Pressure valve
Sequence function
Q
max
= 140 l/min, p
max
= 450 bar
direct acting, poppet type, mechanically adjustable
Type series: DDPDB-3D-10-…
-
Screw-in cartridge valve
-
For cavity DD
-
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
-
Installation in threaded port body type DDY-12
-
All ports are closed leak-free by means of a poppet
design
-
The external oil drain allows pressure setting without
interference by the secondary pressure
-
Suitable for use as anti-shock valve (with cross-line
relief function)
-
Also available as stack valve
Description
The pressure relief valves, series DDPD-3D-..., are size
10, direct acting, screw-in cartridge valves with an
M24×1.5 mounting thread. The poppet seat design
ensures that the valves are leak-tight. With this valve
type a so-called cross-line relief function can be real‐
ized (i.e. the pressure relief function takes place in
both volume flow directions). The use of this type
series eliminates the need for a second pressure relief
cartridge. The spring chamber is externally drained
via port Y and has to be led to the tank at zero
pressure. To obtain a reliable pressure setting over
the entire pressure range, the overall pressure range
is divided into different pressure levels. Each pres‐
sure range corresponds to a particular spring that
allows a certain maximum operating pressure to be
set. The pressure is set by means of an adjusting
spindle. All external parts of the screw-in valves are
zinc-nickel plated and are thus suitable for use in
the harshest operating environments. These valves
are mainly used in certain mobile and industrial appli‐
cations to limit the system pressure. Thanks to the
external oil drain, the actuator port can be pressur‐
ized without affecting the setting. For self-assembly,
please refer to the section related data sheets.
Symbol
B
A Y
Type series: DDPDB-3D-10-… 1 / 6 Reference: 400-P-271101-EN-01/02.2026
Technical data
General characteristics Description, value, unit
Function group Pressure valve
Function Sequence function
Design Screw-in cartridge valve
Controls mechanically adjustable
Characteristic direct acting, poppet type
Construction size NG 10
Thread size M24×1,5
Mounting attitude unrestricted
Weight 0.35 kg
Cavity acc. factory standard For cavity DD
Tightening torque steel 100 Nm
Tightening torque aluminium 50 Nm
Tightening torque tolerance ± 10 %
Minimum ambient temperature - 30 °C
Maximum ambient temperature + 80 °C
Surface protection
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
Sealing material see ordering code
Seal kit order number NBR: DS-255-N / FKM: DS-255-V
Hydraulic characteristics Description, value, unit
Maximum operating pressure 450 bar
Restriction of the operating pressure connection Y must be pressureless relieved to the tank!
Maximum flow rate 140 l/min
Flow direction see symbol
Hydraulic fluid
HL and HLP mineral oil according to DIN 51 524;
other fluids on request!
Minimum fluid temperature - 30 °C
Maximum fluid temperature + 80 °C
Viscosity range 10 … 650 mm²/s (cSt)
Recommended viscosity range 15 … 250 mm²/s (cSt)
Minimum fluid cleanliness
(cleanlineless class according to ISO 4406:1999)
class 20/18/15
Minimum set pressure 10 bar
Maximum set pressure 450 bar
Pressure adjustment range
pressure range L: 10 …100 bar
pressure range M: 80 … 240 bar
pressure range N: 180 … 350 bar
pressure range O: 300 … 400 bar
pressure range P: 350 … 450 bar
Type series: DDPDB-3D-10-… 2 / 6 Reference: 400-P-271101-EN-01/02.2026
Performance graphs
measured with oil viscosity 33.0 mm²/s (cSt)
p = f (Q) Pressure-flow rate p = f (Q) Pressure-flow rate
1)
2)
400-PG-0615
50 (725)
100 (1450)
150 (2150)
0
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDPD_-3D-10-SL
1) = Application limit pA
2) = Application limit pB
pA or pB [bar (psi)]
1)
2)
400-PG-0614
100 (1450)
200 (2900)
300 (4350)
0
