1
   
HA 5024
7/2012
Size 06 (D 03) · 320 bar (4600 PSI) · 45 L/min(11.8 GPM)
Pilot Operated Check Valves
Sandwich Plates
VJR2-06/M
Replaces
HA 5024 5/2008
q
Pilot operated check valve sandwich plate
for use in stacking assemblies
q
3 models
- double valve with check valves in lines A and B
- single valve with check valve in line A
- single valve with check valve in line B
q
Installation dimensions to ISO 4401,
CETOP - RP 121H and NFPA T3.5.1 - D 02
Functional Description
A pilot operated check valve closes tightly the hydraulic
circuit between the valve and the actuator. The valve
consists of the steel housing (1), one or two check
valves (2), (3) and the pilot piston (4). The main poppets
of the check valves are provided with pilot poppets (5)
which enable opening the check valve under pressure.
When fluid flows from A1 to A2 it opens the check valve
(2) and at the same time shifts the pilot piston (4) which
opens by means of the pilot poppet (5) the check valve
(3). When the pressure in channels A1 and B1 drops, the
springs push the poppets onto the seats and the circuit
between the check valve and the actuator is closed
under pressure.
To ensure that the check valves close tightly, a
directional valve with functional symbol Y is to be used,
which connects in its middle position the ports A1 and
B1 with tank T (see the typical circuit diagram).
The valve housing (1) is phosphate coated, the surfaces
of the other parts are zinc coated.
2
HA 5024
Ordering Code
Valve size mm (US) 06 (D 03)
Maximum flow L/min (GPM) 45 (11.8)
Maximum operating pressure bar (PSI) 320 (4600)
Cracking pressure bar (PSI) 2(29)
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range (NBR) °C (°F) -30 ... +100 (-22...+212)
Fluid temperature range (Viton) °C (°F) -20 ... +120(-4...+248)
Viscosity range mm
2
/s (SUS) 20 ... 400 (98...1840)
Maximum degree of fluid contamination Class 21/18/15 to ISO 4406
Area ration (pilot piston / seat) 8,16 : 1
Mounting position unrestricted
Weight kg (lbs) 1,6
VJR2-06/M
Valve size 06 (D 03)
Modular design
Seals
no designation
V
NBR
Viton
Technical Data
Functional Symbols
A
B
C
check valve in line A*
check valve in line B*
check valves in lines A and B*
* see the table Functional symbols
Functional Symbols
Pilot Operated Check Valve
Sandwich Plate
valve side
subplate side
A1
A2
B2
B1
P
T
VJR2-06/MA VJR2-06/MB VJR2-06/MC
Arrangement of the check valves in the valve body
Typical circuit with pilot
operated check valve
3
HA 5024
Valve Dimensions Dimensions in millimeters and inches
Required surface finish of
interface
Flow Q [L/min (GPM)]
Dimensions in millimeters:
1 Name plate
2 4 mounting holes
3 Seal ring (4 pcs.):
Standard (NBR) - 9.25 x 1.68
Viton (FPM) - 9.25 x 1.78
supplied with valve
Pressure drop Dp [bar (PSI)]
3
21
Dp-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Pressure drop Dp related to flow rate.
Flow in direction
1A1® A2 (B1 ® B2)
2A2® A1 (B2 ® B1)
1
2
4
HA 5024
The packing foil is recyclable.
Tightening torque of the screws is 6.6 ft-lbs (8.9 Nm).
Certified documentation is available per request.
Spare Parts
Seal kit
Type
Dimensions, quantity
Order number
Square ring O-ring
Standard NBR 70 9.25 x 1.68 (4 pcs.) - 22795100
Viton - 9.25 x 1.78 (4 pcs.) 22795200
Dimensions in millimeters
Caution!
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403111, Fax: +420-499-403421
www.argo-hytos.com