Pressure

Page 1 of 12

WIKA data sheet PM 02.12

Congurator

Standard

articles

For further approvals,

see page 7

Bourdon tube pressure gauge, model

213.53.100,

lower mount

Applications

■

For measuring locations with high dynamic pressure loads

and vibrations

■

For gaseous and liquid media that are not highly viscous

or crystallising and will not attack copper alloy parts

■

Hydraulics

■

Compressors, shipbuilding

Special features

■

Very good vibration and shock resistance

■

Especially robust design

■

Type approval for the shipbuilding industry

■

Scale ranges to 0 ... 1,000 bar or 0 ... 15,000 psi

Bourdon tube pressure gauge, copper alloy

Stainless steel case, case lling

Model 213.53, NS 50 [2"], 63 [2 ½"] and 100 [4"]

Data sheets showing similar products:

Stainless steel case, liquid lling, NS 40, 80 and 100; model 113.53; see data sheet PM 01.08

Description

The liquid-lled model 213.53 mechanical Bourdon tube

pressure gauge is constructed with a case from stainless

steel and wetted parts from copper alloy.

WIKA manufactures and qualies the pressure gauge in

accordance with the standards EN 837-1 and ASME B40.100.

As a safety function, this instrument has a blow-out device. In

the event of a failure, overpressure can escape there.

Due to the case lling, the pressure element and movement

are eciently damped. Therefore, these instruments are

particularly suited to measuring locations with high dynamic

loads, such as fast load cycles or vibrations.

The cases of the model 213.53 are available in nominal

sizes of 50 [2"], 63 [2 ½"] and 100 [4"] and full IP65 ingress

protection. With an accuracy of up to class 1.0, this pressure

gauge is suitable for a wide range of applications in industry.

For mounting in control panels, the pressure gauges with a

back mount process connection can be tted with a mounting

ange or with a triangular prole ring and mounting bracket.

WIKA data sheet PM 02.12

∙ 01/2025

WIKA data sheet PM 02.12 ∙ 01/2025 Page 2 of 12

Specications

Basic information

Standard

■

EN 837-1

■

ASME B40.100

For information on the “Selection, installation, handling and operation of pressure

gauges”, see technical information IN 00.05.

Further version Special design, model 213.57

Nominal size (NS)

■

Ø 50 mm [2"]

■

Ø 63 mm [2 ½"]

■

Ø 100 mm [4"]

Connection location

■

Lower mount (radial)

■

Centre back mount (only for NS 50 [2"] and NS 63 [2 ½"])

■

Lower back mount (only for NS 100 [4"])

Window

■

Plastic, crystal-clear

■

Laminated safety glass

Case

Design NS 50 [2"], 63 [2 ½"] Safety level “S2” per EN 837-1: With blow-out device

NS 100 [4"] Safety level “S1” per EN 837-1: With blow-out device

Position of blow-out device:

NS 50 [2"]: Case back, at 12 o'clock

NS 63 [2 ½"], 100 [4"]: Case circumference, at 12 o'clock

Filling plug can be vented and resealed for internal pressure compensation

Sealing towards process connection with O-ring

Material Stainless steel, natural nish

Ring Crimp ring, stainless steel

Mounting

■

Without

■

Panel mounting ange, stainless steel

■

Panel mounting ange, polished stainless steel

■

Triangular prole ring with mounting bracket, polished stainless steel

■

Surface mounting ange, stainless steel

Case lling

■

Glycerine

■

Glycerine-water mixture for scale range ≤ 0 ... 2.5 bar [≤ 0 ... 40 psi]

■

Silicone oil

Movement Copper alloy

1) Only for back mount

2) Only for NS 63 [2 ½"] and NS 100 [4"], back mount

3) Only for NS 63 [2 ½"]

4) Only for NS 63 [2 ½"] and NS 100 [4"]

