Pressure valve
Relief function
Q
max
= 140 l/min, p
max
= 450 bar
direct acting, poppet type, mechanically adjustable
Type series: DDPB-1C-10-…
-
Screw-in cartridge valve
-
For cavity DC
-
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
-
Installation in threaded port body type DC-12
-
All ports are closed leak-free by means of a poppet
design
-
Thanks to a dynamic stroke aid, a favorable character‐
istic curve is achieved
-
Very fast and stable response
-
Suitable for use as preload valve or anti-shock valve
-
Also available as stack valve
Description
The pressure relief valves, series DDP-1C-…, are size
10, direct acting, screw-in cartridge valves with an
M24×1.5 mounting thread. The poppet seat design
ensures that the valves are leak-tight. The spring
chamber is internally drained to port B. Port B should
preferably be connected to the tank. To obtain a reli‐
able pressure setting over the entire pressure range,
the overall pressure range is divided into different
pressure levels. Each pressure range corresponds to
a particular spring that allows a certain maximum
operating pressure to be set. The pressure is set by
means of an adjusting spindle. All external parts of
the screw-in valves are zinc-nickel plated and are thus
suitable for use in the harshest operating environ‐
ments. These valves are mainly used in certain mobile
and industrial applications to limit the system pres‐
sure. Please note that any tank or return-line pres‐
sures are additive to the setting. For self-assembly,
please refer to the section related data sheets.
Symbol
A
B
Type series: DDPB-1C-10-… 1 / 6 Reference: 400-P-270101-EN-01/02.2026
Technical data
General characteristics Description, value, unit
Function group Pressure valve
Function Relief function
Design Screw-in cartridge valve
Controls mechanically adjustable
Characteristic direct acting, poppet type
Construction size NG 10
Thread size M24×1,5
Mounting attitude unrestricted
Weight 0.35 kg
Cavity acc. factory standard For cavity DC
Tightening torque steel 100 Nm
Tightening torque aluminium 50 Nm
Tightening torque tolerance ± 10 %
Minimum ambient temperature - 30 °C
Maximum ambient temperature + 80 °C
Surface protection
All external parts with zinc-nickel plating according to
DIN EN ISO 19598
Sealing material see ordering code
Seal kit order number NBR: DS-207-N / FKM: DS-207-V
Hydraulic characteristics Description, value, unit
Maximum operating pressure 450 bar
Restriction of the operating pressure ¹)
Maximum flow rate 140 l/min
Flow direction see symbol
Hydraulic fluid
HL and HLP mineral oil according to DIN 51 524;
other fluids on request!
Minimum fluid temperature - 30 °C
Maximum fluid temperature + 80 °C
Viscosity range 10 … 650 mm²/s (cSt)
Recommended viscosity range 15 … 250 mm²/s (cSt)
Minimum fluid cleanliness
(cleanlineless class according to ISO 4406:1999)
class 20/18/15
Minimum set pressure 10 bar
Maximum set pressure 450 bar
Pressure adjustment range
pressure range L: 10 … 100 bar
pressure range M: 80 … 240 bar
pressure range N: 180 … 350 bar
pressure range O: 300 … 400 bar
pressure range P: 350 … 450 bar
NOTE!
¹) Please note that any tank or return-line pres‐
sures acting at port B are additive to the pres‐
sure setting at port A.
Type series: DDPB-1C-10-… 2 / 6 Reference: 400-P-270101-EN-01/02.2026
Performance graphs
measured with oil viscosity 33.0 mm²/s (cSt)
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
Q [l/min (gpm)]
100806040200
400-PG-0604
50 (725)
100 (1450)
150 (2150)
p [bar (psi)]
∆
(26)(21)(16)(11)(5.25)
0
140
(37)
120
(32)
1)
Version: DDP_-1C-10-SL
1) = Application limit
400-PG-0603
100 (1450)
200 (2900)
300 (4350)
p [bar (psi)]
∆
0
1)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDP_-1C-10-SM
1) = Application limit
Δp = f (Q) Pressure drop-flow rate characteristic Δp = f (Q) Pressure drop-flow rate characteristic
400-PG-0602
100 (1450)
200 (2900)
300 (4350)
400 (5800)
p [bar (psi)]
∆
0
1)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDP_-1C-10-SN
1) = Application limit
400-PG-0601
100 (1450)
200 (2900)
300 (4350)
400 (5800)
500 (7250)
p [bar (psi)]
∆
0
1)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDP_-1C-10-SO
1) = Application limit
Δp = f (Q) Pressure drop-flow rate characteristic
400-PG-0600
100 (1450)
200 (2900)
300 (4350)
400 (5800)
500 (7250)
p [bar (psi)]∆
0
1)
Q [l/min (gpm)]
100806040200
(26)(21)(16)(11)(5.25)
140
(37)
120
(32)
Version: DDP_-1C-10-SP
1) = Application limit
Type series: DDPB-1C-10-… 3 / 6 Reference: 400-P-270101-EN-01/02.2026
Dimensions and sectional view
5
17
M24×1,5
25.7...32.7
133.4...140.4
27
Ø 30
34.7
MA = 1)
A
B
s1
98.7...105.7
Version ''S'': Einstellschraube (Standard)
Version ''S'': adjustment screw (standard)
(1.36) (3.88…4.16)
(5.25…5.52)
(1.01…1.28)
(Ø 1.18)
43...50
(1.69…1.96)
Version ''H'': Einstellschraube mit Handrad
Version ''H''
: adjustment screw with handknob
Ø 40
(Ø 1.57)
36.5
(1.43)
Einstellschraube mit Sicherungskappe
adjustment screw with tamper-proof cap
s2
s3
Beispiel für die Masseinheit:
Example for the dimensional units:
(.031) =
0.031''
inch
0.79 = 0.79 mm millimeter
Ø23.52×1.78
Ø22.10/16.10×2.50
Installation information
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Gener‐
ally, the only work that should ever be under‐
taken is to check, and possibly replace, the
seals. When changing seals, oil or grease the
new seals thoroughly before fitting them.
NOTE!
Set the required pressure with the adjusting
screw
s1
. After you have set the valve, lock the
adjusting screw
s1
with the lock nut.
Type series: DDPB-1C-10-… 4 / 6 Reference: 400-P-270101-EN-01/02.2026
NOTE!
1) When fitting the screw-in cartridge valve,
use the specified tightening torque. The value
can be found in the chapter "Technical data".
NOTE!
Valve settings can be sealed by fitting the
tamper-proof cap. To fit the cap, the snap ring
s2
has to be removed. Subsequent adjustment
is only possible by destroying the tamper-
proof cap.
NOTE!
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
Ordering code
in plain language.
_
Related data sheets
Reference Description
400-P-040011 Form tools
400-P-060111 Cavity DC
400-P-740101 Threaded port body DC-12
Type series: DDPB-1C-10-… 5 / 6 Reference: 400-P-270101-EN-01/02.2026
[email protected] www.bucherhydraulics.com
© 2026 by Bucher Hydraulics AG Frutigen, 3714 Frutigen, Switzerland
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Type series: DDPB-1C-10-… 6 / 6 Reference: 400-P-270101-EN-01/02.2026