
1/2
VSKD-10A 04.19.02 - X - 85 - Z
Relief, pilot operated spool type
unloading
Common cavity, Size 10
Flow is blocked from 1 to 2 until pressure increases to meet the
selected valve setting, lifting the pilot-stage piston check from its
seat. This action exhausts oil above the main-stage piston (spool
type), allowing it to shift fully and unload flow from 1 through 2 with
minimal pressure drop. The valve is held fully open until flow through
the valve ceases. The spring chamber is drained to tank at 2. Any
pressure at 2 will be additive to the valve setting.
Technical data
Description
Performance
Max. operating pressure
port 1 (P)
bar (psi) 420 (6000)
Max. pressure admitted
port 2 (T)
bar (psi) 140 (2000)
Flow range l/min. (gpm)
5-80 (1.3-21)
Max. internal
leakage (*)
cm
3
/min. (cu.in./min.)
200 (12)
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Installation torque Nm (ft-lbs) 41-47 (30-35)
Weight kg (lbs) 0.2 (0.44)
Cavity
CA-10A-2N
see data sheet RE 18325-70
Seal kit (**)
code
material no.
RG10A2010530100
R901111366
Fluids
Mineral-based or synthetics
with lubricating properties at
viscosities of 10 to 500 mm
2
/s (cSt)
Filtration
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Installation No restrictions
Other general technical data See data sheet RE 18350-50
(*) Measured at 200 bar (2900 psi)
(**) Only external seals for 10 valves
RE 18318-15/09.09
Replaces: RE 00162-02/01.06