1 / 6 Classification: 4.30.30.40.20
Reference: 170-P-051000-E-08 / 08.15
Check Valves, Size 04 ... 40
Spherical Poppet-type, Screw-in Design
Series RKVE ... 360 l/min, 350 bar (500 bar)
1
General
1.1 Product description
Series RKVE units are screw-in check
valves with mounting threads ranging
from G 1/8" to G 1-1/2". For other
thread forms, contact Bucher
Hydraulics.
The cavities are identical to those used
by the RKVG valve (REG-02 cavity only)
and RVE valve (REG-01 & REG-02).
The valves prevent flow in the screw-in
direction (B A). In the opposite
direction, there is a range of opening
pressures from 0.2 to 2 bar.
For opening pressures larger than
2 bar, the RVVE-… longer-body
versions of the valves are available; see
data sheet 170-P-051010-E).
The units are spring-closed spherical
poppet valves with hardened body,
poppet and seat. The properties of the
sealing faces have been enhanced by
mechanical processing.
An external O-ring seals the leakage
path between the valve and cavity wall.
Please note that the two types of cavity
use different O-ring sizes !
Additional exists a variant with a
metalic sealing edge for the cavity type
REG-02 (size 04 to 16).
The valves can be used for pressure
relief in the opening direction, but only
to a limited extent (consult Bucher
Hydraulics for such applications).
1.2
A
dvantages
Virtually leak-free
High pressure rating
Compact construction
Spring is enclosed
(up to size 16)
Various opening pressures
Damped and undamped models
2 Main characteristics
Designation check valve / non-return valve
Design spherical poppet design
Mounting method screw-in cartridge
Size nominal 4...40 mm. See Table in section 5, Dimensions
Dimensions see Table in section 5, Dimensions
Mounting attitude unrestricted
No-flow direction B A (see symbol)
Operating pressure range ... 350 bar (for 500 bar, contact Bucher Hydraulics)
Opening pressure 0.2 ... 2 bar
Flow rate, Q max. ... 360 l/min
Fluid HL and HLP hydraulic oils to DIN 51524
Temperature range -30°C... +80°C
Viscosity range 10... 500 mm²/s (cSt)
Min. fluid cleanliness 18/14 to ISO 4406 / CETOP RP70H, 8…9 to NAS 1638
For applications outside these parameters, please contact Bucher Hydraulics.
170-P-051000-E-08/ 08.15 2 / 6
3 Schematic section 4 Components
Size 04 – 16 (REG-01 and REG-02)
Size 04 – 16 (REG-02)
Size 25 – 40 (REG-01)
Item Qty. Description
1 1 Valve body
2 1 Valve seat
3 1 Valve poppet
4 1 Spring
5 1 O-ring
6 1 Guide bush
Item Qty. Description
1 1 Valve body
2 1 Valve seat
3 1 Valve poppet
4 1 Spring
5 1 O-ring
Item Qty. Description
1 1 Valve body
2 1 Valve seat
3 1 Valve poppet
4 1 Spring
170-P-051000-E-08/ 08.15 3 / 6
5 Dimensions
5.1 Valve
Q Nom
=Qmax
(l/min)
G
ØD
H
X
O-ring for
cavity type
REG-01
O-ring for
cavity type
REG-02
Tighteni
ng
torque
OR
(Nm)
Tighteni
ng
torque
DK118
(Nm)
Pin
spanner
Type
RKVE-04-… 8 G1/8“ 8.5 10.0 5.0 6.2 x 1.0 6 x 0.8 3 8 M-04
RKVE-06-… 15 G1/4” 11.5 11.3 5.0 8.5 x 1.5 8 x 1.25 7 20 M-06
RKVE-08-… 30 G3/8” 14.9 13.3 7.0 12 x 1.5 12 x 1.0 15 25 M-08
RKVE-10-… 50 G1/2” 18.7 15.9 8.5 16 x 1.5 16 x 1.0 30 40 M-10
RKVE-16-… 80 G3/4” 24.2 18.9 10.0 20 x 2.0 20 x 1.5 60 60 M-16/MKS-16
RKVE-25-… 140 G1” 30.2 23.0 12.5 25 x 2.5 - 120 - M-25/MKS-25
RKVE-32-... 240 G1
1
/
4
