Page PD64
PROPORTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 7 / 2017
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, solenoid operated, 4 way 3 position, Motor Spool, proportional directional
valve.
OPERATION
EG-S4M, when de-energized, blocks ow at (2) and allows ow between (1), (3) and (4). When coil (S1) is
energized, ow is allowed from (3) to (4), and from (2) to (1). When coil (S2) is energized, ow is allowed from (3)
to (2), and from (4) to (1). Flow is proportional to the current applied to the coil. A compensator must be used to
create a pressure compensated ow control function.
FEATURES
• Hardened parts for long-life.
• Industry common cavity.
• Excellent linearity and low hysteresis characteristics.
• Cartridges are voltage interchangeable.
• Optional coil voltages and terminations available.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
Pressure Compensation from inlet to work port



0 200 600
10
5
15
800
Current (mA)
Flow vs. Current
20
25
Flow (l/min)
30
1200
From 2 to 3
1000
600400
From 2 to 1
Pressure Compensation from inlet to work port



0 200 600
10
5
15
800
Current (mA)
Flow vs. Current
20
25
Flow (l/min)
30
1200
From 2 to 3
1000
600400
From 2 to 1
Flow Range See curves for various versions
Max System Pressure 3500 PSI (241 bar)
Leakage 15 cu-in/min
250 cc/min bar @ 210 bar
Hysteresis ±5%
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -30°C / +100°C
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Coil Nut Torque Requirements 2-3 ft-lbs (3-4 Nm)
Cavity DELTA 4W
Cavity Tools Kit
(form tool, reamer, tap) 40500002
Current Supply Characteristics PWM (Pulse Width Modulation)
Rated Current Range 400-1400 mA
PWM or Super-Imposed
Dither Frequency 100-200 Hz
Coil Resistance (12 VDC) 7.2 Ohm ±5% at 68°F (20°C)
EG-S4M 4 WAY 3 POSITION, MOTOR SPOOL, PROPORTIONAL DIRECTIONAL VALVE
COIL SPECIFICATIONS
VALVE SPECIFICATIONS
HYDRAULIC SYMBOL
PERFORMANCE
Flow (l/min)
Current (mA)
Flow vs. Current
Coil 12 VDC - 130 Hz PWM - Oil 26 cSt (121 SSU) @ 50°C (104°F)
(3) (1)
(2) (4)
Page PD65
PROPORTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 7 / 2017
S4P
S4M
Pressure Drop vs. Flow


S2
S1





Pressure Compensation from inlet to work port



0 200 600
10
5
15
800
Current (mA)
Flow vs. Current
20
25
Flow (l/min)
30
1200
From 2 to 3
1000
600400
From 2 to 1
DIMENSIONS
(for bodies style and sizes see section “Accessories”)
ORDERING INFORMATION
NOTES: for other seals, consult factory.
Approximate Coil Weight: .47 lbs (.21 kg)
EG-S4M – – – –
OPTIONS BODIES
Buna Standard B0 Up to 22 l/min Blank Without Body
N 3/8” BSP Ports
S #6 SAE Ports
VOLTAGE
12 12 VDC
24 24 VDC
“L” COIL TERMINATION
HC DIN 43650 (Hirschmann)
DT Deutsch-Integral DT04-2P
Pressure Drop vs. Flow
Coil 12 VDC - 130 Hz PWM - Oil 26 cSt (121 SSU) @ 50°C (104°F)
Pressure Compensation from Inlet to Work Port
Coil 12 VDC - 130 Hz PWM - Oil 26 cSt (121 SSU) @ 50°C (104°F)
Regulated Flow (l/min)
Differential Pressure (bar)
Flow (l/min)
Pressure Drop (bar)
S4P
S4M
Pressure Drop vs. Flow


S2
S1




