
1/6
Type series: W1F_B… (installation shallow)
Reference: 400-P-110119-EN-01/03.2023
- Slip-in cartridge valve
- For cavity AC
- All external parts with zinc-nickel plating according to
DIN EN ISO 19598
- Guided valve spool and poppet
- With or without manual override
- As an option, hand lever can be tted to solenoid
- De-energized closed
- The slip-on coil can be rotated, and it can be replaced
without opening the hydraulic envelope
- High pressure wet-armature solenoids
- Various plug-connector systems and voltages are
available
Directional valve
3-way/2-position
Q
max
= 40 l/min, p
max
= 315 bar
switching solenoid, direct acting, poppet type
Type series: W1F_B… (installation shallow)
Description
The 3-way/2-position solenoid-operated directional
seat valves, series W1F_B… (installation shallow), are
size 6, direct acting, and pressure balanced screw-
in valves. They are designed on the tried and tested
principle of the guided poppet, and the guide spool
has a seal. This valve type has an overlapped spool.
In the crossover position, all connections are thus dis-
connected, i.e., there is no connection between ports
1, 2, and 3 during the valve’s switching period, with the
result that only a minimal loss of the ow/pressure oc-
curs. This is a very important benet in small-volume
circuits, and in accumulator- and clamping systems.
This type is the "shallow" installation version, which ts
into the cavity type according to the AC factory stan-
dard. For the "deep" installation version, see separate
data sheet. These cartridge seat valves are also avai-
lable with or without manual override, and with the
option of an additional hand lever. All external parts of
the cartridge are zinc-nickel plated, and are thus sui-
table for use in the harshest operating environments.
The slip-on coils can be replaced without opening the
hydraulic envelope and can be positioned at any ang-
le through 360°. These valves are predominantly used
in certain mobile and industrial applications where le-
ak-tight shut-o functions are crucially important. Ex-
amples are where loads, tensions, or clamping forces
must be held without leakage. For self-assembly, plea-
se refer to the section related data sheets.
Symbol
Without manual override (standard)
With manual override