Measuring element

Type of measuring element Bourdon tube, C-type or helical type

Material

NS 50 [2"] ≤ 600 bar Copper alloy

> 600 bar Stainless steel 316L

NS 63 [2 ½"], NS 100 [4"] ≤ 400 bar Copper alloy

> 400 bar Stainless steel 316L

Leak tightness Leakage rate: < 5∙10

-3

mbar l/s

WIKA data sheet PM 02.12 ∙ 01/2025 Page 3 of 12

Accuracy specications

Accuracy class

NS 50 [2"], 63 [2 ½"]

■

EN 837-1 Class 1.6

■

ASME B40.100 ±2 % │ ±1 % │ ±2 % of measuring span (grade A)

NS 100 [4"]

■

EN 837-1 Class 1.0

■

ASME B40.100 ±1 % of measuring span (grade 1A)

Temperature error On deviation from the reference conditions at the measuring system:

≤ ±0.4 % per 10 °C [≤ ±0.4 % per 18 °F] of full scale value

Reference conditions

Ambient temperature +20 °C [68 °F]

WIKA data sheet PM 02.12 ∙ 01/2025 Page 4 of 12

kg/cm

0 ... 0.6 0 ... 40

0 ... 1 0 ... 60

0 ... 1.6 0 ... 70

0 ... 2 0 ... 100

0 ... 2.5 0 ... 140

0 ... 4 0 ... 160

0 ... 6 0 ... 200

0 ... 7 0 ... 250

0 ... 10 0 ... 315

0 ... 14 0 ... 400

0 ... 16 0 ... 600

0 ... 20 0 ... 700

0 ... 25 0 ... 1,000

0 ... 30 -

MPa

0 ... 0.06 0 ... 4

0 ... 0.1 0 ... 6

0 ... 0.16 0 ... 7

0 ... 0.2 0 ... 10

0 ... 0.25 0 ... 14

0 ... 0.4 0 ... 16

0 ... 0.6 0 ... 20

0 ... 0.7 0 ... 25

0 ... 1 0 ... 31.5

0 ... 1.4 0 ... 40

0 ... 1.6 0 ... 60

0 ... 2 0 ... 70

0 ... 2.5 0 ... 100

0 ... 3 -

Scale ranges

bar

0 ... 0.6 0 ... 30

0 ... 1 0 ... 40

0 ... 1.6 0 ... 60

0 ... 2 0 ... 70

0 ... 2.5 0 ... 100

0 ... 4 0 ... 140

0 ... 6 0 ... 160

0 ... 7 0 ... 200

0 ... 10 0 ... 250

0 ... 12 0 ... 315

0 ... 14 0 ... 400

0 ... 16 0 ... 600

0 ... 20 0 ... 700

0 ... 25 0 ... 1,000

kPa

0 ... 60 0 ... 4,000

0 ... 70 0 ... 6,000

0 ... 100 0 ... 7,000

0 ... 160 0 ... 8,000

0 ... 200 0 ... 10,000

0 ... 250 0 ... 14,000

0 ... 400 0 ... 16,000

0 ... 600 0 ... 20,000

0 ... 700 0 ... 25,000

0 ... 800 0 ... 31,500

0 ... 1,000 0 ... 40,000

0 ... 1,400 0 ... 60,000

0 ... 1,600 0 ... 70,000

0 ... 2,500 0 ... 100,000

0 ... 3,000 -

psi

0 ... 10 0 ... 600

0 ... 15 0 ... 800

0 ... 30 0 ... 1,000

0 ... 60 0 ... 1,500

0 ... 100 0 ... 2,000

0 ... 150 0 ... 3,000

0 ... 160 0 ... 4,000

0 ... 200 0 ... 5,000

0 ... 300 0 ... 6,000

0 ... 400 0 ... 7,500

WIKA data sheet PM 02.12 ∙ 01/2025 Page 5 of 12

Vacuum and compound scale ranges

bar

-0.6 ... 0 -1 ... +9

-1 ... 0 -1 ... +10

-1 ... +0.6 -1 ... +15

-1 ... +1 -1 ... +24

-1 ... +1.5 -1 ... +25

-1 ... +2 -1 ... +30

-1 ... +3 -1 ... +32

-1 ... +4 -1 ... +40

-1 ... +7 -

kPa

-60 ... 0 -100 ... +500

-100 ... 0 -100 ... +700

-100 ... +60 -100 ... +900

-100 ... +100 -100 ... +1,000

-100 ... +150 -100 ... +1,500

-100 ... +200 -100 ... +2,400

-100 ... +300 -100 ... +3,000

-100 ... +400

psi

-15 inHg ... 0 -30 inHg ... +100

-30 inHg ... 0 -30 inHg ... +160

-30 inHg ... +15 -30 inHg ... +200

