6.1.1E
P 1/2
Aenderungen vorbehalten
subject to change
droits de modification réservé
con riserva di cambiamenti tecnici
16.03.2001
RS 16/32 Pipe rupture valve
6.1 General:
• Type: direct operated seat valve
• Mounting method: screw-type cartridge
• Ports: P, Z see point 10
• Mounting position: any
• Flow direction: P è Z free flow
Z è P closing direction
• Weight: see point 10
• for protecting hydraulic consumers
• for direct installation in cylinders
4.1 If, when the oil is flowing from Z to P, the pressure difference in
the valve exceeds a value that corresponds to the preloading
pressure (approx. 1 bar), the poppet is forced into the conical
seat and seals the opening passage.
4.2 The pipe rupture valve is opened again automatically when the
pressure at port P is higher than that at port Z.
• prevents uncontrolled movement of the cylinder if a pipe or a
hose burst occurs
• settable closing flow
1. General description
3. Application
• either almost leakfree closing or slow lowering
• minimal spatial requirement thanks to compact design
2. Advantages of Beringer's pipe rupture valve
4. Functional description, sectional view
6. Characteristics
• This valve must only be used for the purpose for which it has
been designed.
• It must only be adjusted by trained staff.
• The hydraulic system must be depressurized and checked
before the valve is dissasembled.
• The valve must not be opened without the express permission
of the manufacturer.
7. Safety instructions
• Observe all port designations.
• Protect seals and flange surfaces against becoming damaged.
• Observe the tightening torques (see dimension diagram).
• Bleed the hydraulic system before putting it into operation.
8. Assembly instructions
5. Symbol
Z
P
1. Realease the locking pin.
2. Unscrew the setting ring until the poppet sits on the seat.
3. Set the flow acc. to the setting diagrams (see section 11).
4. Tighten the locking pin to the specified torque (see section 10).
9. Adjustment instructions
(Please contact Beringer if machinery is required for use beyond these
tolerances)
Z
P
poppet locking pin
setting ring
6.2 Hydraulic characteristic:
• Size: 16 / 32
• Min. settable
closing flow: 10 l/min / 100 l/min
• Max. settable
closing flow: 130 l/min / 400 l/min
• Max. working pressure: up to 480 bar.
• Hydraulic medium: mineral oil per DIN 51524 and
DIN 51525 (HL/HLP),
inquire about other media
• Hydraulic medium
temperature range: -20°C...+80°C,
Inquire about other temperatures
• Viscosity range: 2.8 mm
2
/s up to 380 mm
2
/s
• Filtering: NAS 1638 class 9, β10 ≥ 75.
6.1.1E
P 2/2
Aenderungen vorbehalten
subject to change
droits de modification réservé
con riserva di cambiamenti tecnici
16.03.2001
10. Dimension diagram
11. Setting diagrams
12. Type code
*) E3/4 = threaded connection G3/4"
E1 = threaded connection G1"
DB = lowering bore in the closing poppet
K = copper ring instead of bonded seal for HFD fluids
RS 16
RS 32
RS 16 /E 3/4"
RS 16 /E 1"
a
b
dc
A/F
Z
P
ø f
ø e
Z
A/F
P
a
bc
RS 16 = A/F 2.5
(MA = 2.5 Nm)
RS 32 = A/F 4
(MA = 10 Nm)
with lowering
bore DB on request
(RS 16 = ø1.5
RS 32 = ø2.5)
+1
0
measured at 33 mm
2
/s
Closing flow [l/min]
0 40 80 120 160
0
1,5
3
4,5
6
Rotations setting ring
130
RS 16 + 16E
0 100 200 300 400
0
1
2
3
4
5
6
7
8
9
Closing flow [l/min]
Rotations setting ring
RS 32
bonded seal
bonded seal
RS RS
/
RS
Pipe
rupture valve
16 16
32 32
Size
Settable closing flow
.... ....
(must be min. 40% above max. working flow)
/
E3/4 E3/4
E1 E1
DB DB
K K
Option *)
Type max. closing P Z A/F a b c d e f bonded seal weight
flow [l/min] [kg]
RS 16 130 G3/4 G3/4 36 141 127 14 - - - 28.7 x 37.0 x 2.0 0.8
RS 32 400 G11/2 G11/2 70 253 233 20 - - - 48.7 x 59.0 x 3.0 5.5
RS 16/E3/4" 130 G3/4 G11/4 50 110 57 28 10 ø49 ø35 42.7 x 53.0 x 3.0 0.8
RS 16/E 1" 130 G1 G11/4 50 110 57 28 10 ø49 ø35 42.7 x 53.0 x 3.0 0.8