Pressure valve
Relief function
Q
max
= 30 l/min, p
max
= 420 bar
direct acting, poppet type, mechanically adjustable
Type series: DDPC-1L-4-…
-
Screw-in cartridge valve
-
For cavity AL
-
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
-
Installation in threaded port body type GALA
-
High flow rates
-
Compact construction
-
High-pressure damping ensures very stable operation
-
Suitable for use as anti-shock valve
Description
The pressure relief valves, series DDP-1L-…, are
size 4, direct acting, screw-in cartridge valves with
a 3/4-16 UNF mounting thread. The poppet seat
design ensures that the valves are leak-tight. The
straightforward design delivers an outstanding price/
performance ratio and good pressure/flow ratings. To
obtain a reliable pressure setting over the entire pres‐
sure range, the overall pressure range is divided into
different pressure levels. Each pressure range corre‐
sponds to a particular spring that allows a certain
maximum operating pressure to be set. The pressure
is set by means of an adjusting spindle. All external
parts of the screw-in valves are zinc-nickel plated
and are thus suitable for use in the harshest oper‐
ating environments. These valves are mainly used
in certain mobile and industrial applications to limit
the system pressure. Please note that any tank or
return-line pressures are additive to the setting. For
self-assembly, please refer to the section related data
sheets.
Symbol
2
1
Type series: DDPC-1L-4-… 1 / 6 Reference: 400-P-260111-EN-01/02.2026
Technical data
General characteristics Description, value, unit
Function group Pressure valve
Function Relief function
Design Screw-in cartridge valve
Controls mechanically adjustable
Characteristic direct acting, poppet type
Construction size NG 4
Thread size 3/4-16 UNF-2A
Mounting attitude unrestricted
Weight 0.19 kg
Cavity acc. factory standard For cavity AL
Tightening torque steel 50 Nm
Tightening torque aluminium 50 Nm
Tightening torque tolerance ± 10 %
Minimum ambient temperature - 30 °C
Maximum ambient temperature + 80 °C
Surface protection
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
Sealing material see ordering code
Seal kit order number NBR: DS-350-N / FKM: DS-350-V
Hydraulic characteristics Description, value, unit
Maximum operating pressure 420 bar
Restriction of the operating pressure port 1: max. 250 bar ¹)
Maximum flow rate 30 l/min
Flow direction see symbol
Hydraulic fluid
HL and HLP mineral oil according to DIN 51 524;
other fluids on request!
Minimum fluid temperature - 30 °C
Maximum fluid temperature + 80 °C
Viscosity range 10 … 650 mm²/s (cSt)
Recommended viscosity range 15 … 250 mm²/s (cSt)
Minimum fluid cleanliness
(cleanlineless class according to ISO 4406:1999)
class 20/18/15
Opening pressure 20 / 40 / 100 / 160 / 250 / 350 / 420 bar
Minimum set pressure 5 bar
Maximum set pressure 420 bar
Pressure adjustment range
pressure range 02: 1 turn = approx. 4 bar
pressure range 04: 1 turn = approx. 8 bar
pressure range 10: 1 turn = approx. 21 bar
pressure range 16: 1 turn = approx. 32 bar
pressure range 25: 1 turn = approx. 51 bar
pressure range 35: 1 turn = approx. 70 bar
pressure range 42: 1 turn = approx. 80 bar
Type series: DDPC-1L-4-… 2 / 6 Reference: 400-P-260111-EN-01/02.2026
NOTE!
¹) Please note that any tank or return-line pres‐
sures acting at port 1 are additive to the pres‐
sure setting at port 2.