-30 inHg ... +30 -30 inHg ... +300

-30 inHg ... +60 -

kg/cm

-0.6 ... 0 -1 ... +5

-1 ... 0 -1 ... +7

-1 ... +0.6 -1 ... +9

-1 ... +1 -1 ... +10

-1 ... +1.5 -1 ... +15

-1 ... +2 -1 ... +24

-1 ... +3 -1 ... +30

-1 ... +4 -

MPa

-0.06 ... 0 -0.1 ... +0.5

-0.1 ... 0 -0.1 ... +0.9

-0.1 ... +0.06 -0.1 ... +1.5

-0.1 ... +0.15 -0.1 ... +2.4

-0.1 ... +0.3 -

Further details on: scale ranges

Special scale ranges Other scale ranges on request

Unit

■

bar

■

psi

■

kg/cm²

■

kPa

■

MPa

Increased overload safety

■

Without

■

2 times

The possibility of selection depends on the scale range

Dial

Scale colour Black

Material Aluminium

Special scale

■

Without

■

With temperature scale for refrigerant, e.g. for NH

: R 717

Other scales or customer-specic dials, e.g. with red mark, circular arcs or circular

sectors, on request

WIKA data sheet PM 02.12 ∙ 01/2025 Page 6 of 12

Further details on: scale ranges

Pointer

Instrument pointer Aluminium, black

Mark pointer/drag pointer

■

Without

■

Red mark pointer on dial, xed

■

Red mark pointer on window, adjustable

■

Mark pointer on bayonet ring, adjustable

■

Red drag pointer on window, adjustable

Pointer stop pin

■

Without

■

At zero point (only for NS 50 [2"] and NS 63 [2 ½"])

■

At 6 o‘clock (only for NS 100 [4"])

Process connection

Standard

■

EN 837-1

■

ISO 7

■

ANSI/B1.20.1

Size

EN 837-1

■

G ⅛ B, male thread

■

G ¼ B, male thread

■

G ½ B, male thread

■

M12 x 1.5, male thread

■

M20 x 1.5, male thread

ISO 7

■

R ¼, male thread

■

R ½, male thread

ANSI/B1.20.1

■

¼ NPT, male thread

■

½ NPT, male thread

Restrictor

■

Without

■

∅ 0.5 mm [0.02"], copper alloy

■

∅ 0.3 mm [0.012"], copper alloy

Material (wetted)

Process connection Copper alloy

Bourdon tube → See table “Measuring element”, page 2

Other process connections on request

Operating conditions

Medium temperature

Instruments with glycerine lling -20 ... +100 °C [-4 ... +212 °F]

Instruments with silicone oil lling -40 ... +100 °C [-40 ... +212 °F]

Ambient temperature

Instruments with glycerine lling -20 ... +60 °C [-4 ... +140 °F]

Instruments with silicone oil lling -40 ... +60 °C [-40 ... +140 °F]

Pressure limitation

NS 50 [2"], 63 [2 ½"] Steady 3/4 x full scale value

Fluctuating 2/3 x full scale value

Short time Full scale value

NS 100 [4"] Steady Full scale value

Fluctuating 0.9 x full scale value

Short time 1.3 x full scale value

Ingress protection per IEC/EN 60529

■

IP65

■

IP66 (only selectable for scale ranges ≥ 0 ... 20 bar [≥ 0 ... 400 psi])

WIKA data sheet PM 02.12 ∙ 01/2025 Page 7 of 12

Approvals

Logo Description Region

EU declaration of conformity European Union

Pressure equipment directive

PS > 200 bar, module A, pressure accessory

UKCA United Kingdom

Pressure equipment (safety) regulations

- CRN

Safety (e.g. electr. safety, overpressure, ...)

