Pressure valve
Reducing function
Q
max
= 70 l/min, p
max
= 350 bar
direct acting, spool type, mechanically adjustable
Type series: DDRA-7L-10-…
-
Screw-in cartridge valve
-
For cavity DL
-
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
-
Installation in threaded port body type GCLA
-
Excellent stability over the whole pressure and flow
range
-
Full-flow secondary pressure relief
-
Sensitive adjustment
-
Available with hand-knob
Description
Die Druckventile der Typenreihe DDRA-7L-… sind
direktgesteuerte Einschraubventile mit Gewinde
M27×2 der NG 10. These two-stage pressure valves,
series DDRA-7L-…, are size 10, screw-in cartridge
valves with a seated pilot stage and an M27×2
mounting thread. They are designed on the proven
sliding-spool principle. The required secondary pres‐
sure (port 1) is controlled to the value set independ‐
ently of the inlet pressure (port 2). If the specified
pressure in connection 1 is exceeded, connection 1
opens to 3 to restore the balance. To obtain a reli‐
able pressure setting over the entire pressure range,
the overall pressure range is divided into different
pressure levels. These valves are mainly used in
certain mobile and industrial applications to reduce
the system pressure. The pressure is set by means
of an adjusting spindle. All external parts of the screw-
in valves are zinc-nickel plated and are thus suitable
for use in the harshest operating environments. For
installation and further information, please refer to
the section related data sheets.
Symbol
2
1
3
Type series: DDRA-7L-10-… 1 / 7 Reference: 400-P-260701-EN-01/09.2025
Technical data
General characteristics Description, value, unit
Function group Pressure valve
Function Reducing function
Design Screw-in cartridge valve
Controls mechanically adjustable
Characteristic direct acting, spool type
Construction size NG 10
Thread size M27×2
Mounting attitude unrestricted
Weight 0.60 kg
Cavity acc. ISO fits into ISO 7789: 27-04-0-07
Cavity acc. factory standard For cavity DL
Tightening torque steel 80 Nm
Tightening torque aluminium 80 Nm
Tightening torque tolerance ± 10 %
Minimum ambient temperature - 30 °C
Maximum ambient temperature + 80 °C
Surface protection
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
Sealing material see ordering code
Seal kit order number NBR: DS-324-N / FKM: DS-324-V
Hydraulic characteristics Description, value, unit
Maximum operating pressure 350 bar
Maximum flow rate 70 l/min
Flow direction see symbol
Hydraulic fluid
HL and HLP mineral oil according to DIN 51 524;
other fluids on request!
Minimum fluid temperature - 30 °C
Maximum fluid temperature + 80 °C
Viscosity range 10 … 650 mm²/s (cSt)
Recommended viscosity range 15 … 250 mm²/s (cSt)
Minimum fluid cleanliness
(cleanlineless class according to ISO 4406:1999)
class 20/18/15
Opening pressure 30 / 60 / 100 / 160 / 250 bar
Pressure adjustment range
pressure range 15…30 bar: 1 turn = ca. 5 bar
pressure range 20…60 bar: 1 turn = ca. 8 bar
pressure range 30…100 bar: 1 turn = ca. 14 bar
pressure range 40…160 bar: 1 turn = ca. 24 bar
pressure range 50…250 bar: 1 turn = ca. 34 bar
Type series: DDRA-7L-10-… 2 / 7 Reference: 400-P-260701-EN-01/09.2025
Performance graphs
measured with oil viscosity 33.0 mm²/s (cSt)
p = f (Q) Pressure-flow rate
Pressure range 15…30 bar
400-PG-0193
0
10 (145)
20 (290)
30 (435)
40 (580)
50 (725)
0
p [bar (psi)]
Q [l/min (gpm)]
50 60 7040
30
201020 1030
40
506070 0
1 → 3 2 → 1
p [bar (psi)]
10 (145)
20 (290)
30 (435)
40 (580)
50 (725)
(13) (16) (18)(11)
(8)
(5.25)(2.75)(5.25) (2.75)(8)
(11)
(13)(16)(18)
1)
p
N
= 30 bar (435 psi)
Einsatzgrenze / Application limit1)
p = f (Q) Pressure-flow rate
Pressure range 20…60 bar
400-PG-0194
0
20 (290)
40 (580)
60 (870)
80 (1160)
100 (1450)
0
p [bar (psi)]
p [bar (psi)]
Q [l/min (gpm)]
50 60 7040
30
201020 1030
40
506070 0
1 → 3 2 → 1
(13) (16) (18)(11)
(8)
(5.25)(2.75)(5.25) (2.75)(8)
(11)
(13)(16)(18)
20 (290)
40 (580)
60 (870)
80 (1160)
100 (1450)
1)
p
N
= 60 bar (870 psi)
Einsatzgrenze / Application limit
1)
Type series: DDRA-7L-10-… 3 / 7 Reference: 400-P-260701-EN-01/09.2025
p = f (Q) Pressure-flow rate
