
SV - Solenoid Valves
SV - 44
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
1to2
De-energized
2to1
Energized
174 12
131 9
687
44 3
00
psi bar
2.6 5.3 10.6 13.2 18.5
US gal/min
50403020100
l/min
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
Pressure drop
7060
15.9
18261
218 15
7.9
This is a normally-closed, pilot-operated, poppet-type 10-size solenoid
valve with free reverse ow. When de-energized, the valve acts as a
check valve, allowing ow from port 1 to port 2, and blocking ow from
port 2 to port 1. When energized, the valve’s poppet is shifted and
allows ow from port 2 to port 1, and from 2 to 1. This valve is available
with an optional pull-type manual override.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
80 l/min
[21 US gal/min]
Leakage 6 drops/min @
Rated pressure
Weight 0.43 kg [0.95 lb]
Cavity SDC10-2
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
2-Way Poppet
SVP10-NCR
This valve is designed for low leakage applications and can be used in
a circuit with a single acting cylinder to control motion, provide load
holding or as a general purpose diverter or dump valve. The SVP10-
NCR can operate at an inlet pressure of 315 bar on port 2 for 250,000
cycles.
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with Standard Coil,
Deutsch Connector
SVP10-NCR