VSO3-10/M
Ports P, A, B, T - max ∅11.2 mm (0.44 in)
Number of turns the screw
2 3 4 5 6 7 8 9 10 11
Throttle valve closed Throttle fully open
1 2
13,5 (0.53)
24,6 (0.97)
39,7 (1.56)
46 (1.81)
16,7 (0.66)
27 (1.06)
37,3 (1.47)
50,8 (1.99)
54 (2.13)
3,2 (0.13)
4xM6 -6Hx15+1/18-2
T
A
A
B
P
T
B
100
(1450)
(2180)
(725)
(2900)
(3630)
0
20
40
100
150
50
200
250
60
(42.3)
(10.6) (21.1)
160
140
1
2
3
4
5
6
7
80
300
350
120
(31.7)
(4350)
(5080)
9
10
8
2
1
100
(87)
(130)
(43)
(174)
(217)
0
20
40
6
9
3
12
15
60
(42.3)
(10.6) (21.1)
160
140
80
120
(31.7)
0
Subject to change · VSO3-10/M_5076_2en_10/2017
www.argo-hytos.com
Page 1
Restrictor Valve with Reverse Flow Check, Modular
› Restrictor valve with reverse flow check with subplate mounting surface acc.
to ISO 4401, DIN 24340 (CETOP 05) standards
› Meter-in or meter-out flow control
› Leak-free closure in one or two service ports
› Linear adjustment and positive seat closing
› Desired settings may be locked down
› Adjustment option with allen head and protective cup
› In the standard version, the valve is zinc coated for 240 h protection acc. to ISO 9227
and valve body is phosphated
Technical Features
Characteristics measured at ν = 32 mm
2
/s (156 SUS)
Technical Data
ISO 4401-05-04-0-05
Dual hydraulic flow restrictor valve with by pass check valve option are used to control flow
rates in two separate lines (A,B) of a hydraulic circuit. The modular design provides six
functional versions. The valve restricts the fluid flow in one direction while providing reverse
free-flow in the opposite direction. The throttling is adjusted by means of a set screw.
The sandwich design enables simple stacking with other components of the same size.
The separate o-ring plate with fitted o-rings provides sealing of the valve connecting surface.
According to the valve arrangement, the meter-in or meter-out control is provided. Changing
the meter-in mode into the meter-out mode can be done by turning the valve by 180° around
its x-axis. The orientation of the throttle check valves in the valve body corresponds with
the symbols shown on the nameplate. The set screw can be operated by a key, handknob
or by a handknob with key lock.
Functional Description
Valve size 10 (D05)
Max. flow l/min (GPM) 160 (42)
Max. operating pressure bar (PSI) 350 (5080)
Fluid temperature range (NBR) °C (°F) -30 .... +100 (-22 ... +212)
Fluid temperature range (FPM) °C (°F) -20 .... +120 (-4 ... +248)
Weight kg (Ibs) 2.15 (4.74)
Datasheet Type
General information GI_0060 products and operating conditions
Mounting interface SMT_0019 Size 06
Spare parts SP_8010
Check valve pressure drop related to flow ratePressure drop related to flow rate
Flow Q [l/min (GPM)]
Pressure drop Dp [bar (PSI)]
Pressure drop Dp [bar (PSI)]
Flow Q [l/min (GPM)]
Size 10 (D05) Q
max
160 l/min (42 GPM) p
max
350 bar (5100 PSI)
Model ”A„
Model ”B„
Model ”C„
O-ring plate
supplied in each delivery
VSO3-10/MA VSO3-10/MB VSO3-10/MC
VSO3 - 10 / M -
A
B
C T
1,4 0.1()
70x90 (2.75x3.54)
69,5 (2.74)
18 (0.71)
11,75 (0.46)
110 (4.33)
10 (0.39)
10 (0.39)
max. 221 8.7()
TBTA
AB
P
24,3
(0.96)
48,6 (1.91)
36,35 (1.43)
50 (1.96)
(max.174,5 (6.9))
55 52 9, ( .1 )
6
13
9 (0.35)
+Q
Q
Subject to change · VSO3-10/M_5076_2en_10/2017
www.argo-hytos.com
Page 2
Dimensions in millimeters (inches)
Functional symbols
Caution!
The orientation of the symbol shown on the name plate corresponds with the function of the valve.
The separate o-ring plate allows to turn arround the body. The meter-out throttling can be changed to the meter-in throttling by simple rotating
the plate only at MC type. At the types MA and MB, the valve position in channels A and B is changed due to the one axis symmetry
of the mounting interface of modular plate. This can be solved by ordering the opposite type (see table below) or by additional changing
the valve and end plug positions each other.
Recommended types depending on valve position and throttling mode:
The valves are assembled in meter-out version.
To get meter-in version for variant MC with valves in both channels, just turn it.
Remember: the channels A and B are changed in meter-in version.
It is important when meter-in is required for variant MA or MB.
Ordering Code
Restrictor valve with reverse
flow check, modular
Valve size
Modular design
Functional symbols
Check valve in line A, meter-out
Check valve in line B, meter-out
Check valve in line A and B, meter-out
Seals
NBR
FPM (Viton)
Adjustment option
allen head (hex.5) with protective cap
No designation
V
Surface treatment
phosphated body, valve for 240 h
salt spray test (ISO 9227)
body and valve for 240 h salt spray test (ISO 9227)
body and valve for 520 h salt spray test (ISO 9227)
No designation
A
B
Type / valve in channel Meter-out throttling Meter-in throttling
MA / A VSO3-10/MA VSO3-10/MB, turn the plate
MB / B VSO3-10/MB VSO3-10/MA, turn the plate
MC / A, B VSO3-10/MC VSO3-10/MC, turn the plate