For scale ranges ≤ 1,000 bar

Canada

Optional approvals

Logo Description Region

PAC Kazakhstan

Metrology, measurement technology

Kazakhstan

- MChS

Permission for commissioning

Kazakhstan

- PAC Ukraine

Metrology, measurement technology

Ukraine

PAC Uzbekistan

Metrology, measurement technology

Uzbekistan

PAC China

Metrology, measurement technology

China

DNV

Ships, shipbuilding (e.g. oshore)

International

Manufacturer’s declaration

Logo Description

- Pressure Equipment Directive (PED) for maximum allowable pressure PS ≤ 200 bar

- Suitability of wetted materials for drinking water in accordance with the European 4MS initiative

Certicates (option)

Certicates

■

2.2 test report per EN 10204 (e.g. state-of-the-art manufacturing, indication accuracy)

■

3.1 inspection certicate for indication accuracy per EN 10204

■

PCA calibration certicate, traceable and accredited in accordance with ISO/IEC 17025

■

Calibration certicate by a national accreditation body, traceable and accredited in accordance with

ISO/IEC 17025 on request

Recommended calibration

interval

1 year (dependent on conditions of use)

→ For approvals and certicates, see website

WIKA data sheet PM 02.12 ∙ 01/2025 Page 8 of 12

Process connection with thread per EN 837-1

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] e D SW

50 [2"]

G ⅛ B 45 [1.77] 10 [0.39] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

G ¼ B 48 [1.89] 13 [0.51] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

M12 x 1.5 48 [1.89] 13 [0.51] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"] G ⅛ B 51 [2.01] 10 [0.39] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

G ¼ B 54 [2.13] 13 [0.51] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

M12 x 1.5 54 [2.13] 13 [0.51] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

Process connection with thread per ISO 7

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] e D SW

50 [2"] R ⅛

45 [1.77] 10 [0.39] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

R ¼

48 [1.89] 13 [0.51] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"]

R ⅛

51 [2.01] 10 [0.39] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

R ¼

54 [2.13] 13 [0.51] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

Process connection with thread per ANSI/B1.20.1

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] e D SW

50 [2"]

⅛ NPT 45 [1.77] 10 [0.39] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

¼ NPT 48 [1.89] 13 [0.51] 12 [0.47] 30 [1.18] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"] ⅛ NPT 51 [2.01] 10 [0.39] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

¼ NPT 54 [2.13] 13 [0.51] 13 [0.51] 32 [1.26] 6.5 [0.26] 68 [2.68] 14 [0.55]

ISO

⌀D

ANSI

□SW

1224557.04

NS 50 [2"] and NS 63 [2 ½"], lower mount (radial)

NS Weight

NS 50 [2"] 0.15 kg [0.33 lb]

NS 63 [2 ½"] 0.21 kg [0.46 lb]

Dimensions in mm [in]

WIKA data sheet PM 02.12 ∙ 01/2025 Page 9 of 12

Process connection with thread per EN 837-1

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] D SW

NS 100 [4"]

G ¼ B 80 [3.15] 13 [0.51] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

G ½ B 87 [3.43] 20 [0.79] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

Process connection with thread per ISO 7

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] D SW

NS 100 [4"]

R ¼ 80 [3.15] 13 [0.51] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

R ½ 86 [3.39] 19 [0.75] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

Process connection with thread per ANSI/B1.20.1

NS G Dimensions in mm [in]

h ±1 [0.04] S3 a b ±0.5 [0.02] D SW

NS 100 [4"]

¼ NPT 80 [3.15] 13 [0.51] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

½ NPT 86 [3.39] 19 [0.75] 15.5 [0.61] 48 [1.89] 107 [4.21] 22 [0.87]

14597764.02

NS 100 [4"], lower mount (radial)

NS Weight

NS 100 [4"] 0.8 kg [1.76 lb]

⌀

ISO

ANSI

□SW

WIKA data sheet PM 02.12 ∙ 01/2025 Page 10 of 12

Process connection with thread per EN 837-1

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e D SW

50 [2"]