” 39.1 36.0 21.5 34 x 2.5 - 200 - MKS-32
RKVE-40-... 360 G1
1
/
2
” 44.5 42.0 27.0 40 x 2.5 - 300 - MKS-40
170-P-051000-E-08/ 08.15 4 / 6
5.2 Cavity
5.21 Cavity type REG-01 5.22 Cavity type REG-02
G
ØK
Ød
Y
1
H
1
RKVE-04-... G1/8” 8.7 4.0 4.0 10.0
RKVE-06-... G1/4” 11.75 6.0 5.0 11.5
RKVE-08-... G3/8” 15.25 8.0 5.0 13.5
RKVE-10-... G1/2” 19.0 11.0 6.0 16.0
RKVE-16-... G3/4” 24.5 15.0 7.0 19.0
RKVE-25-... G1” 30.5 20.0 10.0 23.0
RKVE-32-… G1
1
/
4
” 39.5 26.0 12.0 36.0
RKVE-40-… G1
1
/
2
” 45.0 33.0 12.0 42.0
G
ØK
OR118
Ød
DK118
Ød
Y
H
RKVE-04-... G1/8” 8.7 4.0 6.0 2.5 10.0
RKVE-06-... G1/4” 11.75 6.0 8.0 4.0 11.5
RKVE-08-... G3/8” 15.25 8.0 11.5 4.0 13.5
RKVE-10-... G1/2” 19.0 11.0 15.5 4.5 16.0
RKVE-16-... G3/4” 24.5 15.0 20.0 6.0 19.0
6 Performance graphs
measured with oil viscosity 33 mm²/s (cSt)
170-P-051000-E-08/ 08.15 5 / 6
7 Ordering details
Model code key Ex. R K V E - _ - __ - __ - ___ - ____ - ______
Check valve, screw-in type
K = spherical poppet
Thread
Whitworth pipe thread G
Metrical thread M
UNF thread U
Nominal size
04
06
08
10
16
25
32
40
Opening pressure
0.2 bar 02
0.5 bar 05
1 bar 1
2 bar
2
Damping
Size 04, 06, 08, 10, 16 – damped Z4
Size 10, 16 – undamped Z2
Size 25, 32, 40 (blank)
O-rings
Nitrile (blank)
Viton V
For flat-bottomed cavity (blank)
For 118° cavity OR118
For metalic sealing edge DK118
Contact Bucher Hydraulics for further advice on:
- other opening pressures
- special materials
- customised designs
8 Design and installation notes
The installation dimensions and toler-
ances must be maintained.
Use the specified tightening torque
when fitting the valve.
Referring to the free-flow direction,
nozzles and orifices must not be situ-
ated directly before the check valve
(see Data Sheet 170-P-059000-E).
When fitting the valve, take particular
care to ensure that:
the valve is firmly seated on the
sealing surface, but that
valve components are not defor-
med by the use of excessive force
Recommendation: before installing the
valve, fit the O-ring in the cavity.
We offer form tools for hire or sale.
Special fitting tools (pin spanners) are
available for sale.
170-P-051000-E-08/ 08.15 6 / 6
9 Application notes
The maximum operating pressure must
not be exceeded and any pressure
peaks must be taken into consideration.
The specified nominal flow rate must
not be exceeded.
In applications such as accumulator
circuits, where sudden pressure can
be applied to the valve in the free-flow
direction, ensure that the specified
flow ratings are not exceeded. In
dynamic accumulator circuits, use the
internally damped valves.
Buyers bear the sole responsibility for
ensuring that the selected products are
suitable for their applications. Buyers
normally establish this by undertaking
qualification programs on test stands,
or by evaluating the performance of
prototype machines or systems.
10 Pin spanners
A A
1
ØB ØB
1
SW (A/F) SW
1
(A/F) Z (dia.)
M04 90 - 50 - 7 - 3
M06 105 - 60 - 10 - 3
M08 120 - 70 - 13 - 4
M10 135 - 90 - 17 - 4
M16/MKS16 150 35 90 24 22 14 4
M25/MKS25 150 37 90 30 27 19 3
MKS32 - 45 - 38 - 19 5
MKS40 - 47 - 43 - 22 5
info.dah@ bucherhydraulics.com www.bucherhydraulics.com
© 2015 by Bucher Hydraulics Dachau GmbH, D-85221 Dachau
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.