
1 / 8 Classification: 430.30.30.10
Reference: 100--P--000044--E--05 / 12.04
2- and 3-Way Flow Control Valves
Series SR3C
1 General
1.1 Product description
SR3C... flow control valves are used to
control the operating speed of motors
and cylinders, the speed being load--
independent i.e. pressure compensa-
ted. The flow rate is varied by means of
a slit--type orifice that is actuated by a
proportional solenoid.
The valve can be used as either a
2--way or 3--way flow control. When
used as a 3--way valve, either the con-
trolled flow (priority) port or the surplus
flow port can be at the higher pressure.
The special orifice layout ensures that
the flow setting is largely independent
of the viscosity of the operating fluid.
Thanks to the cartridge design, a com-
plete valve can be replaced very
quickly when necessary.
1.2
Advantages
S compact design
S flow rates are unaffected by tempe-
rature changes
S flow rates are unaffected by reversal
of the pressure differential between
the outlet ports
S where customers manufacture their
own manifold blocks, the flow control
valves can be ordered separately
S easy to service
S several types of manual overrides
S reliable
2 Symbols
2.1 2-way flow controller
PA
2.2 3-way flow controller
PA
B
3 Technical data
3.1 General
Type cartridge valve with
slit--type orifice and parallel/series connected
pressure compensator (hydrostat)
Flow direction P --> A controlled flow
P --> B surplus flow
Seals Viton (FPM)
Mounting method screw--in valve (M
A
=50Nm)
De--energised condition orifice closed
Mounting attitude unrestricted but preferably with solenoid
underneath (automatic air bleed)
Commissioning bleed all air from the system (if possible,
operate valve several times under ’no load’)