G ⅛ B 53 [2.09] 30 [1.18] 10 [0.39] 6 [0.24] 55 [2.17] 14 [0.55]

G ¼ B 56 [2.20] 30 [1.18] 13 [0.51] 6 [0.24] 55 [2.17] 14 [0.55]

M12 x 1.5 56 [2.20] 30 [1.18] 13 [0.51] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"] G ⅛ B 53.5 [2.11] 32 [1.26] 10 [0.39] 6.5 [0.26] 68 [2.68] 14 [0.55]

G ¼ B 56.5 [2.22] 32 [1.26] 13 [0.51] 6.5 [0.26] 68 [2.68] 14 [0.55]

M12 x 1.5 56.5 [2.22] 32 [1.26] 13 [0.51] 6.5 [0.26] 68 [2.68] 14 [0.55]

Process connection with thread per ISO 7

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e D SW

50 [2"] R ⅛

53 [2.09] 30 [1.18] 10 [0.39] 6 [0.24] 55 [2.17] 14 [0.55]

R ¼

56 [2.20] 30 [1.18] 13 [0.51] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"]

R ⅛

53.5 [2.11] 32 [1.26] 10 [0.39] 6.5 [0.26] 68 [2.68] 14 [0.55]

R ¼

56.5 [2.22] 32 [1.26] 13 [0.51] 6.5 [0.26] 68 [2.68] 14 [0.55]

Process connection with thread per ANSI/B1.20.1

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e D SW

50 [2"]

⅛ NPT 53 [2.09] 30 [1.18] 10 [0.39] 6 [0.24] 55 [2.17] 14 [0.55]

¼ NPT 56 [2.20] 30 [1.18] 13 [0.51] 6 [0.24] 55 [2.17] 14 [0.55]

63 [2 ½"] ⅛ NPT 53.5 [2.11] 32 [1.26] 10 [0.39] 6.5 [0.26] 68 [2.68] 14 [0.55]

¼ NPT 56.5 [2.22] 32 [1.26] 13 [0.51] 6.5 [0.26] 68 [2.68] 14 [0.55]

NS Weight

NS 50 [2½"] 0.15 kg [0.33 lb]

NS 63 [2½"] 0.21 kg [0.46 lb]

NS 50 [2½"] and NS 63 [2½"], centre back mount

⌀D

ISO

S3 e

ANSI

□SW

31059155.04

WIKA data sheet PM 02.12 ∙ 01/2025 Page 11 of 12

Process connection with thread per EN 837-1

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e f D SW

NS 100

[4"]

G ¼ B 74 [2.92] 48 [1.89] 13 [0.51] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

G ½ B 81 [3.19] 48 [1.89] 20 [0.97] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

Process connection with thread per ISO 7

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e f D SW

NS 100

[4"]

R ¼ 74 [2.92] 48 [1.89] 13 [0.51] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

R ½ 80 [3.14] 48 [1.89] 19 [0.75] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

Process connection with thread per ANSI/B1.20.1

NS G Dimensions in mm [in]

b2 ±1 [0.04] b ±0.5 [0.02] S3 e f D SW

NS 100

[4"]

¼ NPT 74 [2.92] 48 [1.89] 13 [0.51] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

½ NPT 80 [3.14] 48 [1.89] 19 [0.75] 8 [0.33] 30 [1.18] 107 [4.21] 22 [0.87]

NS 100 [4"], lower back mount

NS Weight

NS 100 [4"] 0.8 kg [1.76 lb]

ISO

⌀D

ANSI

□SW

14571332.03

WIKA data sheet PM 02.12 ∙ 01/2025 Page 12 of 12

The specications given in this document represent the state of engineering at the time of publishing.

We reserve the right to make modications to the specications and materials.

In case of a dierent interpretation of the translated and the English data sheet, the English wording shall prevail.

01/2025 EN

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30

63911 Klingenberg/Germany

Tel. +49 9372 132-0

info@wika.de

www.wika.de

Ordering information

Model / Nominal size / Scale range / Process connection /

Connection location / Options

Congurator

Standard

articles