RE 18307-67/12.2022, Bosch Rexroth Oil Control S.p.A.
Description
It provides static and dynamic control of load by regulating
the ow IN and OUT of the actuator, through ports C1 and
C2. This valve module includes 2 sections, each one
composed by a check and a relief valve with balanced
piston, pilot assisted by pressure in the opposite line: the
check section allows free ow into the actuator, then holds
the load against reverse movement; with pilot pressure
applied at the line across, the pressure setting of the relief
is reduced in proportion to the stated ratio until opening
and allowing controlled reverse ow. Relief operates at the
valve setting independent of back-pressure, but the piloted
opening remains subject to additive pressure at V1 or V2.
Dual counterbalance,
relief compensated
RE 18307-67
Edition: 12.2022
Replaces: 03.2016A-VBSO-DE-CC-30 08.44.04 - X - Y - Z
Characteristic curve
Flow Q
Pressure Δp
Technical data
Max. operating pressure 410 bar (5945 psi)
Max. ow 60 l/min. (16 gpm)
Weight see “Dimensions”
Manifold material Zinc plated steel
Fluid Mineral oil (HL, HLP) according
DIN 51524
Fluid temperature range -30 °C to 100 (-22 to 212 °F)
Viscosity range 5 to 800 mm
2
/s (cSt)
Recommended degree of uid
contamination
Class 19/17/14 according to
ISO 4406
MTTFd 150 years see data sheet 18350-51
Other technical data see data sheet 18350-50
Relief setting: at least 1.3 times the highest expected load.
Note: for applications outside these parameters, please consult us.
2
Bosch Rexroth Oil Control S.p.A., RE 18307-67/12.2022
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-pib@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specied above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verication. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
A-VBSO-DE-CC-30 | Dual counterbalance
Dimensions [mm (inches)]
Dimensions
Type Material number
084404030220000 R930003349
084404030235000 R930003352
Type Material number
084404030320000 R930003355
084404030335000 R930003356
Ordering code
08.44.04 X Y Z
Dual counterbalance
SPRINGS
Adj. pressure
range
bar (psi)
Pres. increase
bar/turn
(psi/turn)
Std. setting
Q=5 (l/min)
bar (psi)
Pilot ratio
03 4.2 : 1
20
60-210
(870-3000)
75
(1088)
200
(2900)
35
100-350
(1450-5000)
165
(2393)
350
(5000)
Pressure setting up to 410 bar: code on request.
Port sizes V1 - V2 C1 - C2
02 G 3/8
G 3/8
03 G 1/2
G 1/2
Preferred types
Tamper resistant cap code
ordering code 11.04.23.003
Mat. no. R930000754