Performance graphs
measured with oil viscosity 33.0 mm²/s (cSt)
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
400-PG-0539
0
p [bar (psi)]∆
1)
400 (5800)
100 (1450)
200 (2900)
500 (7250)
300 (4350)
Q [l/min (gpm)]
30
2520151050
(8)
(6.5)(5.25)(4)(2.75)
(1.25)
p
N
= 420 bar (6000 psi)
1) = Application limit / minimum bypass pressure
Q [l/min (gpm)]
400-PG-0540
p [bar (psi)]∆
0
1)
p
N
= 350 bar (5000 psi)
1) = Application limit / minimum bypass pressure
100 (1450)
200 (2900)
400 (5800)
300 (4350)
30
2520151050
(8)(6.5)(5.25)(4)(2.75)(1.25)
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
400-PG-0541
p [bar (psi)]∆
0
1)
302520151050
(8)(6.5)(5.25)(4)(2.75)(1.25)
50 (725)
100 (1450)
150 (2150)
200 (2900)
250 (3600)
300 (4350)
p
N
= 250 bar (3600 psi)
1) = Application limit / minimum bypass pressure
Q [l/min (gpm)]
400-PG-0542
0
p [bar (psi)]∆
1)
30
2520151050
(8)
(6.5)(5.25)(4)(2.75)(1.25)
160 (2300)
40 (580)
80 (1160)
200 (2900)
120 (1750)
p
N
= 160 bar (2300 psi)
1) = Application limit / minimum bypass pressure
Type series: DDPC-1L-4-… 3 / 6 Reference: 400-P-260111-EN-01/02.2026
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
400-PG-0543
100 (1450)
25 (360)
0
50 (725)
125 (1800)
75 (1085)
p [bar (psi)]∆
1)
30
2520151050
(8)
(6.5)(5.25)(4)(2.75)(1.25)
p
N
= 100 bar (1450 psi)
1) = Application limit / minimum bypass pressure
Q [l/min (gpm)]
400-PG-0544
0
p [bar (psi)]∆
1)
p
N
= 40 bar (580 psi)
1) = Application limit / minimum bypass pressure
30
2520151050
(8)
(6.5)(5.25)(4)(2.75)(1.25)
40 (580)
10 (145)
20 (290)
50 (725)
30 (435)
Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
400-PG-0545
10 (145)
20 (290)
40 (580)
30 (435)
p [bar (psi)]∆
0
1)
302520151050
(8)(6.5)(5.25)(4)(2.75)(1.25)
p
N
= 20 bar (290 psi)
1) = Application limit / minimum bypass pressure
Type series: DDPC-1L-4-… 4 / 6 Reference: 400-P-260111-EN-01/02.2026
Dimensions and sectional view
2
1
Ø 24
(Ø .945)
4
s1
s2
3/4-16 UNF-2A
13
22
MA = 1)
(.590 … .826)
15...21
67…73
(2.64…2.87)
33.1
(1.30)
100…106
(3.95…4.17)
Version ''S'': Einstellschraube (Standard)
Version ''S'': adjustment screw (standard)
27...33
(1.06…1.30)
Version ''H'': Einstellschraube mit Handrad
Version ''H''
: adjustment screw with handknob
Ø 32
(Ø 1.26)
26
(1.02)
Einstellschraube mit Sicherungskappe
adjustment screw with tamper-proof cap
Beispiel für die Masseinheit:
Example for the dimensional units:
(.031) =
0.031''
inch
0.79 = 0.79 mm millimeter
s3
Ø17.17×1.78
Ø12.42×1.78
Ø10.70×1.45×1.00
Ø10.70×1.45×1.00
Installation information
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Gener‐
ally, the only work that should ever be under‐
taken is to check, and possibly replace, the
seals. When changing seals, oil or grease the
new seals thoroughly before fitting them.
NOTE!
Set the required pressure with the adjusting
screw
. After you have set the valve, lock the
adjusting screw
with the lock nut.
NOTE!
1) When fitting the screw-in cartridge valve,
use the specified tightening torque. The value
can be found in the chapter "Technical data".
Type series: DDPC-1L-4-… 5 / 6 Reference: 400-P-260111-EN-01/02.2026
NOTE!
Valve settings can be sealed by fitting the
tamper-proof cap. To fit the cap, the snap ring
has to be removed. Subsequent adjustment
is only possible by destroying the tamper-
proof cap.
NOTE!
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
Ordering code
= pressure valve
= relief-function, direct acting
= cartridge design
=
standard model according to valid data sheet
= special model (on request)
= pressure relief with internal spring space relief
= cavity type AL
= nominal size 4
= pressure range 100…420 bar / 1450…6000 psi
= pressure range 100…350 bar / 1450…5000 psi
= pressure range 50…250 bar / 725…3600 psi
= pressure range 40…160 bar / 580…2300 psi
= pressure range 25…100 bar / 360…1450 psi
= pressure range 10 … 40 bar / 145…580 psi
= pressure range 5 … 20 bar / 70…290 psi
= adjustment screw with internal hexagon (standard)
= adjustment screw with hand knob
technical design no. (omit by ordering)
-Ex. 02
-
L1C --PD
-D
4 S
(special seals on request)
NBR (nitril-butadien-rubber / BUNA) seals (standard)
FKM (fluorocarbon rubber / VITON) seals
NOTE!
When required the tamper-proof cap (seal) for the adjustment screw must be ordered separately
in plain language.
=
=
=
2
N
D
D
P
A ... Q
Z ... R
1
L
4
42
35
25
16
10
04
02
S
H
1…9
N
V
Related data sheets
Reference Description
400-P-040011 Form tools
400-P-040171 Cavity AL
400-P-720101 Threaded port body GALA
[email protected] www.bucherhydraulics.com
© 2026 by Bucher Hydraulics AG Frutigen, 3714 Frutigen, Switzerland
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Type series: DDPC-1L-4-… 6 / 6 Reference: 400-P-260111-EN-01/02.2026