G-72
G
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001
-E—January 20
18 www.eaton.com
Operation
When a higher pressure is
sensed at inlet 1 than at inlet
2the ball within the cartridge
is forced against a seat
opening the higher pressure
to outlet. When the higher
pressure appears at inlet 2 the
ball is forced against the other
seat which blocks inlet 1 and
opens up inlet 2 to outlet.
Pressure dropDescription
This valve provides a means of
sensing the higher pressures
between two lines on a
hydraulic circuit allowing
this line to be used for an
auxiliary function such as the
removal of a mechanically
applied brake, the operation
of a gauge or to give a remote
pressure sensing line for the
control of a separate valve.
Performance data
Sectional view
Features
Cartridge design enabling
speedy servicing when
mounted in a body or in a
composite manifold.
1SH10 - Shuttle valve
Ball type
20 L/min (5 USgpm) 350 bar (5000 psi)
3
1
2
Outlet
(2)
Inlet (1)
Inlet (3)
0
0.7
1.4
2.1
2.8
3.5
02.55 7.5 10 12.5 15 17.5 20 22.5
0
10
20
30
40
50
0.0 0.7 1.3 2.0 2.6 3.3 4.0 4.6 5.3 5.9
Flow - US gpm
Flow - L/min
Pressure - psi
Pressure - bar
Ratings and specifications
Figures based on: Oil Temp = 40°C Viscosity = 32 cSt (150 SUS)
Rated flow 20 L/min (5 USgpm)
Max Pressure 350 bar (5000 psi)
Cartridge Material Working parts hardened and ground steel.
External steel surfaces zin c plated
Mountin g position
Unrestricted
Cavity Number
A16927 (See Section M)
Torque Cartridge into Cavity 8-10 Nm (Use Loc-Tite 542)
Weight 0.05 kg (0.11 lbs)
Recommended Filtration level BS5540/4 C lass 18/13 (25 micron nominal)
Operating Temp -30°C to +90°C (-22° to +194°F)
Leakage 0.6 milliliters/min max
Nominal Viscosity Range 5 to 500 cSt
G-73
G
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001
-E—January 20
18 www.eaton.com
Model code
1SH10 - Shuttle valve
Ball type
20 L/min (5 USgpm) 350 bar (5000 psi)
ote:N Using LOC-TITE 542, torque
cartridge to 8-10 Nm against the
bottom of the cavity.
5.00 A/F
Inlet (3)
M10 x 1.0
Outlet (2)
Inlet (1)
16.0
(0.63)
1
Basic code
1SH10 - Cartridge Only
Cartridge only
Basic code
1SH10
Dimensions
mm (inch)
1SH10
1