 25,4 (1.00) 9,5 (0.37)
DSV3-6-B-S1 22,2 (0.87) 44,5 (1.75) 20,6 (0.81) 10,3 (0.41) 31,7 (1.25) 12,7 (0.50)
DSV3-8-B-A2 23,8 (0.94) 47,6 (1.87) 25,4 (1.00) 12, 7 (0.50) 38,1 (1.50) 12,7 (0.50)
DSV3-8-B-S2 23,8 (0.94) 47,6 (1.87) 31,7 (1.25) 15,9 (0.63) 43,7 (1.72) 15,9 (0.63)
DSV3-8-B-A6T 23,8 (0.94) 47,6 (1.87) 25,4 (1.00) 12, 7 (0.50) 38,1 (1.50) 12,7 (0.50)
DSV3-8-B-S6T 23,8 (0.94) 47,6 (1.87) 31,7 (1.25) 15,9 (0.63) 43,7 (1.72) 15,9 (0.63)
DSV3-12-B-A4 31,7 (1.25) 63,5 (1.50) 38,1 (1.50) 19,1 (0.75) 50,8 (2.00) 19,1 (0.75)
DSV3-12-B-S4 31,7 (1.25) 63,5 (1.50) 43,7 (1.72) 21,8 (0.86) 57,5 (2.25) 22,2 (0.88)
DSV3-12-B-A8T 31,7 (1.25) 63,5 (1.50) 38,1 (1.50) 19,1 (0.75) 50,8 (2.00) 19,1 (0.75)
DSV3-12-B-S8T 31,7 (1.25) 63,5 (1.50) 43,7 (1.72) 21,8 (0.86) 57,5 (2.25) 22,2 (0.88)
DSV3-16-B-A6 47,6 (1.88) 95,3 (3.75) 47,6 (1.88) 23,8 (0.94) 63,5 (2.50) 23,8 (0.97)
DSV3-16-B-S6 47,6 (1.88) 95,3 (3.75) 50,0 (1.97) 25,0 (0.98) 62,7 (2.47) 25,4 (1.00)
DSV3-16-B-A12T 47,6 (1.88) 95,3 (3.75) 47,6 (1.88) 23,8 (0.94) 63,5 (2.50) 23,8 (0.97)
DSV3-16-B-S12T 47,6 (1.88) 95,3 (3.75) 50,0 (1.97) 25,0 (0.98) 62,7 (2.47) 25,4 (1.00)
Aluminum
housings can be
used for pressures
up to 210 bar (3000
psi). Steel housings must be
used for operating pressures
above 210 bar (3000 psi).
1 Function
DSV3 - Shuttle Valve
2 Size
6 - 6 Size
8 - 8 Size
12 - 12 Size
16 - 16 Size
3 Seals
Blank - Buna-N
V - Viton
4 Style
B - Ball
5 Housing Material
A - Aluminum
S - Steel
6 Port Size
6 Series
1 - 1/8" NPTF
8 Series
2 - 1/4" NPTF
6T - SAE 6
12 Series
4 - 1/2' NPTF
8T - SAE 8
16 Series
6 - 3/4" NPTF
12T - SAE 12
Model Code
1 2 3 4 5 6
DSV3
**
** ***
(V)
B
– – – –
A
B
E
D
C
F
A
B
E
D
C
F