Pressure range 30…100 bar
400-PG-0195
0
30 (435)
60 (870)
90 (1300)
120 (1750)
150 (2150)
0
p [bar (psi)]
p [bar (psi)]
Q [l/min (gpm)]
50 60 7040
30
201020 1030
40
506070 0
1 → 3 2 → 1
(13) (16) (18)(11)
(8)
(5.25)(2.75)(5.25) (2.75)(8)
(11)
(13)(16)(18)
30 (435)
60 (870)
90 (1300)
120 (1750)
150 (2150)
1)
p
N
= 100 bar (1450 psi)
Einsatzgrenze / Application limit
1)
p = f (Q) Pressure-flow rate
Pressure range 40…160 bar
400-PG-0196
0
50 (725)
100 (1450)
150 (2150)
200 (2900)
250 (3600)
0
p! [bar (psi)]
p! [bar (psi)]
Q [l/min (gpm)]
50 60 7040
30
201020 1030
40
506070 0
1 → 3 2 → 1
(13) (16) (18)(11)
(8)
(5.25)(2.75)(5.25) (2.75)(8)
(11)
(13)(16)(18)
1)
50 (725)
100 (1450)
150 (2150)
200 (2900)
250 (3600)
p
N
= 160 bar (2300 psi)
Einsatzgrenze / Application limit1)
p = f (Q) Pressure-flow rate
Pressure range 50…250 bar
400-PG-0197
0
50 (725)
100 (1450)
150 (2150)
200 (2900)
250 (3600)
315 (4500)
p! [bar (psi)]
p! [bar (psi)]
Q [l/min (gpm)]
50 60 7040
30
201020 1030
40
506070 0
1 → 3 2 → 1
(13) (16) (18)(11)
(8)
(5.25)(2.75)(5.25) (2.75)(8)
(11)
(13)(16)(18)
50 (725)
100 (1450)
150 (2150)
200 (2900)
250 (3600)
315 (4500)
0
1)
p
N
= 250 bar (3600 psi)
Einsatzgrenze / Application limit1)
Type series: DDRA-7L-10-… 4 / 7 Reference: 400-P-260701-EN-01/09.2025
QL = f (l;Δp) Leakage flow rate QL = f (l;Δp) Leakage flow rate
400-PG-0198
0
20 (1.2)
40 (2.4)
60 (3.7)
80 (4.9)
100 (6)
120 (7.3)
50 60403020100
p [bar (psi)]
Q [cm³/min (in
3
/rev)]
DDRA-7L-10-03…
DDRA-7L-10-06…
(725) (870)(580)(435)(290)(145)
400-PG-0199
0
50 (3.1)
100 (6)
150 (9.1)
200 (12)
250 (15)
250200150100500
p! [bar (psi)]
DDRA-7L-10-10…
DDRA-7L-10-16…
DDRA-7L-10-25…
Q" [cm³/min (in
3
/rev)]
(3600)(2900)(2150)(1450)(725)
Dimensions and sectional view
Type series: DDRA-7L-10-… 5 / 7 Reference: 400-P-260701-EN-01/09.2025
Installation information
NOTE!
1) When fitting the screw-in cartridge valve,
use the specified tightening torque. The value
can be found in the chapter "Technical data".
NOTE!
Set the required pressure with the adjusting
screw
s1
. After you have set the valve, lock the
adjusting screw
s1
with the lock nut.
NOTE!
To ensure proper function, the valve should
be air-bled before commissioning. Refer to
chapter "Air-bleeding before commissioning"
NOTE!
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Gener‐
ally, the only work that should ever be under‐
taken is to check, and possibly replace, the
seals. When changing seals, oil or grease the
new seals thoroughly before fitting them.
Air-bleeding before commissioning
3
2
1
30
27
s2
1. Loosen the plug screw
s2
, unscrew approx. 2
turns.
2. Apply pressure to port 2 until oil escapes free of
air bubbles from the plug srcew.
s2
The Valve is
deaerated when the pressure medium is free of
air bubbles.
3. Tighten the plug screw
s2
with a tightening
torque of 30 Nm ±10%. (22 ft-lbs ±10%)
Type series: DDRA-7L-10-… 6 / 7 Reference: 400-P-260701-EN-01/09.2025
Ordering code
Ex.
10 =
nominal size 10
(blank)
= NBR (nitril-butadien-rubber / BUNA) seals (standard)
V =
FKM (fluorocarbon rubber / VITON) seals
(special seals on request)
A ...
Q = standard model according to valid data sheet
Z ... R
= special model (on request)
1 ... 9
= technical design no. (omit by ordering)
L =
cavity type DL
D =
pressure-control valve
06 =
pressure range 20…60 bar / 290…870 psi
03 =
pressure range 15…30 bar / 215…435 psi
10 =
pressure range 30…100 bar / 435…1450 psi
16 =
pressure range 40…160 bar / 580…2300 psi
25 =
pressure range 50…250 bar / 725…3600 psi
S =
adjustment screw with internal hexagon (standard)
H =
adjustment screw with hand knob
DR =
direct acting pressure reducing cartridge
7 =
pressure-reducing with full-flow pressure relief
25
DR
10
-
- - - -
S
A
7
L
1
D
_
D
Related data sheets
Reference Description
400-P-040011 Form tools
400-P-060201 Cavity DL
400-P-740121 Threaded port body GCLA
400-P-740122 Threaded port body GCLAA
[email protected] www.bucherhydraulics.com
© 2025 by Bucher Hydraulics AG Frutigen, 3714 Frutigen, Switzerland
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Type series: DDRA-7L-10-… 7 / 7 Reference: 400-P-260701-EN-01/09.2025