Pressure valve
Reducing function
Q
max
= 120 l/min, p
max
= 350 bar
pilot operated, spool type, mechanically adjustable
Type series: DRPA-5D-10-…
-
Screw-in cartridge valve
-
For cavity DD
-
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
-
Installation in threaded port body type DDY-12
-
2-way with external oil drain
-
Very stable operation
-
Tightening torque not affecting the function
-
Also available as stack valve
-
Seated pilot stage
Description
These two-stage pressure valves, series
DRPA-5D-10-…, are size 10, screw-in cartridge valves
with a seated pilot stage and an M24×1.5 mounting
thread. They are designed on the proven sliding-spool
principle. The spring chamber is drained with an addi‐
tional connection. The pressure applied to the secon‐
dary connection has no influence on the setting of
the valve. To obtain a reliable pressure setting over
the entire pressure range, the overall pressure range
is divided into different pressure levels. These valves
are mainly used in certain mobile and industrial appli‐
cations to reduce the system pressure. The pressure
is set by means of an adjusting spindle. All external
parts of the screw-in valves are zinc-nickel plated and
are thus suitable for use in the harshest operating
environments. For installation and further informa‐
tion, please refer to the section related data sheets.
Symbol
A
B Z
Type series: DRPA-5D-10-… 1 / 5 Reference: 400-P-280201-EN-01/11.2025
Technical data
General characteristics Description, value, unit
Function group Pressure valve
Function Reducing function
Design Screw-in cartridge valve
Controls mechanically adjustable
Characteristic pilot operated, spool type
Construction size NG 10
Thread size M24×1,5
Mounting attitude unrestricted
Weight 0.23 kg
Cavity acc. factory standard For cavity DD
Tightening torque steel 65 Nm
Tightening torque aluminium 50 Nm
Tightening torque tolerance ± 10 %
Minimum ambient temperature - 30 °C
Maximum ambient temperature + 80 °C
Surface protection
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
Sealing material see ordering code
Seal kit order number NBR: DS-216-N / FKM: DS-216-V
Hydraulic characteristics Description, value, unit
Maximum operating pressure 350 bar
Maximum flow rate 120 l/min
Flow direction see symbol
Hydraulic fluid
HL and HLP mineral oil according to DIN 51 524;
other fluids on request!
Minimum fluid temperature - 30 °C
Maximum fluid temperature + 80 °C
Viscosity range 10 … 650 mm²/s (cSt)
Recommended viscosity range 15 … 250 mm²/s (cSt)
Minimum fluid cleanliness
(cleanlineless class according to ISO 4406:1999)
class 20/18/15
Pilot-oil consumption A to Z: ca. 0.3 l/min
Minimum set pressure 10 bar
Maximum set pressure 350 bar
Pressure adjustment range
pressure range L: 1 turn. = ca. 13 bar
pressure range M: 1 turn = ca. 38 bar
pressure range N: 1 turn = ca. 65 bar
Type series: DRPA-5D-10-… 2 / 5 Reference: 400-P-280201-EN-01/11.2025
Performance graphs
measured with oil viscosity 33.0 mm²/s (cSt)
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
120100806040200
400-PG-0607
40 (580)
10 (145)
0
20 (290)
80 (1160)
30 (435)
p [bar (psi)]∆
(32)(26)(21)(16)(11)(5.25)
1)
50 (725)
60 (870)
70 (1000)
pressure range L: 10…65 bar (145…940 psi)
1) = Application limit
Q [l/min (gpm)]
120100806040200
400-PG-0606
200 (2900)
50 (725)
0
100 (1450)
150 (2150)
p [bar (psi)]∆
(32)(26)(21)(16)(11)(5.25)
1)
250 (3600)
pressure range M: 10…210 bar (145…3000 psi)
1) = Application limit
Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
120100806040200
400-PG-0605
200 (2900)
50 (725)
0
100 (1450)
400 (5800)
150 (2150)
p [bar (psi)]∆
(32)(26)(21)(16)(11)(5.25)
1)
250 (3600)
300 (4350)
350 (5000)
pressure range N: 10…350 bar (145…5000 psi)
1) = Application limit
Type series: DRPA-5D-10-… 3 / 5 Reference: 400-P-280201-EN-01/11.2025
Dimensions and sectional view
49…56.5
(1.77…2.22)
17.5…25
(0.69…0.98)
24…39
(0.94…1.54)
58.88…66.38
(2.32…2.61)
96.5…104
(3.80…4.10)
⌀29.75
(
⌀1.17)
35…42.5
(1.38…1.67)
29
(1.14)
⌀40
(
⌀1.57)
37.45
(1.47)
0.79 = 0.79 mm millimeter
(.031) = 0.031" inch
Beispiel für die Masseinheit:
Exampel for the dimensional units:
Version "S": Einstellschraube mit Innensechskant (Standard)
Version "S": adjustment screw with internal hexagon (standard)
Version "H": Einstellschraube mit Handrad
Version "H": adjustment screw with handknob
Einstellschraube mit Sicherungskappe
adjustment screw with tamper-proof cap
B
A
Z
Ø22.10/16.50×2.50
Ø21.95×1.78
Ø21.95×1.78
17
5
27
M = 1)
A
M24×1.5
s1
s2
s3
Installation information
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Gener‐
ally, the only work that should ever be under‐
taken is to check, and possibly replace, the
seals. When changing seals, oil or grease the
new seals thoroughly before fitting them.
NOTE!
Set the required pressure with the adjusting
screw
s1
. After you have set the valve, lock the
adjusting screw
s1
with the lock nut.
NOTE!
1) When fitting the screw-in cartridge valve,
use the specified tightening torque. The value
can be found in the chapter "Technical data".
NOTE!
Valve settings can be sealed by fitting the
tamper-proof cap. To fit the cap, the snap ring
s2
has to be removed. Subsequent adjustment
is only possible by destroying the tamper-
proof cap.
NOTE!
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
Type series: DRPA-5D-10-… 4 / 5 Reference: 400-P-280201-EN-01/11.2025
Ordering code
IMPORTANT!
When required, the tamper-proof cap (the adjustment seal) must be ordered separately in plain language.
Ex.
P =
cartridge design
R =
pilot operated
5 =
pressure-reducing with external spring space relief
10 =
nominal size 10
D =
cavity type DD
L =
pressure range 10…65 bar / 145…940 psi (light spring)
M =
pressure range 10…210 bar / 145…3000 psi (medium spring)
N =
pressure range 10…350 bar / 145…5000 psi (normal spring)
N =
NBR (nitril-butadien-rubber / BUNA) seals (standard)
V =
FKM (fluorocarbon rubber / VITON) seals
(special seals on request)
A ...
Q = standard model according to valid data sheet
Z ... R
= special model (on request)
1 ... 9
= technical design no. (omit by ordering)
D =
pressure-control valve
S =
with screwable manual override
H =
manual override with hand knob
10
- - -
-
R P A 5
D S N N
3
DD
Related data sheets
Reference Description
400-P-040011 Form tools
400-P-060121 Cavity DD
400-P-740112 Threaded port body DDY-12
[email protected] www.bucherhydraulics.com
© 2025 by Bucher Hydraulics AG Frutigen, 3714 Frutigen, Switzerland
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Type series: DRPA-5D-10-… 5 / 5 Reference: 400-P-280201-EN-01/11.2025