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDPD_-3D-10-SM
1) = Application limit pA
2) = Application limit pB
pA or pB [bar (psi)]
p = f (Q) Pressure-flow rate p = f (Q) Pressure-flow rate
1)
2)
400-PG-0613
100 (1450)
200 (2900)
300 (4350)
400 (5800)
0
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDPD_-3D-10-SN
1) = Application limit pA
2) = Application limit pB
pA or pB [bar (psi)]
400-PG-0612
100 (1450)
200 (2900)
300 (4350)
400 (5800)
500 (7250)
0
1)
2)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDPD_-3D-10-SO
1) = Application limit pA
2) = Application limit pB
pA or pB [bar (psi)]
p = f (Q) Pressure-flow rate
400-PG-0611
100 (1450)
200 (2900)
300 (4350)
400 (5800)
500 (7250)
0
1)
2)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDPD_-3D-10-SP
1) = Application limit pA
2) = Application limit pB
pA or pB [bar (psi)]
Type series: DDPDB-3D-10-… 3 / 6 Reference: 400-P-271101-EN-01/02.2026
Dimensions and sectional view
5
17
27
M24×1.5
25.7...32.7
84.5...9146.5
Ø 30
MA = 1)
A
B
Y
s1
Version ''S'': Einstellschraube (Standard)
Version ''S'': adjustment screw (standard)
43...50
(1.69…1.96)
Version ''H'': Einstellschraube mit Handrad
Version ''H''
Ø 40
(Ø 1.57)
36.5
(1.43)
Einstellschraube mit Sicherungskappe
adjustment screw with tamper-proof cap
(1.83) (3.33…3.60)
(1.01…1.28)
(Ø 1.18)
(5.16…5.41)
s2
s3
Ø21.95×1.78
Ø21.00×2.00
Ø22.10/16.10×2.50
Beispiel für die Masseinheit:
Example for the dimensional units:
(.031) =
0.031''
inch
0.79 = 0.79 mm millimeter
Installation information
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Gener‐
ally, the only work that should ever be under‐
taken is to check, and possibly replace, the
seals. When changing seals, oil or grease the
new seals thoroughly before fitting them.
NOTE!
Set the required pressure with the adjusting
screw
s1
. After you have set the valve, lock the
adjusting screw
s1
with the lock nut.
Type series: DDPDB-3D-10-… 4 / 6 Reference: 400-P-271101-EN-01/02.2026
NOTE!
1) When fitting the screw-in cartridge valve,
use the specified tightening torque. The value
can be found in the chapter "Technical data".
NOTE!
Valve settings can be sealed by fitting the
tamper-proof cap. To fit the cap, the snap ring
s2
has to be removed. Subsequent adjustment
is only possible by destroying the tamper-
proof cap.
NOTE!
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
Application example
In the application example, valve type DDPD_-3D-10...
is used as shock protection for a hydraulic motor.
B
A
Y
Type series: DDPDB-3D-10-… 5 / 6 Reference: 400-P-271101-EN-01/02.2026
Ordering code
= pressure valve
= relief-function, direct acting
= cartridge design
= cross-line relief function (dual)
=
-Ex. D3B --P DD
-D
10 S
NOTE!
When required the tamper-proof cap (seal) for the adjustment screw must be ordered separately
in plain language.
2L
D
D
P
Z ... R
standard model according to valid data sheet
= special model (on request)
= pressure function 3 (Y-outlet external)
= cavity type DD
= nominal size10
= pressure range 350…450 bar / 5000…6500 psi
= pressure range 300…400 bar / 4350…5800 psi
= pressure range 180…350 bar / 2600…5000 psi
= pressure range 80…240 bar / 1160…3500 psi
= pressure range 10…100 bar / 145…1450 psi
= adjustment screw with internal hexagon (standard)
= adjustment screw with hand knob
technical design no. (omit by ordering)
(special seals on request)
NBR (nitril-butadien-rubber / BUNA) seals (standard)
FKM (fluorocarbon rubber / VITON) seals
=
=
=
A ... Q
3
D
10
P
O
N
M
L
S
H
1...9
N
V
N
D
Related data sheets
Reference Description
400-P-040011 Form tools
400-P-060121 Cavity DD
400-P-740112 Threaded port body DDY-12
[email protected] www.bucherhydraulics.com
© 2026 by Bucher Hydraulics AG Frutigen, 3714 Frutigen, Switzerland
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Type series: DDPDB-3D-10-… 6 / 6 Reference: 400-P-271101-EN-01/02.2026